Revit Structure from Scratch

Learn to draw levels from level 1 through level 10, copy levels, offset elevations, and switch between structural, floor, ceiling, and view plans in Revit.

Master level editing in revit by changing level elevations, locking and unlocking levels, extending levels across all levels, and using bubbles and alignment tools to propagate adjustments.

Learn to create and edit grids in Revit from scratch, including placing, naming, copying, offsetting, and using circles, arcs, and multi segment lines across elevations and levels.

Place vertical concrete rectangular columns by selecting a column family and type on plan view, rotate to align with grids, then adjust base/top levels, height, and offsets.

Create and modify a slanted column in Revit by setting base and top offsets between levels, applying a 45-degree rotation, and adding base and top cuts.

Learn to add structural columns by selecting grid intersections, choosing type C 270 25, rotating and switching column placement, and using create similar to duplicate column types across the plan.

Create walls in Revit from scratch by drawing on the center line and setting finish faces. Adjust placement with offsets, radius, and join types across base and top levels.

Master selection techniques in Revit using left to right rectangle selection, control to add, shift to remove, and filters to target walls and columns, with level-based property edits.

Explore detail levels in Revit structure, compare coarse, medium, and fine details, and learn to change state level properties to switch between them, managing layers, walls, and columns.

Discover visual styles in Revit, switching between wireframe, lines, and shaded views. Rotate with the mouse wheel and keyboard, and tweak graphic display properties for consistent colors and realism.

Learn how to use hide and isolate commands in Revit to temporarily hide categories, isolate elements, and reveal or reset views for focused column work.

Learn how to navigate Revit structure from scratch with practical zoom techniques, including region zoom, fit to sheet, mouse wheel zoom, and pan controls for efficient views.

Becoming proficient in revit structure from scratch, this lecture demonstrates drawing and placing concrete rectangular beams, selecting beam types, adjusting level placements, offsets, and cross-section orientation.

Create a floor in revit from scratch by drawing with line, rectangle, polygon, or circle, set a 300 mm thickness, and adjust level offsets and boundary.

learn to create a slope arrow in Revit by drawing between story levels, selecting source and destination stories, adjusting offsets, and applying slope values from eight to twenty degrees.

Learn to draw a floor structure, set elevations for points and lines, and modify subsystems and elements to build a Revit structure from scratch.

Learn how to align columns to grids and walls by creating alignment marks, moving elements to grid intersections, and locking faces to preserve alignment constraints across multiple elements.

Use the offset tool in Revit structure, selecting graphical or numerical options to create and copy offsets with a length such as 1500, up or down across z levels.

Explore how to define mirror axes by specifying two points with the draw axes or pick axes tools, enabling you to mirror selected elements in the Revit model.

Select an element and apply split, choosing between two types by defining two points to create a gap, then adjust lengths and delete split segments as needed.

Learn to create arrays in Revit structure, group and associate elements, and set the center of rotation and angle to control distance, numbers, and plan views across levels.

Pin elements to lock their position, select multiple elements, and draw a column structure aligned to a grid for precise placement in Revit.

Learn to trim and extend walls and beams in Revit, using select to extend single elements or multiple elements.

Learn to use the rotate tool in Revit structure from scratch, set the center of rotation, and apply angles like 65, 107, 50, and 55 degrees to columns and shapes.

Learn how to copy and move wall structures and joints, move joints along vertical and horizontal directions, and create multiple copies using keyboard control.

Learn to use the measure tool in Revit to measure between points, along elements, and capture lengths and angles for walls and beams.

Learn to create and edit structural openings in revit using opening by face, opening by area, and opening by phase. Delete, finish, and apply openings to floors, beams, and columns.

Learn to create and edit a shaft opening in Revit, adjust base and top offsets across levels, and align and refine sketches with symbolic lines.

Learn how to create and modify wall openings in Revit structure, edit wall profiles, set opening zones, and draw rectangular openings to fit the wall.

Create vertical openings in structural floors using the vertical opening tool, align them with elevations and phases, and view the result in plan and elevation.

Model a building quickly by creating levels and grids, then place concrete columns, beams, and a flat slab, copying and aligning across levels.

Attach walls to a floor and detach them in Revit structure from scratch, adjust top offsets and lengths, and apply changes to walls, columns, and floors.

Learn to create isolated footings in Revit from scratch by placing footings at grid intersections, adjusting elevations and offsets, rotating at 45 and 90 degrees, and linking to columns.

Explore strip footing foundations in revit structure from scratch, adjusting eccentricity, extension lengths, and choosing bearing or retaining footing for walls.

Draw raft foundations in Revit by creating boundary shapes, applying 160 millimeter level 1 foundations, offsetting slabs, and assembling a compound footing for two columns.