
In this lecture, I will explain what the course will consist of.
In this lecture, we will quickly discuss how the IPv4 address is structured.
In this lecture will go over the classes of addresses that exist in IPv4.
Their range and default mask. We will also briefly look at the private
IP range in IPv4.
In this lecture, we will go over the different types of subnetting such as class-full and class-less subnetting.
In this lecture, we will discuss why IPv6 was brought on board and some of the new features that IPv6 has been equipped with such as “Auto-configuration”
In this lecture we will look at how to Identify the type of IPv6 address, we will break down the Network Prefix into its different sections to get a further understanding of it. We will also discuss the “Subnet mask” in IPv6 and what its intended purpose is used for.
In this lecture, we will discuss the different types of addresses that are new in IPv6, such as the Link-Local address and the Anycast address.
In this lecture, we will discuss how to enable unicast routing and how to configure IPv6 Addresses in the router interfaces using the EUI-64 format.
In this lecture, we will discuss how to manually assign IPv6 addresses to an interface of a router or a PC.
In this lecture, I will show you how to configure Ripng on our cisco routers.
In this lecture, I will show you how to configure EIGRP for IPv6 and discuss the differences from EIGRP IPv4.
In this lecture, I will show you how to configure OSPFv3 on your cisco router, and describe the differences between OSPFv2.
In this lecture, we will briefly discuss the transition mechanisms that are in place that helps us make the move over to IPv6, such as DUAL Stacking using both an IPv4 and IPv6 address on the router, 6to4 tunneling to get across a WAN from an IPv6 to an IPv4 network and NAT-PT if your using NAT in your company this would be a temporary solution to use.
In this lecture, I will explain why is it that we still have a need to subnet in IPv6
In this lecture, I will show you how to subnet in IPv6 using my binary method
This course is approximately 4 hours in length and will cover IPv6 protocol in detail. I will compare the differences between the IPv4 to IPv6, and the benefits that IPv6 brings to the future of networking.
DISCLAIMER: Please note that the simulators/emulators used in this course are not part of the course. It is the students responsibility to have these to practice with. The Cisco Packet Tracer and/or VIRAL (Virtual Internet Routing Lab) are Cisco proprietary software and can only be obtained through Cisco. It is up to each student to obtain the simulator/emulator of their choice to study along with this course.
Students will get a thorough understanding of IPv6 and how we would implement it in a real world environment.
We will discuss the format of an IPv6 address, and breakdown the different components, like the Network Prefix, Interface ID, what each 16 bit section does and specifically the subnetting section of IPv6. We will learn about the new types of addresses that comes with IPv6, its configurations using RIPng, EIGRP for IPv6, OSPFv3 using both static assigned addresses and the EUI-64 format. We will also learn about the transition methods such as ISATAP, 6to4, and NAT-PT.
This is a lecture based course using the Touch-IT Technology Smart board, which will make learning very interactive and engaging. Hands on labs will be used to drill down the concepts learned in each lecture using Cisco’s Packet Tracer.
My method will make you feel like you are sitting in a classroom environment and give the most needed hands on experience!
Handouts will be available to facilitate learning and practice.
This course will help the student become familiar with the use of IPv6, recognizing IPv6 addresses and how to implement them in your environment…but it will also help in preparing for any networking certification or Computer Science Degree; not to mention the fact that for those already in the field, it will further improve routing decisions in their particular networks.