Find online courses made by experts from around the world.
Take your courses with you and learn anywhere, anytime.
Learn and practice real-world skills and achieve your goals.
This course is over 10 hours in length and will cover
everything from connecting to a router, configuring administrative tasks on the
router, learning the routers internal components such as RAM, ROM, NVRAM and
FLASH; learning how to manipulate the Registers on the router, backing up
configurations, using the CDP protocol, and all aspects of Static, Default and
Please Note: The Cisco Packet Tracer is a Cisco proprietary software and can only be given out by Cisco. So, if you hear me say in any of the lectures, that I would be providing the CPT, please disregard since I cannot do so.
DISCLAIMER: Please note that the simulators/emulators used in this course are not part of the course. It is the students responsibility to have these to practice with. The Cisco Packet Tracer and/or VIRAL (Virtual Internet Routing Lab) are Cisco proprietary software and can only be obtained through Cisco. It is up to each student to obtain the simulator/emulator of their choice to study along with this course.
If you are unable to get a hold of the CPT, remember that you have other options, like: GNS3, Boson or even live equipment.
It is recommended that you use any of the simulators mentioned above to follow along with the course.
Students will get a thorough understanding of how the routing process actually works and they will also learn how to configure all inter-networking components using the Cisco Packet Tracer (link attached for download), look for it under external .
Students will also be configuring RIPv2, EIGRP and OSPF and understand how to manipulate each routing protocols attributes to meet the requirements of the network.
This is a lecture based course using the Touch-IT Technology Smart board, which will make learning very interactive and engaging.
Hands on labs will be used to drill down the concepts learned in each lecture using the Cisco’s Packet Tracer.
My method will make you feel like you are sitting in a classroom environment and give you the most needed hands on experience!
Handouts will be available to facilitate learning and practice.
This course is designed to help the student become comfortable with the routing concepts and router administration…but it will also help in preparing them for any networking certification or Computer Science Degree; not to mention the fact, that for those already in the field, it will further
improve routing decisions in their particular networks.
Not for you? No problem.
30 day money back guarantee.
Learn on the go.
Desktop, iOS and Android.
Certificate of completion.
|Section 1: Introduction to Routing|
In this lecture I will explain as to what questions will be encountered in the CCNA certification and the hands on labs you will need to configure. Also explain which exam to take, better to take one exam instead of two, and discuss which exam to take the 200-120.
In this lecture you get familiarized with the Cisco Packet Tracer Simulator. You will learn how to navigate through the Cisco packet tracer, learn how to connect different devices using the proper cabling and just an overall look on the features of how the packet tracer works
|In this lecture you will learn about the Cisco IOS, the different types of routers fixed or modular. You learn how to connect to router using a console cable and use a terminal session to access the CLI. Also you will begin to learn the different prompts and commands you can type from that promt.|
|In this lecture we continue with the router administration commands, that include lines, username, encryption etc.... You will also learn how to configure for SSH connectivity.|
|In this lecture will finish with the administrative commands, will discuss the difference between DCE and DTE and finally learn how to backup our configurations to an FTP server.|
|In this lecture you will learn how work with the registry, how to view which registry setting your in and how you would interrupt the boot sequence if you needed to change the registry setting to bypass NVRAM to reset your password|
|This lecture explains the real world procedure when booting into your router in 0x2142, and to reset your password. It will also show you how to restore your flash if it would be missing or corrupt, and discussion on the CDP protocol.|
|In this lecture will finish off with the CDP protocol, I will show you how to telnet into another router and learn how to configure host tables to be able to ping or telnet by using host-names.|
|Section 2: Routing Basics|
|This lecture will explain the difference between what a routing protocol such as Ripv2, EIGRP or OSPF and a routed protocol such as IPv4 or IPv6 is.|
|In this lecture we will talk about what does routing really mean and the different types of routing, Default, static or dynamic and how would you make a decision on which one to use.|
In this lecture you will learn what exactly happens when information travels from one network to a different network. Show examples of routing tables and how they learned those routes.
|In this lecture we will start learning the Administrative Distances, configurations on static routes and default routes|
In this lecture we will create a 3 router lab from scratch and configure basic administration on the routers, then we will configure static routes and analyze what happens to the packet as we start configuring the routes and finally will add default routes to the stub routers and see what the routing table looks like.
|Section 3: Dynamic Routing|
|In this lecture we will discuss the differences between RIPv2, EIGRP and OSPF. We will discuss also which routing protocol to use base on infrastructure you are working with an manufacturer of the router. We will look at the different variables that we must look at that will help us decide which routing protocol to use.|
|In this lecture we will discuss how distance vector routing protocols choose to route a packet and how to avoid routing loops using Split-horizon.|
|In this lecture I will show you how to configure RIPv2 and explain to you what exactly is happening in the routing table.|
|In this lecture we will configure static routes using a higher administrative distance than RIP. We will also configure RIP and RIPv2 and analyze the routing tables behavior and how we would fix it so we can have full connectivity through the use of the RIPv2 routing protocol|
|Section 4: Enhanced Interior Gateway Routing Protocol (EIGRP)|
|This lecture gives a look into EIGRP and its features to include the DUAL algorithm and the tables it creates.|
|In this lecture we will focus on the calculation of the Feasible Successor, Successor, and Feasible Distance calculation with in the topology and routing table. Also discuss how a route qualifies as a Feasible successor.|
|In this lecture will learn how to calculate the metric manually using the K values of Bandwidth and Delay.|
|In this lab I will show how to manipulate the path of a packet by making the bandwidth higher. We will use the packet tracer utility to analyze the path of the packet|
|Section 5: Open Shortest Path First (OSPF)|
|In this lecture we discuss the features of OSPF, its configurations using wildcard masking and areas. We will focus on Designate Routers and Backup Designated Routers and how you can manipulate the election in OSPF to who will be the DR or BDR.|
|In this lab we will create the Multi-Access environment where OSPF creates an election, and we will manipulate that election through the use of Loop back addresses, and Priority numbers analyzing as we go through each step.|
|Quiz 1||34 questions|
|The following Quiz will test you on the subject matter of this course, and definitely IP's.|
2017 will be our year to achieve our many goals! ...yes, I include myself here as well.
If you are determined, ambitious and hungry for a new beginning...then 2017 should be your year!
...and how better to start or end the year than to get your Cisco Certification!
Whether you are interested in the CCNA R/S, the CCENT or even the CCNP Route or just want to understand the key topics of these certification exams, taking one or ALL of my courses, will get you a lot closer to that goal.
But, don't take my word for it...please take a look at the FREE previews (they are available in all my courses) and see for yourself.
As for me, 2017 will be the year of putting out new courses for different types of IT certifications among other things.
These will include, not just Cisco courses, but also CompTIA & Microsoft courses as well.
I also hope to complete my second book based on ALL the Routing Protocols among other projects that I want to complete in 2017.
So, yes, my schedule will be quite full and I love it!
What you wanted to know about me:
If you are tired of the same old methods of learning and want someone that is pretty much unconventional, but at the same time will provide you with an enjoyable learning experience in layman's terms...then please preview my courses and you will discover that I am your guy.
I am a Network Engineer with over 15+ years in the field and in the teaching industry. I hold the following certifications: CCNA, CCNA Security, CCNA Voice, Security+, Network+, A+, MCP, MCTS & MOS and since I passed the first of two test for the CCIE, I hope to complete the second half in 2017!
My teaching experience stems from teaching at institutions like Palm Beach Community College, New Horizons, Florida Career College (now Anthem College) and The Academy of South Florida, not to mention teaching at my own training facility in Miami, Florida and now being if several e-Learning platforms world-wide.
Having been in all sides of the spectrum; as a student, a teacher/trainer, and in the field, I believe this uniquely qualifies me to understand the student, and what they have been exposed to as opposed to what they really want to accomplish. These two are sometimes extremely conflicting and frustrating. That is why I teach in the manner I do and can relate to the student's rejection of the Status Quo.
I have taught corporate employees at MetroPCS (now T-Mobil) and have also taught IT professionals of companies like The Florida Marlins, Hospital personnel & Attorney's firms, among others, to guide them in acquiring their CCNA certification and/or their Microsoft certifications; like the MOS (Microsoft Office Specialist). YES!...I am also an applications instructor and also teach Word, Excel, PowerPoint and Access.
I teach in an unconventional way that allows for students to understand the subject matter and can therefore, not only prepare them for a Cisco and/or Microsoft certification exam, but apply my methods in the real world. I strive to give the student a greater opportunity to compete in the current job markets. Do I go above and beyond what is needed for a certification?...YES, I do!...because it's not only about getting a certification, it's also about making sure the student is prepared for a job interview and/or maintaining their current job by enhancing their skills. This is where I step in and make sure that the student is prepared for whatever they need and make them an asset to their employer. Everyone has different requirements and I make sure, or at least I try, to provide information for most scenarios.
My classes and/or courses are very simple and that's how I like to teach. I truly believe in "KISS",,,NO, I don't want to kiss you, what this means "keep it simple stupid" - If things are kept simple, easy and explained in a way that the student can grasp quickly and retain the information...then I have achieved my goal!
For those that do not know me yet, you may not be used to my style of teaching, but you will soon get accustomed to it :)... I'm very laid back, I try to make learning fun and I teach in layman's terms...no physics jargon or mumbo jumbo in my teachings. My courses are very interactive and extremely dynamic!...you will not find my lectures monotone or boring, because falling asleep, for lack of excitement, is just NOT an option. Just take a look for yourself at my video previews, which I always provide on ALL my courses, so you can determine if I'm the right guy to help you get your industry specific certifications. ;)
I certainly hope that after a careful review of my credentials & testimonials (you can Google it you know!), I'm the Cisco & Microsoft Instructor you're looking for!
Network Engineer, Cisco & Microsoft Instructor
- and -
Author of: "The Only IP Book You Will Ever Need!" now on AMAZON