TEKLA STRUCTURES 2024 COURSE

Learn to create grid lines and elevations in Tekla Structure 2024, including setting view depth, defining 6 m grid spacing, and establishing foundation to roof elevations for a warehouse.

Learn to create views along grid lines in Tekla Structures, rotate the model in 3d with ctrl+middle mouse or rotate with mouse, and add views to visible views.

Tekla Structures 2024 course: create pad footings, set profile and material to C25, centralized at -1.5 m with 350 mm thickness, then copy across grid lines.

Create a 400 by 600 mm stop column with the column command, set grid 25 and class 13, and copy to grid intersections in 3d, plan, and elevation views.

model steel stanchions in Tekla Structural 2024 using universal beam profiles, S275 steel, and centralized positioning; switch to plan view with ctrl p and replicate across grid intersections.

Explore Tekla structures 2024 workflow for modeling rafters from grid placement to creating and mirroring type beams between supports, with precise copying in 3D.

Model the prison system bracing in Tekla Structures 2024 to stiffen the structure in x and y directions with vertical and roof bracing using 60x60x6 angle irons.

Model purlins in Tekla Structures 2024 by aligning pull lines with rafters in plan view, applying offsets and spacing, and verifying alignment in 3d.

Explore Tekla Structure 2024 module three: introduction to connection design, comparing simple and rigid joint design, beam-to-beam and beam-to-column connections, and welding vs bolting strategies.

design a pin base plate for a portal frame in tekla structure 2024, selecting base plate 1042 from the connection vault and configuring anchor rods, washers, nuts, and bolt spacing.

Create a moment connection for a porter frame using the eave haunch in Tekla Structure, defining plates, hinge and rafter profiles, bolts and boots spacing, and applying it across frames.

Learn how to define an apex haunch connection in Tekla Structures 2024, detailing plate and bolt parameters, haunch dimensions, and applying consistent changes across rafters.

Create a single-sided beam-to-column end-plate connection in Tekla Structures 2024, using end plate 144 and adjusting notch, offsets, and plate dimensions for a clean, shared connection.

Create a double-sided end plate connection using the two-sided template in Tekla Structures 2024. Edit plate values and notch, address clashes with editing or poly cut, then replicate for connections.

Flip braces to face upward, then create a corner brace connection using the brace corner simple component. Adjust brace type and properties, then apply changes to finalize the connection.

Create the middle brace connection in Tekla structures 2024 by selecting brace middle simple, choosing the rafter and peak secondary parts, and applying default or adjusted parameters.

Create a polyline connection in Tekla Structures 2024, starting from default settings, shape lines into an l-shaped configuration, set plate and boot specs, and replicate connections across rafters.

Learn to edit and cut complex elements in Tekla Structures 2024 course by applying poly cut and poly quad commands to create notches, resolve clashes, and copy cuts across members.

Discover how Tekla Structures assigns path numbering and assembly numbering to model members by applying number series to selected objects and updates with number modified object after changes.

Create and configure 3d perspective drawings in Tekla Structures 2024 by setting drawing properties, creating ga drawings, adjusting scales (1:75, 1:100, 1:150), fitting views to layout, and exporting as pdf.

Create foundation and roof plans for a warehouse in Tekla Structures by loading steel GA plans, fitting to the work area, labeling members, applying automatic dimensions, then saving and printing.

Create grid elevations by loading elevations, setting scales, and labeling members with applied properties. Build detail views and a section to document base plate, dimension lines, and prepare prints.

Learn to create a new Tekla Structures project, select UK/SE Asia or Middle East environments, set the role to steel detail, and explore the user interface, views, and document manager.

Master Tekla Structures 2024 basics: set up environment and rule, start a steel detailing project, define grids and elevations, and model foundations, columns, and rafters.

In Tekla Live Class 3, learn to reinforce a moment frame with X-bracing for stability, use type beams to connect members, and model roof bracing via mirroring and work planes.