Tekla Structure Project Warehouse Course

Create a grid in Tekla Structure project warehouse by configuring grid properties, setting x and y spacing (10,000 mm and 20,000 mm), naming grids, and adjusting elevations and views.

Create and place the column, adjust its profile, material, color, and part numbering, set bottom and top elevations, rotate to the correct orientation, and finalize all columns.

Create and customize a rafter end connection in Tekla Structure by adjusting properties, thicknesses, board size, gaps, and alignment, using 3D view and control tools.

Create and customize a rafter joining plate connection in Tekla Structure, selecting the joining plate, adjusting port endpoints, and applying dimensions and tolerances for a precise fit.

Create a base plate in Tekla Structure, adjust its size, height, and thickness, set gaps and positions, and configure numbering and connection details for a complete structural element.

Calculate the gap, then place and customize the cap plate under the grid, adjusting thickness, material, and naming; copy connections to ensure proper assembly in Tekla Structure.

Create a crane support beam in Tekla Structure, place and align it, set size and profile, apply color and numbering, and establish essential component connections.

Learn to create a stiffener plate in Tekla Structure by defining plate thickness and port marks, placing it on columns and beams, and adjusting radii and connections.

Create footing in Tekla by configuring footing profile and elevations, place on ground with a base plate, then copy and align frames in 3D to complete the footing assembly.

Create a base plate for a relocation post in Tekla Structure, configure connection properties, adjust dimensions in 3D view, and finalize the connection in the Tekla Structure Project Warehouse Course.

Create a pad footing for a post by selecting the view, choosing concrete and dimensions, then set the location, adjust minus 20, copy the location, and review in 3-d view.

Create a post cap plate connection in Tekla Structure by selecting the post, beam, and plate, configuring properties, placing bolts, adjusting rotation, and mirroring for multiple grids.

Create the side cladding girt by placing points, setting 90-degree properties, and checking the 3d view, then copy and mirror connections to complete the assembly.

Create and place roofing sheets in a Tekla Structure model by selecting beams, placing sheets in a 3d view, copying and mirroring sheets, and adjusting color and properties for accurate quantity.

Create sheets for right and left side cladding by copying properties, rotating 3d views, and aligning to plan view, then mirror and copy sheets to the opposite side.

Create ridge flashing in Tekla Structure by selecting profiles, using folder plates, setting thickness and material, and aligning gaps and overlaps in 3-D view for a precise installation.

Create corner flashing in Tekla Structure for the project warehouse course by selecting and configuring flashing, snapping corners, mirroring and aligning parts, and verifying in 3D view to fill gaps.

Create a middle rain gutter in the Tekla Structure project by selecting a profile, adjusting dimensions, applying material, and placing points and perpendiculars for a complete gutter.

Create drain pipes or downspouts by adjusting properties, setting minimum radii, applying bends and rounding, then place, copy, mirror, and edit in 3-D with flashing.

In Tekla Structure's clash check, select the object, open manage, and review clashes; note that minor clashes are not critical and can be left, while major clashes must be removed.

Apply a numbering series to selected objects in Tekla Structure, then save and manage new item orders, with options to modify objects and create drawings and reports.

Create assembly drawings by selecting columns and parts, setting drawing properties, and configuring views, dimensions, and annotations to assemble a complete drawing with a material list.

Create single part drawings in Tekla Structure by selecting parts, configuring joint and parent properties, and generating drawings via the document manager with automatic updates after changes.

learn to create and print Tekla structures drawings by selecting parts, opening the drawing, viewing the 3d representation, and printing the final document quickly.

Learn to create nc files from a Tekla structure model by selecting parts, exporting them, and organizing the output in a model folder with plates and profiles.