[New] Nuage SD-WAN lab installation in GNS3 step by step

Name: [New] Nuage SD-WAN lab installation in GNS3 step by step
Rating: 4.3 (32 reviews)

Installation of Nuage SD-WAN lab in GNS3 with all it's management plane, control plane and the data plane.

Created bySaifudheen Sidheeq

Last updated 9/2020

English

What you'll learn

Understand different components used by Nuage VNS (SD-WAN solution), and it's connectivity.
You will be able to install each components on GNS3 and build your SD-WAN topology.
Practice makes perfect, so it's more of LAB then the theory.

Course content

14 sections • 39 lectures • 4h 18m total length

Welcome to Nuage SD-WAN lab in GNS3- Introduction3:55
SDN vs SDWAN and its benefits5:22
Benfits over SDWAN as compared traditional networking4:06
Introduction Nuage VNS and its components6:08

How to setup GNS3 for this lab6:32
3 GNS3 installation options2:38
Adding Network Virtual adapter using Viritualbox.1:26
Install VirtualBox and add a virtual network adapter for the Nuage SD-WAN lab, then configure the adapter's IP address to connect to the lab network.
Uploading the prerequisite images to the GNS3 server2:54
Copy lab images to the Kimmo folder on the GNS3 server, then drag them in to avoid large-file freezes, preparing NSG, IOS, DNS PoPs, and HP BSR.
Installing the uploaded images in GNS36:41
Introduction to lab4:58

Installation of the first control plane - VSC (Virtual Service Controller)10:33
Configure the first virtual service controller (vsc) with the management and control interfaces and static routes. Set the system name and address to establish the Nuage sd-wan control plane.
Install and configure the second VSC to the VSD5:27
Install and configure the second VSC on the VSD by adding the management and control interfaces, wiring the BSD connection, bringing the VSC online, and verifying connectivity.
VSC BGP EVPN configuration7:46

Requirements

You should have basic networking knowledge N+ or CCNA level
Basic Linux understanding
Basic understanding of GNS3 and how to use it.

Description

In this course we will be going through the installation of the Nuage SD-WAN in GNS3. This is not a official Nuage course, This is a step by step lab covering the installation of all the components and prerequisite services based on my experience with product in GNS3. The lab is designed with two branch sites connected to the datacenter where all the management and the control planes are located.

Who this course is for:

This is for those who are network engineers or students who wanted to learn more about new networking technologies Especially SDN side of things.

[New] Nuage SD-WAN lab installation in GNS3 step by step

What you'll learn

Explore related topics

Course content

Introduction4 lectures • 20min

Introduction to the LAB6 lectures • 25min

Installation of prerequisite network services2 lectures • 16min

Nuage VSD management plane installation2 lectures • 20min

Installation of Nuage control plane - VSC3 lectures • 24min

Encrypting the connection between the VSD and VSC -XMPP - VSC and NSG -OPENFLOW2 lectures • 11min

Nuage Proxy installation3 lectures • 18min

12 Elasticsearch installation1 lecture • 9min

13. Uncluttering the environment and adding the ISP switches1 lecture • 9min

14. NSG installation or bootstrapping6 lectures • 42min

Requirements

Description

Who this course is for: