Ultimate Wind Energy Course for Electrical Engineering
What you'll learn
- Types of wind turbines
- Rotor solidity and selection of number of rotor blades
- Power extracted by the turbine from the wind
- Betz limit and maximum rotor efficiency
- Factors affecting wind speed and density
- Applied force on the wind turbine, torque coefficient, and the importance of the TSR
- Wind turbine generator characteristics
- Effect of rotor diameter and generator size on power
- Wind turbines spacing
- Wind farm feasibility study
- Weibull and Rayleigh probability density functions
- Determination of Weibull parameters
- Determination of Weibull parameters using the graphical method
- Aerodynamics of wind turbines
- Pitch-controlled wind turbines
- Passive stall controlled wind turbines
- Active stall controlled wind turbines
- Maximum power point tracking in wind turbines
- Tip speed ratio (TSR) control
- Optimal torque control (OT) MPPT algorithm
- Power signal feedback (PSF) control
- Perturbation and observation (P&O) or hill-climb searching (HCS)
- Electricity generation using wind turbines
- Permanent magnet synchronous generator (PMSG)
- Wound rotor synchronous generator (WRSG)
- Doubly-fed induction generator (DFIG)
- Brushless permanent magnet DC generator (PMDC)
- Squirrel-cage induction generator
- Wound rotor induction generator
- Tubular steel wind turbine tower
- Lattice wind turbine tower
- Concrete wind turbine tower
- Hybrid wind turbine tower
- Brakes in the wind turbine
- Rotor brakes in the wind turbine
- Pitch drive or aerodynamic brakes in the wind turbine
- Simulation of a wind turbine system using the ETAP program
- MATLAB simulation of the wind turbine
- Cp plotting and lookup table in MATLAB
- MPPT in MATLAB Simulink
Requirements
- No prior knowledge except basics of electric circuits
Description
"Ultimate Wind Energy Course for Electrical Engineering"
The only course out there with everything you need to know about Wind Energy from A to Z
Throughout the course, you will learn:
Types of wind turbines.
Rotor solidity and selection of the number of rotor blades.
Gearbox in wind turbines.
The power extracted by the turbine from the wind.
Betz limit and maximum rotor efficiency.
Factors affecting wind speed and density.
Applied force on the wind turbine, torque coefficient, and the importance of the TSR.
Wind turbine generator characteristics.
Effect of the rotor diameter and generator size on power.
Wind turbines spacing.
Wind farm feasibility study.
Weibull and Rayleigh probability density functions.
Determination of Weibull parameters.
Determination of Weibull parameters using the graphical method.
Aerodynamics of wind turbines.
Pitch-controlled wind turbines.
Passive stall-controlled wind turbines.
Active stall-controlled wind turbines.
Maximum power point tracking in wind turbines.
Tip speed ratio (TSR) control.
Optimal torque control (OT) MPPT algorithm.
Power signal feedback (PSF) control.
Perturbation and observation (P&O) or hill-climb searching (HCS).
Electricity generation using wind turbines.
Permanent magnet synchronous generator (PMSG).
Wound rotor synchronous generator (WRSG).
Doubly-fed induction generator (DFIG).
Brushless permanent magnet DC generator (PMDC).
Squirrel-cage induction generator.
Wound rotor induction generator.
Tubular steel wind turbine tower.
Lattice wind turbine tower.
Concrete wind turbine tower.
Hybrid wind turbine tower.
Brakes in the wind turbine.
Rotor brakes in the wind turbine.
Pitch drive or aerodynamic brakes in the wind turbine.
Simulation of a wind turbine system using the ETAP program.
MATLAB simulation of the wind turbine.
Cp plotting and lookup table in MATLAB.
MPPT in MATLAB Simulink.
After Taking This Course, You Will Be Able To
Understand everything about wind energy systems, such as the basic components, factors affecting wind generation, the different probability distribution functions used to represent wind data, and wind feasibility study.
Understand different control systems used in the wind turbine and the types of electrical generators utilized.
You will be able to simulate the wind turbine system in both ETAP and MATLAB programs.
Bonus Gift:
You will also get the slides for the Wind Energy Course for those who are interested in them or have them as a revision for themselves
231 Pages of Wind Energy Course Slides.
Take this course if you've been looking for ONE COURSE with in-depth insight into Wind Energy.
Who this course is for:
- Wind enthusiasts
- Electrical power engineers
- Electrical students
- Anyone who wants to get knowledge about wind energy systems
- Complete beginners with zero wind experience
Instructor
- 4.5 Instructor Rating
- 5,986 Reviews
- 44,012 Students
- 9 Courses
I am Ahmed Mahdy an electrical power engineer, researcher, and the founder of Khadija Academy. I am also an electrical bestselling instructor and have helped more than 67,000 students from 191 countries achieve career success with simple and easy courses in the last 7 years. In addition to having a YouTube educational engineering channel called" Khadija Academy", where I regularly post videos related to electrical engineering. In 2018, I was nominated among the top 10% of instructors on Udemy, besides currently ranking among the top instructors in the engineering sector of Udemy.
Some of my published research works in the top electrical engineering journals worldwide:
1- Transient stability improvement of wave energy conversion systems connected to power grid using anti-windup-coot optimization strategy - Energy Journal - Impact Factor of 9.0.
2- Nonlinear Modeling and Real-Time Simulation of a Grid-Connected AWS Wave Energy Conversion System - IEEE Transactions on Sustainable Energy - Impact Factor of 8.8.
3- Modeling and optimal operation of hybrid wave energy and PV system feeding supercharging stations based on golden jackal optimal control strategy - Energy Journal - Impact Factor of 9.0.
4- State-of-the-Art of the most commonly adopted wave energy conversion systems - Ain Shams Engineering Journal - Impact Factor of 6.0.
In every one of my Udemy courses, you'll see that I am always available and always offer you support through each course. I will join your success and help you through any obstacles.
You'll notice that my courses get many 5-star ratings & reviews and my student satisfaction ratings also reflect this.
In the many positive course reviews, my courses get, most people like the Way I explain everything and the encouraging teaching style that I convey as well as how I get right to the point and walk you, step-by-step through Complex Ideas.
(You'll find my courses below this bio - and all of my courses have at least 10 minutes of free previews available to you, so you can quickly determine the courses that are right for you)
My courses can be watched 24/7 wherever you are.
You can also view them on mobile devices with the Udemy mobile app.