Revit MEP - Mechanical / HVAC systems
What you'll learn
- Create templates with settings suitable for mechanical design
- Carry out energy analysis based on building data
- Create thermal load reports
- Export to external simulation software using gbXML
- Create mechanical systems within Revit
- Create piping system for mechanical installations
- Design duct and pipe sizes from BIM model
Requirements
- It is advantageous to be familiar with the Revit environment
- It is necessary to have Revit 2020 or higher to open the exercise files
Description
In this course we will concentrate on the use of Revit tools that assist us in performing energy analysis of buildings. We will see how to enter energy information in our model and how to export this information for treatment outside of Revit.
#AulaGEO
In the final section, we will pay attention to creating logical duct and pipe systems, creating those elements, and using the Revit engine to design sizes and verify performance.
content:
Lecture 1: Introduction
Lecture 2: Templates with mechanical configurations
Lecture 3: Links for collaborative work
Lecture 4: Create spaces
Lecture 5: Place spaces
Lecture 6: Create space tables
Lecture 7: Modify space properties
Lecture 8: Create zones
Lecture 9: Modify construction options
Lecture 10: Thermal load analysis
Lecture 11: Load analysis
Lecture 12: Climate data
Lecture 13: Sliver spaces
Lecture 14: Level of detail of the report
Lecture 15: Load analysis details
Lecture 16: Thermal load reports
Lecture 17: Export gbXML to simulation software
Lecture 18: Systems Explorer
Lecture 19: Mechanical configurations
Lecture 20: Duct connectors
Lecture 21: Create mechanical systems
Lecture 22: Mechanical piping configuration
Lecture 23: Pipe connectors
Lecture 24: Piping systems
Lecture 25: Place terminals
Lecture 26: Place mechanical equipment
Lecture 27: Create routing scheme
Lecture 28: Manual routing
Lecture 29: Duct sizes
Lecture 30: Mechanical piping equipment
Lecture 31: Mechanical pipe routing
Lecture 32: Manual pipe editing
Lecture 33: Mechanical pipe size
Lecture 34: Loss reports
Lecture 35: Farewell
Who this course is for:
- BIM managers
- BIM modelers
- HVAC Modeler
- REVIT/BIM Mechanical Modeler
- HVAC Draftsman
Instructors
- 4.0 Instructor Rating
- 2,484 Reviews
- 23,593 Students
- 132 Courses
We choose the best courses and make them available to new audiences.
Our training offer covers the entire spectrum of data intelligence:
Art - Capture - Modeling - Design - Construction - Operation. Using technological development and process improvement as a transverse thread.
The creators of courses with which we have decided to work have been carefully selected, to offer a complementary set of knowledge. We firmly believe that today people do not seek courses to fill their walls with diplomas; but to make their abilities more productive.
Copyright:
All the content of the AulaGEO Academy it´s owned and managed by Golgi Alvarez. If you have any question, you can cotact to info@zatoca.com
- 4.1 Instructor Rating
- 4,293 Reviews
- 20,512 Students
- 36 Courses
Soy un entusiasta de la tecnología y me he dedicado a la enseñanza de las materias que me apasionan. Con más de 15 años de experiencia en diseño asistido por computador y un sólido conocimiento acerca del Modelado de Información de Edificaciones he compilado mucha de la experiencia adquirida a través de los años en cursos de capacitación útiles, fáciles de entender y prácticos para el día a día del diseñador.
Mis campos de acción incluyen CAD (Computer Aided Design), CAE (Computer Aided Engineering), FEA (Finite Element Analysis), BIM (Building Information Modeling), PM (Project Management). Y aunque me inicié con el estudio de la ingeniería civil, he explorado otras ramas de la ingeniería, participando en proyectos que incluyen la creación de modelos computaciones para la simulación de maquinaria para la extracción de petróleo, análisis no-lineal de cimentaciones especiales, diseño de piezas automotrices, estudio de estabilidad en túneles, entre otros tipo de proyectos.
Así mismo, he creado aplicaciones de software dirigido a la administración de procesos y al diseño asistido por computador. También soy programador web, especializándome en aplicaciones web .NET. Tengo experiencia programando en C#, Java, Python, C++, Foltran, JavaScript. Y en lenguajes de etiquetado como HTML5 y CCS3.
Como hobby he incursionado en la programación de autómatas programables (PLC) y en la programación en Assembler de micro-controladores.
En resumen, me encanta a prender y enseñar. Ese es realmente mi trabajo.