Revit 2022-26: Complete Steel Structure "Warehouse" Modeling

Name: Revit 2022-26: Complete Steel Structure "Warehouse" Modeling
Rating: 4.6 (106 reviews)

Simple and professional Revit course to master modeling of steel structure warehouse using standard sections.

Created byRAKON GR.

Last updated 7/2025

English

English [Auto],

What you'll learn

Complete modeling of all steel structure warehouse members
Create and modify steel connections between all members
Steel Fabrication Elements ( plate, bolts, welds )
Steel Modifiers ( shorten, contour cut )
Insert standard sections for columns and beams from Revit library

Course content

2 sections • 30 lectures • 4h 45m total length

1- Start New Project & Units2:33
Open a new Revit project from models and templates, select structure notices, and then verify and set project units to mm before drawing, finally saving the model.
2- Levels & Grids8:01
Create and modify levels and grids in Revit 2022, including renaming levels, setting a 10,000 unit height, and adding grids with x and y spacings across elevations.

3- Portal Frame (Columns & Beams)8:18
4- Horizontal Bracing6:50
5- Vertical & Longitudinal Bracing7:04
Add vertical bracing to the warehouse model using a single equal angle and double angle back to back, placed at columns with a structure brace and bolted connections.
6- End Gable Columns7:31
Add end gable columns in Revit 2022 warehouse modeling by placing, spacing (2000/4000 mm), aligning to the flange, mirroring, and adjusting vertical dimensions to 4000 mm.
7- Isolated Foundations2:06
Add isolated foundations to columns in Revit 2022 by applying 1200×1200×800 foundations from floor level, per column or via multi-select using Ctrl for multiple columns, with an 800×800×800 alternative.
8- Purlins9:50
Add purlin loads in Revit 2022 by inserting the load family, setting beam direction, spacing 1200 mm across three bars, and copying/mirroring to the other bays.
9- Side Girts5:25
Model steel warehouse side girts in Revit by creating a rectangular frame, setting 1,400 mm spacing, and aligning to floor level, then mirror and rotate to finalize the layout.
10- End Girts8:29
Add anchors and align planes in the Revit 2022 warehouse steel model, adjust views, rotate elements, and seal boundaries while filtering and finalizing bonds across three parts.
11- Knee of Frame Connection21:50
Explore knee of frame connections in Revit 2022 for warehouse steel-structure modeling, including adding and editing column-to-beam connections with bolts, plates, and bracing.
12- Apex Connection6:49
Learn to model the apex connection in Revit 2022 steel warehouse with blade dimensions 700 mm by 200 mm, 20 mm thick, eight 24 mm bolts and projection rules.
13- Base Plate Connection9:29
Create the base plate connection between the column and foundation in Revit 2022, configuring plate thickness, anchor bolts, and mushroom plates, then propagate the solution across sections.
14- Purlins Connection (Part 1)5:47
Create purlins connections by fixing the short-term balance issue, align and center joined elements within the work frame, and justify to the center to ensure correct 3D boundaries.
14- Purlins Connection (Part 2)11:20
Learn to model purlin connections in Revit 2022 for a warehouse steel frame, duplicating and adjusting equal-angle connections, bolts, and dimensions, then extend and trim in 3D to align frames.
14- Purlins Connection (Part 3)8:45
Explore purlins connection setup in Revit 2022, including double beam splice, bolted options, bolt entry distances, and plate thickness. Visualize in 3d view and configure flying bracing or staged bracing.
14- Purlins Connection (Part 4)4:30
Explore purlin connections in a warehouse steel frame by selecting the end brace for the gable frame and configuring its single connection in a step-by-step Revit 2022 workflow.
15- Horizontal Bracing Connection (Part 1)17:54
Add and customize horizontal bracing connections in a Revit 2022 warehouse model, detailing bolts, borders, spacing, and three connection types for accurate integration.
15- Horizontal Bracing Connection (Part 2)6:41
Create a horizontal bracing connection in Revit by setting bolt positions, diameters, and edge distances, adjusting spacing for one or two lines, and copying the connection to other bays.
15- Horizontal Bracing Connection (Part 3)17:33
Create and customize horizontal bracing connections in Revit 2022, adjust plate and bolt specifications, mirror and modify intersections, and ensure proper placement and visibility.
16- Vertical & Longitudinal Bracing Connection (Part 1)23:47
Learn how to add vertical and longitudinal bracing connections in Revit 2022 for warehouse steel structure modeling, including selecting members, cutting and shortening lines, and detailing bolts.
16- Vertical & Longitudinal Bracing Connection (Part 2)9:42
Master vertical and longitudinal bracing connections for a warehouse steel structure in Revit 2022, including how to place and verify connections for correct alignment.
16- Vertical & Longitudinal Bracing Connection (Part 3)16:08
Copy vertical and longitudinal bracing connections to the opposite side, adjust spacing and start attachments, and ensure bracing blades do not intersect stiffness, using welds as needed.
17- Side Girts Connection (Part 1)6:01
Fix side girts connections by adjusting boundary definitions to prevent intersections with columns, copy or move elements from boundary to boundary, align joints at column ends.
17- Side Girts Connection (Part 2)17:36
Add the side girts connection for the corner column using a single connection, copy and customize conditions, and apply it across similar joints to complete the warehouse steel framing.
18- End Girts Connection (Part 1)4:40
Fix end girts connections by correcting edge boundaries, realigning shortened members, and extending them to the end, using Revit 2022 warehouse modeling.
18- End Girts Connection (Part 2)9:33
Master end girts connection details in Revit 2022 warehouse modeling, including distances, column values, and boundary.
19- End Gable Column Connection8:34
In Revit 2022, learn to create end gable column connections in a steel warehouse model, adjusting bolts, rollers, spacing, and duplication of conditions for a consistent connection.
20- Eave Purlin Connection7:51
Explore creating a customized eave purlin connection in Revit 2022, adjust 10 mm spacing, and trim and extend surfaces within a 3D warehouse model.
21- Door Header Connection4:51
Make the door header connection to the column in the warehouse model by selecting the beam and column, then adjust bolt spacing and stagger bolts.

Requirements

Autodesk Revit Software
All Revit users can easily understand and follow the course
Application with videos step by step

Description

Hello, welcome to

Revit 2022-2026: Complete Steel Structure "Warehouse" Modeling

In this course, we will start modeling from start to finish without skipping a single step.

First, we will finish modeling the members of the steel structure warehouse using standard sections from Revit library, then we will add connections to all joints between the members using the downloaded Revit connections and we will customize or create our new connections.

The steel structure warehouse project will be divided into three courses, this course is for the modeling part, and it will cover all aspects of steel structure warehouse modeling in Revit, where we will explain in detail how to create a project from start to finish, including creating and modifying connections.

To get the most out of the course, it is preferable to open Revit and start applying step by step with videos.

Finally, at the end of the course, you will be able to create a complete Revit model for any steel structure warehouse or similar projects.

What you will learn in this course?

Starting new project
Editing project units
Modifying and creating levels
Modifying and creating grids
Inserting standard columns and beams section from Revit library
Creating portal frame
Creating horizontal bracing
Creating vertical and longitudinal bracing
Creating end gable columns
Creating isolated foundations
Creating purlins
Creating side girts
Creating end girts
Creating and modifying knee of frame connection
Creating and modifying apex connection
Creating and modifying purlins connection
Creating and modifying base plate connection
Creating and modifying horizontal bracing connection
Creating and modifying vertical and longitudinal connection
Creating and modifying side girts connection
Creating and modifying end girts connection
Creating and modifying end gable column connection
Creating and modifying eave purlin connection
Creating and modifying door header connection
Steel Connection ( duplicate type, modify parameters, customize, break )
Steel Fabrication Elements ( plate, bolts, welds )
Steel Modifiers ( shorten, contour cut )
Work Plane ( set work plane, show work plane, reference work plane )
And more...

Who this course is for:

Structural engineers and it will also be useful for architects

Revit 2022-26: Complete Steel Structure "Warehouse" Modeling

What you'll learn

Explore related topics

Course content

Start2 lectures • 11min

Modeling28 lectures • 4hr 35min

Requirements

Description

Who this course is for: