SolidWorks Intro & Solidcam& Solid Edge & NX Mold Wizardعربي

Name: SolidWorks Intro & Solidcam& Solid Edge & NX Mold Wizardعربي
Rating: 5.0 (8 reviews)

Solid Works basics & Solid CAM Basics (CAD-CAM) & Solid Edge Modelling Basics & NX Mold Wizard & NX Sheet Metal عربي

Created byMohamed Gamal

Last updated 2/2025

Arabic

What you'll learn

ستتمكن من احتراف عمليات الصاج المختلفه
ستتعلم خطوات حقن البلاستيك وعمل الاسطمبات
ستتمكن من عمل جزء ثلاثى الابعاد شامل كل التشكيلات المطلوبه
After successfully completing this course, you should be able to Set up default standards and creation preferences.
After successfully completing this course, you should be able to Use NX Sheet Metal tools to create base features and add more advanced features to them.
After successfully completing this course, you should be able to Use the Sketch Task Environment to create and edit profiles for sheet metal parts.
After successfully completing this course, you should be able to Edit parametric features.
After successfully completing this course, you should be able to use Design Intent to plan and create NX Sheet Metal parts.
After this course, you will be able to make injection Mold using NX
You will be able to use Solid Edge 2022 CAD for 3D parts & Surfaces.

Course content

9 sections • 89 lectures • 7h 23m total length

Introduction1:03
Introduction and Injection Mold Overview10:56
Sheet Metal Introduction1:48
NX Sketch & Extrude Overview ( Sheet Metal Prerequisites )9:03

Sheet Metal Base (Tab)5:26
Sheet metal base features serve as the foundation for creating more complex
sheet metal parts.
Sheet Metal Flange & Contour Flange5:31
- The proper creation of flanges is critical in sheet metal design. You need to
know how to create and edit flanges in order to produce unique, valid profile
designs.
- The Contour Flange is a commonly-used base feature. You can create a series
of planar and bend regions using a single sketch to create the profile. This
lesson introduces you to the Contour Flange feature.
Sheet Metal Bend Options7:22
Bending and unbending sheet metal is an essential part of sheet metal
design. Creating Bend features, unbending them, and then rebending them
is the subject of this lesson.
Sheet Metal Corner Options4:11
The Types of corner treatments will be the topic of this lesson.
Sheet Metal Bend Options and Cut-out3:42
Creating different types of sheet metal cutouts is an essential part of
designing usable sheet metal parts.
Sheet Metal Three Bend Corner1:07
Sheet Metal Joggle Advanced Flange Lightening Cut-out3:23
Convert part to Sheet Metal2:34
As an alternative to creating a sheet metal part from scratch, you can use
parts created in the NX Modeling application or import them from other CAD
systems. You can then use the Convert to Sheetmetal command to make
them into valid sheet metal parts.
Sheet Metal from Solid1:13
Complex geometry can make creating individual flanges cumbersome. The
Sheet Metal from Solid command greatly simplifies and streamlines this
process. It also provides a type of workflow familiar to users of I-deas Sheet
Metal.
Analyze Formability – One-step2:40
Metaform Part 11:48
Use MetaForm to unform complex geometry to an alternate shape. This
command also works with non-sheet metal features and takes material
characteristics into account.
Metaform Part 23:04
Use MetaForm to unform complex geometry to an alternate shape. This
command also works with non-sheet metal features and takes material
characteristics into account.
Sheet Metal Features5:15
The remaining Sheet Metal Features
Sheet Metal Feature Pattern5:54

Solid Cam Introduction1:16
Solid Cam Operations General Steps2:25
Solid Cam Create New Part & Open Existing Part1:43
Solid Cam Create New Milling Part3:35
Solid Cam Identify the CNC Machine1:34
Solid Cam Identify the Coordinate System2:05
Solid Cam Identify the Stock & Target2:23
Solid Cam Identify the Operation (Geometry & Tool)3:30
Solid Cam Calculation Tool Path, Simulate & G Code Extraction4:00
Solid Cam Roughing Operation From Start to End5:25
Solid Cam 2.5D Operations Introduction2:12
Solid Cam 2.5D Operations (Face Milling)2:53
Solid Cam 2.5D Operations (Face Milling Specific Options 1)3:48
Solid Cam 2.5D Operations (Face Milling Specific Options 22:20
Solid Cam 2.5D Operations (Pocket Milling)3:31
Solid Cam 2.5D Operations (Pocket Milling- Contour & Hatch Technology)2:59
Solid Cam 2.5D Operations (Pocket Milling- Contour Finish& Plunging Technology)2:11
Solid Cam 2.5D Operations (Pocket Milling- Harch Technology Specific Options)2:30

Requirements

مبادئ اعمال الصاج
NX Interface
مبادئ حقن البلاستيك

Description

هنتعلم اساسيات السوليدورك
هنتعلم اساسيات السوليد كام
ستتعلم خطوات حقن البلاستيك وعمل الاسطمبات
الكورس يقوم بتغطيه خطوات حقن البلاستيك
احتراف اعمال الصاج فى خلال ساعتين فقط
ستتعرف على كل عمليات الصاج المختلفه
بعد الكورس ستتمكن من عمل اى جزء صاج بكل سهوله واحتراف
يوجد تطبيقات مختلفه للتعرف على كل عمليات الصاج

Description

This course addresses all the tools available in the NX Sheet Metal application for creating machinery, enclosures, brackets, and other parts normally manufactured with a brake press. It shows how to create base features like tabs and contour flanges, and build on them with more advanced features such as gussets and louvers.
You will be professional user in NX Sheet Metal after only 2 hrs.!!
This Course covers conclusion of All Sheet Metal commands that you will use during your actual work, the idea of this course to provide small course with low price contains NX Sheet Metal Summary.
The idea of this course comparing to other courses are, The low price, low no of hrs., after course technical support.
This Course is a summary of actual experience in Sheet Metal field, the course has been designed to allow you to use the NX Sheet Metal after only 2 hrs.!
After this course, you will be able to use the NX Sheet Metal to do any part o sheet metal.
After this course, you will be able to make injection Mold using NX
You will be able to use Solid Edge 2022 CAD for 3D parts & Surfaces.

Notes:

يتم تحميل اجزاء للممارسه
يحتوى الكورس على تمارين وتطبيقات مختلفه
ستتمكن من استخدام البرنامج بعد اول محاضرتين فقط
مبدا الكورس انك ستتعلم اكبر قدر من المعلومات فى اقل وقت ممكن
سيتم الرد على كل الاسئله الخاصه بالكورس
You will download all parts that we used during the course.
The implementation of this course is in NX 11 but you will be able to implement using any version.
You will be able to use NX Sheet Metal after first Lecture.
You will have full technical support.
You will learn SolidWorks basics.
You will learn Solid Cam basics.

Who this course is for:

فنى اعمال الصاج
مهندس اعمال الصاج
Mechanical Engineer related to Sheet Metal Field
فني ومهندس حقن البلاستيك

SolidWorks Intro & Solidcam& Solid Edge & NX Mold Wizardعربي

What you'll learn

Explore related topics

Course content

Introduction4 lectures • 23min

NX Mold Basics9 lectures • 36min

NX Mold Mini Examples6 lectures • 39min

Full Mold Example4 lectures • 17min

NX Sheet Metal base features14 lectures • 53min

NX Sheet Metal Exercises9 lectures • 1hr 18min

Solid Edge Modelling15 lectures • 1hr 46min

Solidworks Introduction10 lectures • 41min

Solid Cam Basics18 lectures • 50min

Requirements

Description

Who this course is for: