Udemy
    •  
    •  
    •  
    •  
    •  
    •  
    •  
    •  
Turn what you know into an opportunity and reach millions around the world.
Learn More
Your cart is empty.
Keep shopping
The Complete Course of EasyEDA and PCB Design
Rating: 4.1 out of 5(106 ratings)
498 students

The Complete Course of EasyEDA and PCB Design

Become an expert in PCB design and Electronics using EasyEDA software in a Professional way.
Created byThe Tech Courses
Last updated 1/2025
English
English [Auto],

What you'll learn

  • At the end of the course you will fully master EasyEDA, to be able to conduct out your own PCB designing projects, from scratch
  • You will become familiar with its interface, toolbars and basic commands, and you will master all the phases of the design, layout and configuration process
  • You will be able to design step by step PCB projects, understanding all the logic and ending with advanced practical examples
  • You will learn in a professional way the Designing Schematic and the Designing Schematic Components in EasyEDA from scratch
  • You will understand the fundamental concepts to be able to create and assign footprints to Shematic components, and creating PCB libraries in a professional way
  • You will learn the Placement and Routing in PCB Layout (also Routing using POLY method), and above all, understanding their interpretation
  • You will master all the BOM (Bill of Materials) and Gerber files generation and getting quotation of board from fabricator
  • You master the generation of Schematic component and Footprint of a Complex component
  • You will be able to practice the content learned in a practical way by following all the steps in the complete exercises and the 2 final projects
  • You will start with the basics and progressively carry out more complex steps until you reach an advanced level and absolute mastery at the end of the course

Course content

1 section • 15 lectures • 7h 15m total length

  • Introduction Guide of the Course22:01

    Design schematics from scratch and route PCB layouts in EasyEDA, compare through hole and SMD components, generate Gerber files and BOM, and read datasheets to create footprints.

  • Quiz
  • Getting started with EasyEDA and knowing the GUI and basic settings of EasyEDA25:12

    Navigate the EasyEDA GUI and basic settings, sign up, manage projects, and convert schematics to PCB while updating the layout and exploring libraries and LCSC parts.

  • Designing Schematic in EasyEDA from Scratch30:19

    Design a schematic from scratch in EasyEDA for the TPS6293 regulator, wiring biasing capacitors, resistors, inductors, and connectors from the Lcsc electronics library.

  • Designing Schematic Components in EasyEDA16:18

    Learn to draw an 8-pin schematic symbol in EasyEDA, assign pins per the TPS 6293 datasheet, and save the custom symbol to reuse in future projects.

  • Creating custom footprint and assigning it to schematic component16:35

    Create an eight-pad footprint from scratch in EasyEDA, align pads and silkscreen, save as a custom TPS 6293 footprint, and assign it to the schematic component.

  • Placing the components in PCB Layout as per Schematic diagram17:12

    Convert your EasyEDA schematic to a PCB layout, then place and align capacitors, resistors, and inductors for a compact, symmetrical design. View in 3D to optimize size and verify routing.

  • Routing of components in PCB Layout22:52

    Learn routing in EasyEDA PCB layout by using two-layer copper, managing top and bottom layers, and placing tracks, vias, and rat-nest guidelines while avoiding 90-degree bends and optimizing component placement.

  • Routing of components in PCB Layout using POLY method29:09

    Learn to route a pcb using the copper area (poly) in easyeda, creating connections with solid region, expanding to four layers, adding vias and ground connections, and rebuilding copper area.

  • Generating Bill of Materials and fabrication files (Gerber Files)18:46

    Generate the bill of materials and Gerber fabrication files for a PCB design, including part numbers, footprints, designators, and supplier details, using EasyEDA.

  • Getting quotation of board from PCB Fabricator11:33

    Learn how to obtain a pcb fabrication quotation by uploading gerber files and bill of materials, then configure base material, layers, quantity, and assembly options.

  • Generating Schematic component and Footprint of a Complex component22:44

    Learn to generate a complex component footprint in EasyEDA by translating datasheet dimensions into pads, spacing, and outline, then assign pins and save as a custom footprint.

  • Designing a complete EasyEDA project and practicing everything learned40:21

    Learn to design a complete EasyEDA project from scratch, drafting a TPS 6293 schematic, converting it to PCB layout, and generating Gerber files and bill of materials.

  • Schematic Designing of a complex Project in EasyEDA - Part 11:13:16

    Design a complex ATP 5014 schematic in EasyEDA by following the datasheet’s typical application circuit, wiring PVin, Vref, and four outputs with 0603 capacitors and 0402 resistors.

  • Schematic Designing of a complex Project in EasyEDA - Part 21:20:35

    Convert the schematic of the A5014 ic into a pcb layout in EasyEDA using datasheet’s recommended footprint, place four 10 microfarad capacitors and 0.8 microhenry inductors, and route four outputs.

  • Overview of all the parts and Course closure8:39

    Design schematics and PCB layouts in EasyEDA, an online tool saving projects in the cloud. Route with 45-degree traces, generate Gerber files, and order boards from JLCPCB.

Requirements

  • Having basic notions of any PCB design software can help, but the course starts from scratch
  • Login to EasyEDA (if you don't know how, don't worry, it's very easy and I'll explain it to you in the course!)
  • A decent computer and of course, desire to learn!

Description

Become a PCB designer professional and learn one of employer's most requested skills nowadays!

This comprehensive course is designed so that students, engineers, electronics operators, researchers... can learn EasyEDA software from scratch to conduct PCB designs and electronic projects in a practical and professional way. Never mind if you have no experience in electronics or PCB, you will be equally capable of understanding everything and you will finish the course with total mastery of the subject.

After several years working as an Engineer, I have realized that nowadays mastering EasyEDA for the electronic design and PCB is very necessary in engineering and other industrial applications. EasyEDA is the most popular cloud-based PCB software, and that is is why it is one of the leaders in the industry and its demand is increasing. Knowing how to use this software can give you many job opportunities and many economic benefits, especially in the world of engineeringand digital electronics.

The big problem has always been the complexity to perfectly understand the software it requires, since its absolute mastery is not easy. In this course I try to facilitate this entire learning and improvement process, so that you will be able to carry out and understand your own projects in a short time, thanks to the step-by-step and detailed examples of every concept.

With more than 7 exclusive hours of video, this comprehensive course leaves no stone unturned! It includes both practical exercises and theoretical examples to master Easy EDA. The course will teach you PCB designing in a practical way, from scratch, and step by step.

In the course, we'll cover a wide variety of topics, including:

  • Introduction to EasyEDA, PCB and course dynamics

  • Login and general familiarization with the user interface

  • Complete project setup and basic EasyEDA Commands and Preferences

  • Designing Schematic and Designing Schematic Components in EasyEDA from scratch

  • Creating and assigning Footprints of all schematic components and creating PCB libraries

  • Placement and Routing of components in PCB Layout, and also Routing using POLY method

  • Generating BOM and Gerber Files, getting quotation of board from fabricator

  • Generating Schematic component and Footprint of a Complex component

  • Designing from scratch 2 complete final projects to practice everything learned

  • Mastery and application of absolutely ALL the functionalities of the software

  • Practical exercises and much more!

In other words, what I want is to contribute my grain of sand and teach you all those things that I would have liked to know in my beginnings and that nobody explained to me. In this way, you can learn to solve a wide variety of projects quickly and make versatile and complete use of PCB Design. And if that were not enough, you will get lifetime access to any class and I will be at your disposal to answer all the questions you want in the shortest possible time.

Learning EasyEDA and PCB has never been easier. What are you waiting to join?

Who this course is for:

  • Beginners who have never used EasyEDA before
  • Electronic operators, engineers, students... who want to learn a new PCB desig and digital electronics software
  • Intermediate or advanced PCB and EasyEDA students who want to improve their skills even more!

Report abuse