Siemens Tia Portal - S71200 PLC-Motion Control

Name: Siemens Tia Portal - S71200 PLC-Motion Control
Rating: 4.0 (172 reviews)

servo motor control with puls-dir signal ( panasonic servo systems example)

Created byOrhan TARIKCI

Last updated 9/2017

English

What you'll learn

**code :NISAN2026
Servo Motor System
Puls+Dir Signal
S7 1200 motion system
S7 1200 Motion command
S7 1200 - Servo wiring
Panasonic servo setting-Panaterm software
Control Servo motor with puls-dir signal
Siemens HMI (Wincc v14)
Siemens Scada(Wincc v14)
Tia Portal V14
More than 2 Hours Video
Control Step motor with puls-dir signal

Course content

1 section • 18 lectures • 2h 21m total length

Let's Start3:12
Start programming with TIA Portal V1412:50
Tia Portal Quiz-1
Make a connection between step motor driver to s7 1212 plc5:06
Connect and configure a step motor driver to an S7-1212 PLC by wiring power, enable, pulse, and direction signals, and verify the drive operation through the control signals.
Step motor quiz
Using commissioning system on TIA portal v142:18
Explore how to use the commissioning system in TIA Portal v14 to configure and run a motor with S71200 PLC, set home and target positions, and verify system readiness.
Tia Portal Quiz-2
Using commissioning system on TIA portal v14 -23:46
Using commissioning system on TIA portal v14 -38:55
Make a program for control stepper motor with Tia Portal V149:43
Make a program for control stepper motor with Tia Portal V14-26:31
Make a program for control stepper motor with Tia Portal V14-38:04
Motion control command Quiz
HMI programming with Wincc V1413:32
Panasonic Servo and Panaterm Software8:21
Panasonic servo wiring and Start programming TIA Portal V147:26
Connection between servo drive to s7 1212 plc6:05
Using commissioning system for servo system12:17
Commission a servo system in Siemens tia portal by verifying connections, performing factory resets, enabling the drive, and configuring home position, speed, and pulse-based movements.
Make a program for control servo motor with Tia Portal V1411:53
Develop a servo motor control program in TIA Portal v14, set home and zero positions, and command precise rotation using speed, pulse signals, and directional control.
Add HMI and Ind. Switch to system6:51
HMI programming with Wincc V14-211:46
Master hmi programming in WinCC v14-2 within Siemens tia portal to design and simulate motion control interfaces for S71200, including text elements, on/off controls, data blocks, and system status visualization.
Controling servo system with hmi and plc3:10

Requirements

Finished Siemens Tia Portal - S7 1200 PLC -Basic
Finished Siemens Tia Portal - S7 1200 PLC -Basic-2
Tia Portal V14 Software
Basic information about servo and stepper motor

Description

This course about servo motor systems.We will control panasonic servo motor systems with puls and dir signals.

We must use the transistor output PLC. Because of thiswe will use S7 1212 dc/dc/dc. S7 1200 plc can control 4 servo motors with pulse-dir signals.

Pulse signal determines the motor speed and position.100,000 pulses per second sent at Total.

Dir signal determines the direction of rotation of the motor.

Servo motor control ways:

1-Puls and dir signal ( for positioning)

2-Analog signals (for speed and torque control)

3-Comminacitons (for positioning , speed and torque control)

We will use option 1 for this course.This method can be used for all servo and stepper motor systems.

We will continue to use real hardware.

Our harware and software list :

1-Tia portal v14 pro

2-Wincc V14 Adv.

3-Panasonic panaterm software

4-KTP 400 HMI

5-Siemens S7 1212 DC/DC/DC

6-Panasonic Minas A5 0,4 KW servo system

7-Stepper motor and driver

Will examine all motion commands, and we'll use in our examples.

S7 1200 plc systems have this servo commands :

MC_Power
MC_reset
Mc_home
Mc_Halt
MC_MoveAbsolute
MC_MoveRelative
MC_MoveJog

Who this course is for:

technician
student
engineer