Learn Siemens TIA Portal, S7-1200 PLC & WinCC HMI by Scratch

Explore programmable logic controllers and Siemens S7-1200 systems, including inputs, outputs, CPU, modules, programming languages, functional block diagrams, ladder logic, data blocks, industrial networks, and HMI concepts.

Learn PLC memory types, bits, bytes, and addressing essentials. Identify data types like boolean, byte, word, and real numbers, and their mapping to binary, decimal, octal, and hexadecimal.

Explore what's new in TIA Portal v17, including installation, simulation, cloud connectivity, security, HTML5 web-based visualization, View of Things, and standardized library concepts.

Install PLC SIM v17 within Siemens TIA Portal workflows to practice configuring S7-1200 PLC and WinCC HMI components.

Master installation and setup of tia portal v15 for automation projects, balancing busy online courses and lessons while building practical plc and hmi configurations.

Create and use PLC tags in TIA Portal by defining inputs and outputs with symbolic names, then map them to absolute addresses (bytes and bits) for an organized program structure.

Structure TIA Portal programs by organizing logic into networks, function blocks, and a main organization block, enabling modular, reusable PLC design across machines.

Create and test a TIA Portal program by simulating the PLC, loading and running the project, monitoring tags, and using time-based sequences to mimic sensor inputs.

Learn how to add I/O modules in a Siemens PLC project: attach analog and digital signal boards to a CPU, review topology, and configure module properties for simulation.

Archive a TIA Portal project to share programs and retrieve it with all files intact using project archives, open retrieve, and extraction for remote access.

Discover shortcuts and settings, access the help menu, and explore a complete book of instructions with languages, networks, projects, and ready-made examples.

Explore the S7-1200 PLC training kit and trainer board, featuring emergency stop pushbuttons, selector switches, 220 V power supply, 24 V DC outputs, modules, and digital and analog sensor interfacing.

Power up the S7-1200 PLC by connecting 220-volt power and 24 V DC, switch on the main, and observe the indicators blink until the green light stabilizes.

Explore the S7-1200 PLC status LEDs, interpreting run (green) and fault indicators (red and yellow), memory card and configuration errors, and how indicators map to I/O, Ethernet, and modules.

Connect your laptop to the S7-1200 PLC via ethernet, configure IP addressing on the same network, and use TIA Portal to take the device online and verify online diagnostics.

Download a program for the S7-1200 PLC by compiling it, selecting options, loading modules, and testing the logic offline.

Learn to upload a program from a S7-1200 PLC to a PC via online search and upload from device, including detecting devices and handling unsupported older CPUs.

Explore wiring of the S7-1200 PLC, covering sourcing and sinking inputs, 24-volt supply and ground wiring, output behavior, and optical isolation for safe external device interfacing.

Explore the diagnostic buffer to view startup events, alarms, and internal errors, then troubleshoot using device information, IP address, and project information in the S7-1200 PLC.

Explore bit logic instructions in Siemens TIA Portal with S7-1200 PLC and WinCC HMI, wiring inputs and outputs, using normally open/closed contacts, and parallel circuits with online simulation.

Learn set and reset instructions on a Siemens S7-1200 PLC by wiring normally open contacts, tags, and addresses to control a lamp via a push button.

Explore rising and falling edge instructions in Siemens TIA Portal for S7-1200 PLC. Learn how positive and negative edges trigger inputs and control outputs with memory and a push button.

Explore timer instructions ton, toff, and tonr, including on-delay and off-delay with retentive and non-retentive modes. Observe preset times, inputs, outputs, and elapsed time driving timing diagrams.

Explore CTU, CTD, and CTUD counter instructions in Siemens TIA Portal with S7-1200 PLC, using sensors, pushbuttons, memory addresses, and up/down counting for production lines.

Create and apply math instructions in tia portal to perform addition, subtraction, multiplication, and calculator-based formulas for production parameters and efficiency, with simulation and data-type handling.

Learn to use convert instructions to transform data types, such as integers to real and unsigned values, handle floating point rounding or truncation, and move data between addresses.

Learn how to use jump and label instructions in Siemens tia portal for s7-1200 plc, wiring momentary addresses like m10.0 and outputs like q0.0, to control alternate networks.