Siemens NX CAM & Post & Mold + NX 2027 CAM Interface (عربي)

Name: Siemens NX CAM & Post & Mold + NX 2027 CAM Interface (عربي)
Rating: 4.8 (32 reviews)

Learn NX Manufacturing (CAM) & Injection Mold (NX Mold Basics) & Sheet Metal (التصنيع واسطمبات الصاج و حقن البلاستيك)

Highest Rated

Created byMohamed Gamal

Last updated 11/2022

Arabic

What you'll learn

ستكون محترف الكام بعد هذا الكورس
هتتعلم عمليات التفريز والخراطه الثلاث محاور والاكثر من ثلاث محاور
هتتعلم كيفيه عمل عمليات التفريز والخراطه والثقوب من اول خطوه حتى استخراج الاكواد
هتتعلم كيفيه التحكم فى حركات القطع وتحديد نقط بدايه القطع والتحكم فى مسارات القطع
You will learn how to use NX post builder to customize the G code
You will learn the most common operations of NX CAM.
You will learn the most common cutting and non cutting options in NX CAM
هتتعلم عمليات التصنيع الشائعه في اقل وقت ممكن
You will learn how to use NX CAM for Milling, Turning, Drilling and Wire EDM Operations
You will learn how to Use NX CAM for 3 Axis and Multi Axis Operations
ستكون قادر على العمل في المصانع التي تستخدم ماكينات التفريز تحكم رقمي
ستتعلم خطوات حقن البلاستيك
After this course, you will be able to make injection Mold using NX

Course content

15 sections • 78 lectures • 7h 51m total length

Course Introduction3:18
Introduction to the concept of CNC G-Code (Prerequisites for NX CAM)22:58
NX CAM & Post Builder Overview5:41
In this Session, you will have a full vision for the course contents, also some definitions that we will use during the course, please note that this course is more practical course, we will focus only in the most common operations that we are using in our work, we will focus only in the most common parameters that you must need in your work, all course will be in 3hrs which give you the advantage to learn NX CAM quickly and to start to implement this in your work, also you will have all kind of technical support from the instructor after the course

CAM General Steps (3 Axis Roughing Operation)11:40
Establish the program, tool, method, and geometry parent groups to define parameters for reuse.
Create operations to define the tool paths.
Generate and verify the tool paths.
Post process the tool paths to format the data for your machine tools and controllers.
Create shop documentation.
CAM General Steps (3 Axis Finishing Operation)8:41
Establish the program, tool, method, and geometry parent groups to define parameters for reuse.
Create operations to define the tool paths.
Generate and verify the tool paths.
Post process the tool paths to format the data for your machine tools and controllers.
Create shop documentation.
3 Axis Rough Operations (Plunge Milling)5:20
Plunge Milling is a unique milling operation that is best used in deep areas that require a long tool. Successive plunge motions take advantage of the increased rigidity when a tool moves along the Z-axis to efficiently rough out large volumes of blank material. The reduced radial force makes it possible to use long slender tools and maintain a high rate of material removal. Plunge Milling is attractive for finishing hard-to-reach deep walls using long slender tool assemblies.
Using Plunge Milling to rough contoured shapes usually leaves large scallops and steps. Use an In Process Workpiece in subsequent operations to get a more consistent remaining stock.
The distinctive characteristics of Plunge Milling are:
It roughs out material.
It cuts down the tool axis.
When there are multiple regions, Plunge Milling starts at the deepest plunge depth. Each successive region then ignores the previous region.
3Axis Planar operation and Planar with IBW4:08
3Axis Planar Milling operations & Planar Profile3:03
3Axis Face Milling operation and Face Milling Manual3:39
3Axis Finish Operations (Z Level Profile)3:56
Use Z-Level Milling for fixed-axis semi-finishing and finishing. Z-Level Milling removes material in planar levels that are perpendicular to a fixed tool axis. Cutting is completed at a constant Z level before moving on to the next Z level.
3Axis Finish Operations (Other operations)7:08
Use Z-Level Milling for fixed-axis semi-finishing and finishing. Z-Level Milling removes material in planar levels that are perpendicular to a fixed tool axis. Cutting is completed at a constant Z level before moving on to the next Z level.
3Axis Rough & Finish Corner Operations5:49

Multi Axis Finish Operations (Streamline Operation)10:18
You will learn how to do Multi axis milling operation and control the tool axis to be normal to the surface in each point
Multi Axis Finish Operations (Tool Axis Control)5:01
You will learn how to control the tool axis for the Multi axis operations
Multi Axis Finish Operations (4 axis Tool Axis Control)4:58
You will learn how to control the tool axis for the Multi axis operations
Multi Axis Finish Operations (Z Level 5 Axis Operation)3:17
You will learn how to do Multi axis milling operation.
Multi Axis Machine Simulation3:56
You will learn how to do Multi axis milling operation, also and to do simulation for the CNC machine (Multi Axis)

Drilling Operations5:26
You will learn how to do drilling operations (Spot Drilling, Drilling,...)
Wire EDM Operation3:34
Wire Electric Discharge Machining (WEDM) is an electro thermal process in which a single strand of wire is used in conjunction with de-ionized water to conduct electricity, allowing the wire to cut through or about the workpiece. This process makes it possible to use Wire EDM to machine complex parts. The wire is usually made of brass, copper, or tungsten.
you will learn how to do wire edm operation with NX CAM

Cutting Parameters & Non-Cutting Moves part 1-28:18
You will learn how to control the cutting parameters and non cutting moves, to define the home point and start point, to make smooth corners for the tool path and other important options.
Cutting Parameters & Non-Cutting Moves part 2-24:53
You will learn how to control the cutting parameters and non cutting moves, to define the home point and start point, to make smooth corners for the tool path and other important options.

Requirements

تصميم كاد
لا يوجد احتياج لاى خبره مسبقه فى برنامج التصنيع NX CAM
يحتاج خبره بمبدا حقن البلاستيك
خبره بمبادى رسم الكاد.

Description

Course Main Contents (4 Courses!):

Course 1: NX CAM (Milling - Turning - Wire EDM) + G Code & CNC Overview + NX 2027 CAM Interface
Course 2: NX Post Builder
Course 3: NX Sheet Metal
Course 4: NX Mold Wizard

Reviews Sample:

شكراً ليك ياهندسة إنت بجد بروفيشينال أتمنى من حضرتك إنك ترفع سوليد كام شرح بالعربي
جزاك الله خيرا .. طريقه شرح ممتازه .. إعطاء المعلومه مباشره وبطريقه مبسطه. بدون اطاله في الوقت
Amazing very nice

Description (الوصف)

المحاضره الاولى مقدمه عن ال G code concept
يعتبر هذا الكورس ملخص للعمليات المهمه الشائعه في التصنيع
هتتعلم عمليات التصنيع في اقل وقت ممكن وأقل تكلفه
يتم تحميل كل الاجزاء التي ذكرت أثناء الكورس
فكره هذا الكورس هي تعلم عمليات التصنيع وكيفيه بناء اكواد الماكينات
بعد الكورس ستكون قادر علي استخدام الكام لعمليات التفريز والخراطه الثلاث محاور والاكثر من ثلاث محاور
فكره الكورس انك ستعلم الكام وبناء الاكواد فى اقل وقت واقل تكلفه عن طريق تعلم ملخص الخبره العمليه والعمليات المهمه الشائعه
ستكون قادرا على العمل في المصانع التي تستخدم ماكينات التفريز والخراطه تحكم رقمي
ستتعلم خطوات حقن البلاستيك وعمل الاسطمبات

This Course covers conclusion of the most common operations that you will use during your actual work, the idea of this course to provide small course with low price contains the most important operations and options.
The idea of this course comparing to other courses are, The low price, low no of hrs., after course technical support.
This Course is a summary of actual experience in CAD CAM field, the course has been designed to allow you to use the NX CAM & Post builder after only 4 hrs.!
This course has been designed as practical course to focus on the common operations and the common options that you will use for work.
NX CAM & Post Builder Course introduce the most common Milling, Turning and Wire EDM Operations ( 3 Axis & Multi Axis), the course will be step by step to make the full operations from beginning to generate the G code, also to customize the G code to be readable with any CNC machine type or any number of axis.
After this course, you will be able to use the NX CAM & Post Builder to do machining for any Part and to use NX CAM with any CNC Machines.
After this course, you will be able to create G code for Milling, Turning and Wire EDM operations (3 Axis & Multi Axis).
After this course, you will be able to make injection Mold using NX

Notes:

المحاضره الاولى تناقش مقدمه عن اكواد ماكينه ال CNC
You will download all parts that we used during the course.
The implementation of this course is in NX 11 but you will be able to implement using any version.
You will be able to use NX CAM after first Lecture

Who this course is for:

مهندس او فني انتاج
مهندسين كاد كام
مهندسين وفني ورش التفريز والخراطه
طلاب ميكانيكا
Manufacturing Engineers

Siemens NX CAM & Post & Mold + NX 2027 CAM Interface (عربي)

What you'll learn

Explore related topics

Course content

Introduction3 lectures • 32min

Milling 3 Axis Operations (Roughing & Finishing)9 lectures • 53min

Milling Multi Axis Operations & Machine Simulation5 lectures • 28min

Drilling & Wire EDM Operations2 lectures • 9min

Cutting Parameters & Non-Cutting Moves2 lectures • 13min

Blank & Tool Creation and Cut levels option2 lectures • 7min

Turning Operations Basics1 lecture • 12min

Post Builder Basics3 lectures • 26min

NX CAM Projects5 lectures • 38min

NX 2027 CAM Interface (Roughing & Finishing Operation)1 lecture • 9min

Requirements

Description

Who this course is for: