Siemens NX Encyclopedia

Name: Siemens NX Encyclopedia
Rating: 4.5 (66 reviews)

Modeling, Drafting, Assembly, Animation Designer, Synchronous Modeling, Surface Modeling

Created byEkim GUNDOGDU

Last updated 12/2024

English

What you'll learn

Modeling,Drafting,Assembly Modules plus
Synchoronous Modeling , Animation Designer Modules
with engaging videos
and lots of examples files and homework

Course content

8 sections • 85 lectures • 4h 24m total length

Introduction1:29
Course Overview
Settings Before We Start1:04
This video teaches how to apply necessary settings to make sure that we use same user interface
How To Open Practice Files0:43
This video teaches how to import 'Practice Files' provided with this set.
How To Navigate Inside NX2:42
This video teaches how to navigate inside Siemens NX
Orthogonal Views1:24
Rendering Styles1:06
Selection4:44
This video teaches how to select objects in details.

Phone Holder V15:45
In this video, we start with basics shapes and learn to model a 'Phone Holder'
Phone Holder V24:53
In this video, we are going to model the same holder with another approach.
Phone Holder V35:01
In this video, we are going to model the same holder with a third approach.
Phone Charger 14:08
Phone Charger 24:03
Homework1:04
A quick homework to practice what we have learned.
Battery 13:00
In this video, we are going to model a 'Battery'
Battery 24:27
Homework 21:04
A quick homework to practice what we have learned.
Ashtray 14:21
In this video, we are going to model an 'Ashtray' and discuss 'Shell' command in details.
Ashtray 23:40
In this video, we continue modeling our 'Ashtray' and discuss 'Move/Copy' command along the way.
Tea Cup 16:57
In this video, we are going to model a Tea Cup and discuss 'Spline, Revolve and Tube' commands.
Tea Cup 23:32
In this video, we are going to model our 'Tea Cup' with another approach and discuss 'Sweep Along a Guide' command.
Tea Cup 33:49
In this video, we are going to model our 'Tea Cup' with a third, hybrid approach.
Toy 10:43
In this video, we are going to model a 'Lego' Style toy and discuss 'Pattern and Mirror' commands in detail.
Toy 23:18
Toy 33:37
Toy 43:13
In this video, we are going to model a 'Lego' Style toy and discuss 'Pattern and Mirror' commands in detail.
Toy 53:28
In this video, we are going to model a 'Lego' Style toy and discuss 'Pattern and Mirror' commands in detail.
Barbeque 12:29
To consolidate what we have learned so far, we are going to model a 'Barbeque' and use different commands for each step along the way.
Barbeque 22:31
To consolidate what we have learned so far, we are going to model a 'Barbeque' and use different commands for each step along the way.
Barbeque 35:08
To consolidate what we have learned so far, we are going to model a 'Barbeque' and use different commands for each step along the way.
Barbeque 42:08
To consolidate what we have learned so far, we are going to model a 'Barbeque' and use different commands for each step along the way.
Barbeque 52:36
To consolidate what we have learned so far, we are going to model a 'Barbeque' and use different commands for each step along the way.
Barbeque 63:54
To consolidate what we have learned so far, we are going to model a 'Barbeque' and use different commands for each step along the way.

Datums 13:00
In this video, we are discussing 'Datums' in detail.
Datums 22:57
In this video, we are continueing 'Datums'.
Datums 32:57
Section Views3:01
Layers3:07
Synchronous Modeling5:43
A quick in-detail quide to frequently used Synchronous Modeling commands.
Sketch Constraints5:38
New Sketch Solver4:13
A quick look at the new sketch solver introduced with the version 1953
Measure5:54
In this video, we discusss the new 'Measure' command in detail.

How To Import Parts3:58
In this video, we are going to learn how to import parts with different file formats.
How To Add Components to an Assembly3:53
In this video, we are going to learn 'How to Add Components to an Assembly'
Navigation In Assembly Module 13:21
In this video, we are going to learn 'Navigating in Assembly' module and discuss 'resource Bar' in detail.
Navigation In Assembly Module 23:19
In this video, we are going to contniue 'Navigating in Assembly' module.
How To Handle Iges Files1:15
A quick tips and tricks video for *.iges formatted files.
Assembly Constraints 14:06
In this video, we are going to learn 'Assembly Constraints' to place components in their positions.
Assembly Constraints 22:18
In this video, we are going to continue placing our components using 'Assembly Constraints'
Assembly Constraints 31:23
In this video, we are going to continue placing our components using 'Assembly Constraints'
Assembly Constraints 42:54
Wave Geometry Command3:48
In this video, we are going to discuss to 'Wave Geometry' command in detail.
Preparation To Mirror1:45
In this video, we are going to prepare our base before mirroring our components.
How To Mirror In Assembly Module4:19
In this video, we are going to discuss 'Mirroring' in detail.
How To Pattern In Assembly Module0:33
A quick video about 'Patterning' the components.
Exploded Views4:19
In this video, we are going to learn 'Exploding Our Models'.
Homework0:21
A quick homework to practice what we have learned.

Introduction To Drafting 12:56
In this video, we are going to make an introduction to 'Drafting' Module
Introduction To Drafting 22:27
In this video, we are going to make an introduction to 'Drafting' Module.
Adding Views1:38
In this video, we are going to learn adding 'Views' to our 'Sheets'
Assembly Preparation For Drafting6:30
In this video, we are going to import a part file and convert it to 'Assembly' to be able to draft each component.
Drafting Under Assembly4:01
In this video, we are going to learn how to prepare technical drawings for 'Assembly' files.
Section Views1:56
Section Views2:56
In this video, we are going to learn 'Section Views' command and discuss 'Hidden Lines' along the way.
Section & Detail Views4:04
In thls video, we discuss Section and Detail Views in detail.
Center Lines4:43
In this video, we are going to learn adding 'Center Lines' to our views.
Break-Out Section Views3:08
In this video, we are going to discuss 'Break-Out Section Views'.
Summary5:06
A short video to consolidate what we have learned so far.
Dimensioning and Annotation3:31
Dimensioning4:32
Bill of Materials 13:08
Bill of Materials 22:37
Homework0:47
A quick homework to practice what we have learned.

Resource Bar0:27
In this video, you can find a setting about the location of 'Resource Bar'.
Line Widths0:23
In this video, you can find a setting about how thich the lines are rendered.
Undo Size0:48
In this video, you can find a setting that enables you do more 'Undo' steps.
View Animation0:56
Zoom Direction1:01
In this video, you will find the setting for zoom direction for your mouse scroll.
Selection Methods0:35
In this video, you can find a setting for different 'Selection Method' options.

Requirements

None
Old versions of NX will also be applicaable to a point since the interface does not change much

Description

This course is designed for primarily for beginners.

Professionals want to catchup with the latest version of the software can benefit fast and easy.

All videos are in ''Follow Along' style with lots of Engaging Animations to convey the information effectively.

Once you have completed this computer based training course, you will be fully capable of using these tools and techniques to create your own complex 3D parts, assemblies and technical drawings.

Why to choose this course?

All the lessons and geometries are designed to keep your focus on the software, not on the geometries.
All lectures are straight to the point.
There is NO 'Difficulty'. We made sure that everything is easy to learn.
We not only learn how to use Siemens NX ,but also learn different approaches for similar design scenarios.
Advantages and disadvantages of them different commands
Key differences in similar functioning commands
Tons of engaging animations to convey information.
Tons of Exercise Files
Learn by working, not by memorizing!
Instructor support

Who this course is for:

First Timers who who want to learn Siemens NX absolutely from scratch.
Any Graduate student or Diploma Students.
Professionals who want to add their Siemens NX skills to their resume.
Professionals to catch up with the latest version of the software

What you get :

4 hours of HD video tutorials with continuous update. The series are constantly updated!
Over 80 carefully curated videos for straight to the point, effective delivery.
Tens of Supplementary Files/Homework
Full lifetime access
Access on mobile and TV
Modules Covered in this course:
Modeling
Assembly
Drafting
In-Depth Videos for key topics like Datums, Constraints Layers , New Sketcher Solver and Synchronous modeling and more
Synchronous Modeling
Animation Designer Module
Key Useful Settings

Who this course is for:

University Students,
Fresh Mechanical Engineers and
First Timer Professionals
And professionals who are trying to get familiar with the newer versions

Siemens NX Encyclopedia

What you'll learn

Explore related topics

Course content

Introduction7 lectures • 13min

Modeling25 lectures • 1hr 29min

In-Depth Videos9 lectures • 37min

Assembly15 lectures • 42min

Drafting16 lectures • 54min

Animation Designer Module4 lectures • 18min

Useful Settings6 lectures • 4min

Surface Modeling3 lectures • 9min

Requirements

Description

Who this course is for: