Omron PLC PID Control (CX-Programmer)

Name: Omron PLC PID Control (CX-Programmer)
Rating: 4.5 (64 reviews)

Learn how to use the PID and TPO instruction on Omron PLC

Created byMehdi Alinoori

Last updated 9/2021

English

What you'll learn

Omron PLC PID Instruction
Omron PLC TPO Instruction
What is P, I and D, and how will effect on Controller
How you can Tune P,I and D
How you can use Auto Tune in PID Instruction

Course content

1 section • 6 lectures • 1h 31m total length

What is PID Controller?8:51
Write a program for PID control in cx-programmer for real system7:36
In this section, with a practical project, we will teach you how to use the PIDAT instruction and you will see how PID control works in a temperature control system.
TPO Instruction in Omron PLC19:59
In this section, we will get acquainted with the TPO instruction and you will see how we use the TPO instruction to convert the analog output of the PID instruction to digital.
Description of P, I, and D6:35
In this section, you will get acquainted with the parameters P, I, and D of the PIDAT instruction and you will see what effect each parameter will have on the controller.
PID Instruction in Omron PLC36:50
Using Auto-Tune for Thermoform Machine12:01
In this section, by using the AUTOTUNE feature on the thermoforming device, you will see how we can easily obtain the parameters P, I, and D automatically.

Requirements

Knowledge about CX-Programmer

Description

In this training course, you will learn the Omron Instruction for PID control, the PIDAT Instruction, and how to use it as well as adjust its parameters for different situations.

You will also learn the TPO instruction and learn how to convert PID analog output to digital by combining PID and TPO.

also in this training course, you will get acquainted with the parameters P, I, and D and you will see how each of them affects your control system.

Finally, in a practical project that is a thermoforming machine, we use the PID and TPO instructions and show how the PID instructions can be obtained automatically with the Auto-Tune capability of the PID instruction.

This course is based on my practical experiences and all the issues that have been used one by one in projects. so you can make sure you can use it without any problem in projects that you have.

Also, after viewing the course, if you think it is a useful topic that can be added to the course, send it to me so that it can be added to the course after review.

After watching this course, you can send your questions through the available communication channels and I will try to answer your questions.

Who this course is for:

For everyone that uses or wants to use Omron PLC