Tekla Structures shop drawing R.C.C Building

Create and switch between multiple views for a Tekla structures R.C.C. project, adjust the center of rotation, and layout plan and 3D views across grid intersections.

Model base level RCC columns 60x25 cm and walls 25 cm in Tekla Structures, name them, apply concrete material, and set bottom at zero and top at three meters.

Model isolated foundations and strip foundations in Tekla Structures, setting dimensions 200 by 300 cm, depth 50 cm, and placing under columns and walls with correct top and bottom levels.

Model and annotate clear concrete cover below foundations in Tekla Structures, applying a 10 cm cover, detailing reinforcement, and visualizing via 3D and plane views for isolated and strip foundations.

Learn to draw ground beams in Tekla at the foundation base, with the top aligned to the foundation and the beam thickness equal to the foundation, between foundations or columns.

Copy columns and walls to upper stories in Tekla, using multi select and copy special linear at 3000 mm to cover four stories, then draw beams and slabs.

Draw beams: create concrete reinforcement beams of 30 by 50 cm in Tekla Structures, name them B1, set depths to 50 cm, and copy upward between sheet walls and columns.

Learn to model a curved beam in Tekla Structures for RCC buildings by defining the start point, center, end point, radius, and segment count to shape the reinforcement.

Use Tekla to draw a reinforced concrete slab, name it, set thickness, and define its path, then display foundation, ground beams, columns, beams, slabs, and clear cover.

In Tekla Structures, learn to draw foundation reinforcement on the base level, configure footing reinforcement from the table, and copy top and bottom bars to adjacent foundations.

Learn to model and annotate ground beam reinforcement in Tekla Structures, including stirrups, bar sizes, clear cover, and continuous beam reinforcement for RCC building shop drawings.

Apply wall neck reinforcement in Tekla Structures shop drawings, select and edit reinforcement groups, set sizes, insert stirrups, and calculate bars for columns and foundations.

Explore how to model column reinforcement in Tekla Structures for an RCC building, defining column shapes, placing longitudinal bars, configuring stirrups, spacing, and top level adjustments.

Explore how to model wall reinforcement in Tekla Structures, define longitudinal and transverse bars, set 15 cm spacing, apply mesh bars, and replicate reinforcement across walls.

Set up beams and slabs in Tekla Structures, apply reinforcement for beams and slabs, and adjust spacing, cover and direction to generate accurate slab and beam reinforcement layouts.

Organize the Tekla Structures project and assign numbers to elements to prepare the bill of quantities. Generate and export quantities for concrete volume and reinforcement to support RCC building estimates.

Learn to generate a general drawing of a foundation plane in Tekla Structures, set the plane, switch to 3D plan view, and configure drawing properties like name, layout, and scale.

Learn how to create general arrangement drawings in Tekla Structures for concrete tasks, using view filters, grid properties, and drawing settings to produce accurate foundation and plan views.