
Explore the graphical user interface of Tekla Structural Designer, navigating the ribbon, tabs, and windows to model and design, view 3-D plans, and manage project workspace, properties, and scene content.
Create a single 2D frame in Tekla structural designer, define grid, levels, and materials, then apply loads for analysis and design.
Create a multi-material 3D frame in Tekla Structural Designer, modeling beams, slabs, and decks, applying gravity and imposed loads, defining load cases and combinations, and validating and analyzing the structure.
Design structural elements after analysis using steel and concrete, choose design options, run gravity and auto design, adjust reinforcement, and apply wind and equivalent horizontal forces in Tekla Structural Designer.
The TSD – (Tekla Structural Designer) Modelling Fundamentals is a course that goes through the process of designing the structure of your building. The course is split into four sections which are listed below:
1. Introduction of Graphical User Interface
2. Material Modelling 2D
3. Multi-Material Modelling 3D
4. Design
The learning outcome of the course is that you will learn how to navigate through the software when designing your structure from setting the gridlines and levels to the results of your design.
In lecture 1 you will learn the navigation of the interface and set it to your preference.
In lecture 2 you will learn how to set the pre model settings, construction levels and gridlines, element releases, applying 2D loadings and validation, Analysis and viewing graphical results.
In Lecture 3 you will about the copy command, placing structure elements, panel loadings, roof structures, Timber floor, load combinations and validation and analysis results.
In Lecture 4 you will about the design elements, for example, Design options, review mode, design member of concrete & Steel, Lateral loading wind loadings and finally outputting reports and generating drawings.
After completing this course you will have the basic knowledge on how to design a structure in various materials for example Steel, Concrete and Timber.