Tekla Structures (Concrete) From Scratch(Under construction)

Learn to model a concrete column in Tekla Structures, selecting base points, customizing rectangular and circular profiles, setting dimensions, materials, position, rotation, length, and numbering.

Explore rendering in Tekla Structures (Concrete) from scratch, switching view rendering among wireframe, shaded wireframe, greyscale, and stranded modes to review part geometry.

Learn to model a concrete beam in Tekla Structures from scratch, setting profiles and dimensions. Adjust material, camber, segments, offset coordinates, and beam prefix for accurate detailing.

Learn to create and modify polybeam structures in Tekla Structures (Concrete), selecting points, adding to selection with control, deleting beams, and using the middle mouse wheel to adjust options.

Learn to model a concrete panel in Tekla Structures from scratch, editing panel properties such as height, thickness, and material, then set position, rotation, offsets, and bending radius with segments.

Model a concrete slab in Tekla Structures and modify slab properties and name. Adjust thickness to 200, set material C25/70, finish, and position, then assign cast unit and phase zero.

Model a pad footing in Tekla Structures (concrete) from scratch by selecting profiles, materials, and levels, and adjusting depths and positions to create accurate footing geometry.

Model a strip footing in Tekla Structures, define start and end points, modify the profile and dimensions, adjust material, rotate, offset in 3d, and extend to length.

Master edit commands for Tekla structures: use polygon and line cuts, cut slabs and parts, undo with ctrl-p, fit and delete beams, and split or combine columns.

Learn to measure distances between points in Tekla Structures (Concrete), including horizontal, vertical, and inclined distances, angles, and arc radii using dimension lines and the data window.

Learn to copy and move objects in Tekla Structures, select items, use copy commands (Ctrl+C) with defined distance and copies, then move between points and undo with Ctrl+Z.

Master the mirror workflow in Tekla Structures (Concrete) from scratch, including selecting point pairs, using copy special mirror, moving with a 90 degree angle, and undoing changes.

Master basic zoom controls in Tekla Structures, including zooming in and out with the mouse, zoom region, zoom all objects, and zoom selected, using escape to finalize the selection.

Learn to represent Tekla Structures objects with color by class, phase, analysis, and attribute, adjust transparency, and manage visibility within object groups to customize part and beam visuals.

Explore view properties in Tekla Structures, adjusting rotation, angle, projection, and representation, and visibility to show concrete beams or steel beams using object groups.

Learn to add and manage clip planes in Tekla Structures, adjust cube view size, create and move planes inside or outside the model, and delete planes as needed.

Outline the work area in Tekla Structures by selecting views, adjusting zoom, and defining a rectangular area using two points and the mouse wheel to rotate.

Explore footing reinforcement by bars in Tekla Structures, creating reinforcing bars, adjusting diameter, length, hooks, and layout to define 3D footing details.

Explore footing reinforcement using border group in Tekla Structures, creating and editing bar groups, and applying spacing options such as equal distribution by number, target spacing, and exact spacing values.

Learn how to set up footing reinforcement components in Tekla Structures, including creating, spacing, number of bars, zone definitions, and modifying bar attributes for concrete footing design.

Learn to work with components in Tekla Structures (concrete): identify the component symbol, modify by selecting and double-clicking, group or ungroup, explode components, and edit reinforcing bar properties.

Learn to model rectangular column reinforcement in Tekla Structures, adding strand and rebar, adjusting sizes, spacing, cover, and arrangement to achieve proper structural detailing.

Explore circular column reinforcement in Tekla Structures, including setting main bar counts and sizes, adjusting cover, and configuring stirrups to ensure proper detailing and modeling.

Learn to add and customize beam reinforcement in Tekla Structures for concrete, including editing profiles, adjusting bar diameters and counts, setting cover, stirrup spacing, and shrinkage reinforcement.

Learn to add panel reinforcement in Tekla Structures, configuring cover, bar diameters, spacing, and primary and secondary reinforcement for accurate panel detailing.

Learn slab reinforcement in Tekla structures, adjust cover to 25 mm, set top and bottom bars to 16 mm with 200 mm spacing, and apply bending, splicing, and DTV attributes.

Learn to create mesh bars by area for a concrete slab in Tekla Structures, including drawing a slab, selecting the area, and editing or modifying the mesh bars.

Learn to add slab reinforcement in Tekla Structures, adjust bar diameter and spacing, set cover thickness, and configure primary and secondary bars in x and y directions.

Learn to select components, columns, beams, panels, slabs, reinforcement, and assemblies in Tekla Structures, using multi-select and edit tools.

Master the selection filter in Tekla Structures to group and select parts, components, old welds, and reinforcing bars, then change profiles, materials, and finish graphics, and apply updates.

Modify grid lines after building a Tekla Structures model by adjusting coordinates in millimeters and extending grids. Label grids A–E and 1–5, and view new grid‑driven references along the lines.

Model a column neck in Tekla Structures (concrete), set the profile to 300x500, adjust position and levels, rotate and copy components, and modify part labels for display.

Model pad footings in Tekla Structures (Concrete): edit points, set profiles and levels, copy and modify footings, and rename properties for accurate concrete footing design.

Learn PC footing modeling in Tekla Structures from scratch, set up properties and profiles, adjust dimensions and levels, and apply front view modifications for accurate footing construction.

hide footings, draw a beam between points, name it ground beam, and set profile depths of 500 and 300 and a 2000 mm length to model ground beams in Tekla Structures.

Model columns in Tekla Structures, using selection filter and copy special, then modify names, numbers, and levels for multiple copies with keyboard shortcuts like control tab, control i, and escape.

Model z beams by using the selection center, applying ground beams, and employing copy special to duplicate and adjust beam dimensions in millimeters, then modify and apply the changes.

Practice editing and drawing a slab in Tekla Structures, using plan view, thickness 180 mm, and material C25. Learn basic commands to modify, apply, rotate, cut, and select all.

Learn to copy columns, beams, and the slab in Tekla Structures (concrete) by selecting all and using copy, then switch to street view to review the model.

Model footing reinforcement in Tekla Structures (concrete) from scratch, detailing primary and secondary bars with 14 millimeter diameters and 200 millimeter spacing.

Learn to model starter bars for footing in Tekla Structures, adjusting view depths to 800 mm, configuring stirrup spacing, corner boards, and calculating development and lapping lengths.

Learn to add stirrups to the column neck in Tekla Structures, adjusting reinforcement, spacing, and cover. The tutorial guides selecting bars, copying reinforcement along the footing, and applying modifications.

Learn to add starter boards and stirrups for F2 reinforcement in Tekla Structures, edit components, and perform copy, rotate, and move operations to place and align reinforcement.

Add reinforcement to ground beams by defining top and bottom bars, setting stirrup spacing, editing lengths, and applying development length calculations per codes.

Learn to add reinforcement to a continuous ground beam in Tekla Structures, including top bars, bottom bars, stirrups, and prescribed cover, spacing, and 3D modeling across all beams.

Apply and edit reinforcement in concrete columns within Tekla Structures, set spacing and bar sizes, modify reinforcement attributes, and learn to select columns and apply changes quickly.

Add reinforcement for two columns, change the arrangement using double-click, adjust stirrups and ties, and set cover dimensions in millimeters.

Learn to add reinforcement to columns and story, switch to the 3d view control tab, and modify and apply stirrups for column C1.

Learn to add reinforcement to beams, adjust stirrups spacing and radii for top and bottom bars, and verify changes in a 3d view.

Learn to add reinforcement to a continuous beam by configuring main bottom bars, top bars, stirrups, and cover, and adjusting spacing, section, and length within the Tekla Structures workflow.

Apply slab reinforcement in Tekla Structures by placing bars, using T12 and spacing 200 mm, adjusting offsets to extend minus 250 mm, and applying attributes for bars.

Master numbering in drawings and reports by selecting all objects, applying numbers to all elements (beams, slabs), then modify part labels and use double-click to display and remove as needed.

Learn to manage concrete objects and reinforcement in Tekla Structures, perform quantity takeoffs, calculate volumes, densities, and group by profile and top level for accurate bills of quantities.

Change units and settings in Tekla Structures (Concrete) from scratch, switching metric and US imperial, and decimal and fractional formats. Adjust distance, precision, length, and weight to kg.

Explore reinforcement lists in Tekla Structures, detailing rebar sizes from 8 to 18 mm, weights, quantities, and scheduling for beams, footings, and ground beams.

Learn to generate reinforcement quantity tables for any object in Tekla Structures (Concrete), calculating bar and stirrup weights, lengths, counts, and combining identical items with the built-in calculator.

Create a GA drawing in Tekla Structures by right-clicking to generate it and selecting views. Then modify the name, scale, colors, symbols, and labels, and add detail and section views.

Configure and edit mark elements in Tekla Structures by adjusting assembly position and profile, renaming profiles, and modifying material, finish size, visibility, font color, and leader lines.

Modify object representations in Tekla Structures (Concrete) From Scratch, adjusting port outlines, symbols on lateline, bounding boxes, line visibility, center lines, hatch colors, and reinforcement bar representations.

Filter by part name to show only EF1, modify visibility, add lines, and hide nonmatches; apply the same approach to C1 and C2 with modify and hide options.

Save a GA template after modifications and reuse it for other drawings. Load and modify standard templates to create 3d drawings with grids and reinforcing bars.

Master the drawing tab commands in Tekla Structures (Concrete) to create elevation drawings, edit parts, add reinforcement and annotations, and customize frames, leader lines, and text.

Learn to edit dimension properties in Tekla Structures, including line movement, spacing, extension lines, grid lines, units, precision, and text color, height, font, and frame.

Learn dimensioning in Tekla Structures by creating horizontal and vertical dimensions through point-to-point clicks, building continuous dimensions, and editing dimension properties with a double-click.

Learn how to add and remove dimensioned points in Tekla Structures by clicking points, using the dimension line, and pressing escape to remove points.

Learn to link, unlink, and combine dimensions, and flip outside dimensions in Tekla Structures (concrete) from scratch, using select, modify, and flipping commands to position lines accurately.

Explore elevation templates in Tekla Structures (Concrete) from scratch, learning to modify elevations, apply innovation templates for footing columns, adjust scale and view properties, and edit lines, grids, and frames.

Learn to create a foundation plan drawing in Tekla Structures (Concrete) from scratch, including setting up a general arrangement drawing, adding ground beams, hatch patterns, and dimensioning.

Explore creating ground-beam sections in Tekla Structures from scratch, including section views, snaps, scale and label management, reinforcement layout, and foundation plan modifications.

Export a drawing to AutoCAD from Tekla Structures, learn to add and manage dimensions, edit view properties, adjust layer options and scale, and customize export settings.

Learn to set up drawing layouts in Tekla Structures, navigate drawing properties and reports, and manage tables, including rebar banding schedules, revisions, titles, and multi-part tables.

Master cast unit drawing properties in Tekla Structures, covering drawing properties, unit definitions, view creation and labels, scale settings, reinforcement, and end-user defined attributes.

Create and annotate a guest unit drawing for F1 cast unit, adjusting views, scales, and reinforcement details, including city views, section views, dimensions, hatch patterns, and a rebar bending schedule.

Learn to create a C1 cast unit drawing in Tekla Structures (concrete), edit features, add reinforcement marks and hatch, set dimensions and labels, and generate the schedule.