VMware Workstatation Lab Setup and Configuration!!

Learn to configure VMware networking by using the virtual network editor, bridging, and host-only networks, and allocate IP addresses with specific subnets for efficient VM management.

Explore how VMware Workstation creates virtual machines and network interfaces, bridging them to physical networks and using IP addresses, gateways, and the route table for host-guest communication.

install a vmware guest machine from a downloaded iso, create a new virtual machine, configure naming, storage location, and peripherals, then boot and log in with your initial credentials.

Bridge the Linux vm's network adapters to vmnet0 to enable internet access, assign IPs, and test connectivity with ping between host and guest.

Configure two interconnected virtual machines on the same subnet—Windows server and Linux VM—assign static IPs, and set gateways to enable vm-to-vm and vm-to-host communication using GNS3 as a virtual router.

Learn to integrate GNS3 with your VM environment, using a virtual router to enable complex network connectivity and simulate routers with imported IOS images.

learn how to integrate Gns3 with vmware workstation to connect linux and windows vms across two networks using a cloud bridge and a two-interface router.

Connect and configure VMware and Gns3 networks by assigning IP addresses to router interfaces, linking two vmnet networks through a gateway, then ping Linux and Windows hosts to verify connectivity.