Learning Tia Portal With S7 1200 PLC;
This one is a basic course. I've already made 29 hours video about TIA Portal automation systems in Turkish. More lessons in English are coming up.We will use real hardware during our lessons. And we will
demonstrate how cable, pin etc. connection should be done.
The hardwares we use at our basic course are: Siemens s7 1214 dc/dc/dc CPU, communations module, buttons(no/nc), laser sensor.
You will learn how to add harware and how to use basic instructions, timers, counter, compare, analog input signals, show value in hmi.
Our goal is to learn information about Tia Portal software and hardware. Our cpu is S7 1214 DC/DC/DC. At first, we will learn how to add device. I am not going to be boring. So we will get to study quickly.
If we want create program.We must configure our hardware.Because of this we will add our cpu and module in our software.
Our cpu need know which one module and signal board we have.We must download our hardware feature to cpu.After we will be go online cpu and check everything is right.
Okey...We know something about software and hardware.Why we don't create program?
Let's start creating first network.We will use NO contact and coil.
We are very powerfull.Then start to learn diffrent command...NC / SET / RESET
We must know some rule for creating right program.I will tell you first important rule.Please watch this video two times..
Our new commands are SetBF/ResetBF and Positive/Negative signal edge
We will learn set-reset and reset-set flip flop command.
The machine systems some part are work by time.Because of this we must know timer command.The S7 1200 CPU have 4 diffrent timer command.TP/TON/TOF/TONR
If you need count something and compare ; our cpu has some command for this operation.The CTU command is counting in signal and we can use this value for operating our systems.
We learn a lot of command.So start learning data type.We will use Data type all time.We must know everything about data type.
We will connect NO and NC buttom in our hardware.After we will connect laser sensor and we will start to take value in analog input.
we will learn normx and scalex command.So we can calculate analog signals quickly and easly.
We will see how we can easly show value in HMI.
We will start to learn analog output systems.You can learn hardware systems and connections for analog hardware in this video.
Lets start programming analog outputs.
We can write speed value in HMI and take analog output..
My name is Orhan. I've been working with automation systems for almost 15 years. I am an electrical and electronic engineer.
I like to make video tutorials concerning automation systems. I have got over 100 hours video on the subject in Turkish language.
There are a lot of university teachers, students, technician and factory workers who use my video lessons. And now they're able to create machine and automation systems themselves.
I will make more tutorial If you like my video lessons.
I am a founder/owner of a TARIKCI engineering firm.
My company engaged in the following areas: Industrial Automation, Machine systems, Scada Systems, Automation course.
The brand-systems that we use are: Siemens TIA PORTAL (S71200 / S7 300 / S7 1500 / ET 200 PLC), Wincc Flex + V13 (HMI / SCADA ), Omron PLC / HMI, DELTA PLC / HMI, Panasonic PLC, Triomotion, Cimon PLC /HMI, Weintek HMI, Allen Bradley PLC, WinTr Scada