Structural&Construction Design of 2000m2 real Project Villa

Name: Structural&Construction Design of 2000m2 real Project Villa
Rating: 4.1 (77 reviews)

Modeling, analysis and design of 4 stories Villa in UAE using CSI ETABS and SAFE software + Construction Step by step

Created byAhmad Traboulsi

Last updated 7/2023

English

English [Auto],

What you'll learn

Introduction to Structural design Concept
How we can begin with structural design of a Villa
Check of safety of the villa with many methods with complicated and challenged topics in structural design of the Villa
How to use ETABS and SAFE to modeling, Analysis and Design of the Villa

Course content

6 sections • 14 lectures • 3h 43m total length

Introduction6:52
Explore the full structural design and construction of a 2000 m2 villa, from AutoCAD planning and architectural integration to analysis, design of footing, slabs, beams, and deflection checks.

Introduction part 2 waffle slab type 116:29
Explore waffle slab type 1 as a two-way system with 1–2 m rib spacing for parking, live load 5 kN/m2 and dead load 3.5 kN/m2, and Etabs thickness design.
Introduction part 2 Waffle Slab type 24:26
Explain waffle slab type two for a parking story, set rib spacing to 0.8 m, treat as a two‑way slab, outline beam dimensions with hidden and drop beams in etabs.
Introduction part 2 One Way Ribbed Slab2:53
Explore one way ribbed slab design, contrast with waffle slab, and note rib direction, live loads of 2 kN/m2, dead loads, and 38 cm height for residential storey.
Introduction part 2 solid slab2:50
Explore solid slab design, compare with flat slabs, and determine interior beams and drop beam sizes, including a 16 cm slab and 25 by 50 cm drops.
Introduction part 2 Flat Slab3:02
Explore flat slabs without interior beams, use a steel grid and concrete. Determine thickness from l over 33 with 3 kN/m² load and 2 kN/m² live load, using drop beams.

Prepare AutoCad File and insert the drawing into Etabs + Modeling50:23
Prepare an AutoCAD plan with structural layers for slabs, columns, and walls, then model basement to second floor in Etabs by importing dxf and drawing walls, openings, and retaining walls.
Modeling Part 219:23
Extend the etabs model for 2000 m2 villa by refining columns and shear walls, adding a retaining wall, configuring a flat slab system, and defining loads for analysis.
Analyssis and Design Part33:35
Analyze earthquake resistance using Etabs to verify seismic performance of a 2000 m2 villa, including shear wall and column design, slab analysis, and foundation detailing.

Difference between Swimming Pool and Water tank2:33
Compare underground swimming pools and water tanks, showing the same design steps for rectangular and circular shapes, with dimension changes and soil load considerations for above-ground tanks.
Water Tank design in SAP200037:45
Design and analyze underground and upper ground water tanks in SAP2000 for a 2000 m2 villa, including raft, walls, roof, loads, soil and water pressures, joint patterns, and reinforcement design.
Design circular section18:37
Design and analyze a circular water tank in SAP2000, covering cylinder geometry, loads, soil pressure, and bearing capacity checks.

Requirements

No programming experience needed you will learn everything in this course

Description

This course not just a tutorial on software ETABS and SAFE but it is a complete understanding about structural design analysis, how civil engineer must begin with the project, how he/she must think, how we can determine the dimension of the element before modeling them check it in the software. In this course we will design a 4 stories Villa in UAE, within the work we will show you how to select the best type of slab type for this Villa, also how to select the best type of foundation. Also during the design we will show very complicated and challenged topic in the structural design of the Villa for example:

1- What type of slab we must choose: Ribbed Slab, Solid Slab, Flat Slab ?

2- The largest span which increase the bending moment loads on the beams.

3- Check of the short and long term Deflection of the Slabs.

4- Select the best type of foundations (Isolated or combined or Raft foundation).

5- Design of the swimming pool of the Villa using Sap2000 Software.

6- Design of the water tank of the Villa using Sap2000 software.

In the structural design of this villa you will learn all the steps that help you to modeling analysis and design of any project in ETABS and SAFE (Import AutoCAD file, create and define grids, define materials, define sections, define loads, Modeling, Analysis of the loads, Design the structural element, export loads from ETABS to SAFE to design slabs, beams and foundation, Export from AutoCAD to ETABS learn the correct method to import AutoCAD file into ETABS.

Who this course is for:

Beginner and Expert Civil Engineering or students who want to learn structural designing.

Structural&Construction Design of 2000m2 real Project Villa

What you'll learn

Explore related topics

Course content

Introduction1 lecture • 7min

General Civil Engineering Knowledge5 lectures • 30min

Etabs & Safe3 lectures • 1hr 43min

Swimming Pool Design3 lectures • 59min

Construction1 lecture • 23min

General1 lecture • 1min

Requirements

Description

Who this course is for: