programming Siemens S7-1200 PLC & KTP 400 HMI device

Learn how to use the Siemens S7-1200 PLC in total integrated automation with TIA Portal, create a simple project, configure hardware, and download or test programs online.

Learn ladder language rules in the Siemens S7-1200 TIA Portal simulator, define a project, configure devices, and implement branch-based ladder logic to drive a lamp and a three-phase motor.

Explore branches, networks, rungs, and crossings in ladder programming for Siemens S7-1200, learning parallel and series logic and how to simulate and test with a virtual PLC.

Learn how to apply Siemens S7-1200 ladder logic bit instructions: out coil, no, nc, and not, using normally open/closed contacts, push buttons, addresses, and xor testing.

Explore Siemens S7-1200 bit logic instructions: not, and, or, nand, nor, and xor in ladder and function block languages, with hands-on testing and PLC transfer.

Explore negative assignment, set and reset instructions in ladder logic for Siemens S7-1200 PLC, showing how the CPU evaluates inputs, updates outputs, and latches with green and red indicators.

Learn to implement set, reset, set bit field, and reset bit field instructions and SR/RS flip-flops in Siemens S7-1200 TIA Portal to control motors and lamps, including emergency conditions.

Master scan operands for positive and negative signal edges to generate pulses and drive outputs, using I0.0 and I0.1 to turn a motor on at 0→1 and off at 1→0.

Explore bit logic operations and test plc programs with force and sim tables in Factory IO, understanding the CPU scan cycle, image input memory, and PC-based simulation.

Link Factory IO to a Siemens S7-1200 PLC and test a simple program that controls a belt conveyor, using IP addressing, input offsets, and live simulation.

Apply logic operations to sort boxes by height using sensors, conveyors, and a pusher in a Siemens S7-1200 PLC project with Factory IO.

Transfer and test a Siemens S7-1200 PLC project with Factory IO, configure IP and CPU, and validate with physical inputs and the Factory IO simulator.

Learn to configure Siemens S7-1200 generate pulse timers (TP) in the TIA Portal, set 32-bit presets, use data blocks, and implement a two-lamp blink cycle with start/stop logic.

Learn how on delay and off delay timers work in ladder logic, with a 5-second preset to drive alarm, light, and motor in a line production project.

Master on delay and off delay timers in tia portal using ton and tof, with md4 memory, to drive a four-output production line in ladder and speed languages.

Explore the retentive on delay timer in Siemens TIA Portal, a time accumulator (t0nr) that stores elapsed time with a reset input and supports preset time changes.

Explore timer operations using retentive on-delay timers and timer parameters to control fill and discharge valves in a PLC-driven plant, switching between manual and automatic modes.

Master CTU and CTD counters in Siemens TIA Portal, detailing preset and current values, reset and load behavior, with practical data block tests.

Learn how CTU, CTD, and CTUD counters work in Siemens S7-1200 PLCs, including inputs, outputs, and count up/down logic with preset values in practical projects.

Explore comparator operations at Siemens S7-1200 plc, including equal, not equal, greater, less, and in range or out of range checks; build a traffic light program with counter and timer.

Learn to define and use math functions in TIA software for Siemens S7-1200, review data types and formats, and apply operations like add, subtract, multiply, and limit.

Learn math functions in Siemens S7-1200 programming, including square, square root, natural logarithm, exponential, and trigonometric functions, plus using cross reference table and defining reusable functions for x and y.

Learn move value, move block, fill, and swap instructions in Siemens S7-1200 PLC programming, and apply them to a data block project that updates ten motor speeds every 5 seconds.

Explore practical move instructions in a Siemens S7-1200 PLC project, including analog move, move block, and swap, to control tank fill and discharge using a level sensor and display.

Learn conversion operations in the Siemens S7-1200 PLC course, including data type handling, hex and binary representations, rounding, scaling, and function blocks with data blocks.