"NEBOSH-IGC", Element-1, Health and Safety Foundation.
What you'll learn
- Students learn and prepare well for the examination of "NEBOSH IGC" , Health and Safety Foundation.
- Learn about the Scope of Health and safety, Safety Act and History, What is Health and Safety? What is Welfare Protection? What is Environmental Protection?
- Learn about Occupational Accidents, Commuting Accidents, Dangerous occurrences, Occupational diseases and Work-related ill health problems,
- Learn about Physiological and psychological problems, hazards and risks, the degree of risk, Hazard of tripping and falling
- Learn about Moral, economic and legal reasons for health and safety. Statistics of International Labour Organisation. Direct and Indirect costs of accidents
- Learn about events to No damage to property and No injury to people. Events to damage to property or machinery, but No injury to personnel. Injury to personal
- Learn about Injury to personnel, but no damage to property. Insurance cost and liability. safe workplace and safe plant and equipment.a safe system of work
- Learn about health and safety regulations. Employers basic responsibilities. Workers responsibilities and rights. additional rights of workers
- Learn about What is Non-Compliance? R of enforcing authorities and other external agencies. Roll of Insurance Companies. Roll of International Standards
- Learn about OHSAS 180001:1999. Internal and external data sources of information. Framework for health and safety management. Elements of ILO-OSH 2001
- Learn about Planning and implementation. Evaluation and Implementation. Action for improvement. Auditing. Continual improvement.
Requirements
- NO prerequisites
Description
Introduction to Health Safety and Environment- Scope of Health and Safety in the Industries- What is Health and Safety? - safety Act and History- Health and Safety in early1900 - Health and safety before 1970 - What is Welfare Protection? - What is Environmental protection? - Accidents and other events - Difference between Incidents and Accidents - What is a Near miss -
Learners will become competent in the following subject matters:
The Scope of Health and safety, Safety Act and History, What is Health and Safety? What is Welfare Protection? What is Environmental Protection?
Occupational Accidents, Commuting Accidents, Dangerous occurrences, Occupational diseases and Work-related ill health problems
Physiological and psychological problems, hazards and risks, the degree of risk, Hazard of tripping and falling
Moral, economic and legal reasons for health and safety. Statistics of International Labour Organisation. Direct and Indirect costs of accidents
Events to No damage to property and No injury to people. Events to damage to property or machinery, but No injury to personnel. Injury to personal
Injury to personnel, but no damage to property. Insurance cost and liability. safe workplace and safe plant and equipment.a safe system of work
Health and safety regulations. Employers basic responsibilities. Workers responsibilities and rights. additional rights of workers
What is Non-Compliance? R of enforcing authorities and other external agencies. Roll of Insurance Companies. Roll of International Standards
OHSAS 180001:1999. Internal and external data sources of information. Framework for health and safety management. Elements of ILO-OSH 2001
Planning and implementation. Evaluation and Implementation. Action for improvement. Auditing. Continual improvement.
Who this course is for:
- Diploma Holders and Graduates in Engineering. - Arts and Science Graduates
Instructor
- 3.8 Instructor Rating
- 98 Reviews
- 313 Students
- 10 Courses
· 11 Years as Supervisor / Engineer at India in Heavy Fabrications, Welding, Erection, and Shutdown maintenance in Oil and Refineries.
· 3 years of experience as Training Manager at Indonesia
· 7 years of experience as Training Superintendent at India in the private Industrial Training Institute.
· 6 years experience as Department Head for Welding and Mechanical Instructor in a Vocational Training Institute at Oman.
· 9 Months experience as a Welding Instructor in a vocational Training Institute in Oman.
· 6 years worked as Competency and Training & Development Specialist/Coordinator at Dubai for HSE and Technical Training Development, and Competency Assurance for the Eastern Hemisphere (Dubai, Baku, Batam) of J Ray McDermott Middle East,. Coordination with training and Development staff in different locations of the Hemisphere for the implementation of Training, Development, and Competency Assurance strategies and procedures, for Company employees, Clients, and Contractors. McDermott Training Department is a Registered Centre with EAL (Engineering and Marine Training Authority Awards Ltd,. UK.) for NVQ and Competency Awards. The complete Competency Assessments system and methodology introduced by me in 2002.
· Approved Senior Mechanical Inspection Engineer for Petroleum Development Oman.
· Worked with Petroleum Development Oman (various desert sites) for 3 years as Company representative for Quality Audits, QA/QC Inspections of Mechanical equipment and Machinery, welding, fabrication, erection of Oil storage tanks, underground and above-ground pipelines, Erection, repair and maintenance of Beam pumps and related pipelines. Construction and commissioning of Gathering Stations and Site HSE Training and compliance and Competency Assurance. On job Training for the Arab candidates.
Present:
· For the last 9 years working as Professor in Mechanical Engineering in an Engineering College (JNT University) and NEBOSH trainer for B Tech candidates
· For the last 8 years worked as Professor for Oil well Drilling Technology and Oil well production Technology, Oil and Gas series Electrical Safety and Electrical Hazardous Area Equipment subjects at Meridian School of Oil and Gas, Chennai.
· Working as Chief Advisor for International Journal for Multidisciplinary Scientific Research.
Professional ExperTISE
· Working as a Subject Matter Expert (SME) for M/S. Merittrac (P) Ltd., Bangalore, India.
Working as Consultant & Quality Inspector (OIL & GAS STREAM), IVQ 8510, Advanced Diploma in Oil and Gas and HSE, for Manipal-City & Guilds Skills Training Private Limited,( A Venture of Manipal University)
· Worked as External Verifier and Quality Inspector for City and Guilds London, UK, exams in IVQ Construction Industry (Advanced Diploma level) for the Middle East.
· Working as Assessor and Subject Matter Expert (SME) for Skills India Private Ltd., New Delhi.
· Working as Technical Consultant for TAAL Tech India Private Limited, Bangalore.
· Conducted Train the trainer program at Dubai, Indonesia, Azerbaijan and Singapore
TECHNICAL QUALIFICATIONS
S. NO
QUALIFICATIONS
CERTIFICATION AUTHORITY
1
Diploma In Mechanical Engineering
State Board of Technical Education, Hyderabad, INDIA
2
Associate Examination of the Institute of Structural Engineers, Calcutta. (INDIA)
Institute of Structural Engineers. (INDIA)
3
4-year Graduate Program in Bachelor of Science in Mechanical Engineering
Capitol University, USA.(Dubai Centre, Knowledge village)
4
2 year Post Graduate Program in Master of Science in Mechanical Engineering
Capitol University, USA. .(Dubai Centre, Knowledge village)
5
2 years Post Graduate Program in Master of Science in Occupational Health and Safety
Concordia University. .(Dubai Centre, Knowledge village)
6
MBA in Human Resources Awarded by ABET International Open University,
California, USA.
ABET International Open University, California, USA. .(Dubai Centre,)
7
Ph.D. in Mechanical Engineering
Capitol University, USA. .(Dubai Centre, Knowledge village)
8
Certified (TEFL) Teaching English as a Foreign Language Teacher
London Teacher Training College. UK
9
Certified (TESL) Teaching English as a Second Language Teacher
Alison, Ireland
10
Certified On-Line Tutor. Level-3, awarded by City and Guilds, UK,
City and Guilds, UK
11
NVQ Trainer & Assessor Award D32/33
Royal Society Of Arts, UK.
12
NVQ Internal Verifier Award D34
Engineering and Marine Training authority Ltd., .Uk
13
NVQ Level-4, Learning and Development Coordinator
Engineering and Marine Training Authority Ltd., , UK
14
Senior Certified Welding Inspector
American Welding Society.
15
Certified Welding Educator
American Welding Society
16
OSHA-501, Authorized Safety Trainer For General Industry
OSHA, US Department of Labour
17
Level – 2, NDT Inspector- RT-MT-PT, of American Society
American Society for Non-Destructive Testing (ASNT)
18
QMS - ISO 9001-2000 Lead Auditor
BSI Management Systems Training, UK.
19
Six Sigma Green Belt by BSI Management Systems Training, UK
BSI Management Systems Training, UK
EXPERIENCE DETAILS
PERIOD
COMPANY NAME
POSITION
Present from 28/8/2011
DBS Institute of Technology, KAVALI, Nellore, AP, India Approved by All India Council of Technical Education, Delhi.
JNT University, Anantapur, AP
Professor in Mechanical Engineering
From 2011
1. Meridian School of Oil and Gas, Chennai.
2. Annes Academy, Kanyakumari.
Guest Professor for Oil Well Production
Technology and Oilwell Drilling Technology
From Dec 2010 To Feb2011
Saudi Petroleum Services Polytechnic, Dammam. SA
Mechanical Instructor/Assessor/ Internal Verifier
23/12/08
30/7/2011
Petroleum Development of Oman (3rd Party Inspections Velosi LLC contract)
Company Representative / Senior Mechanical Inspection Engineer (Interior Sites)
7/10/02
20/11/08
J Ray McDermott Middle East Inc., Dubai
HR-Training Department, Senior Professional Grade-B
Jun,2001
Apr,2002
National Training Institute, Oman
Mechanical/Welding Instructor /Assessor / Verifier.
Sept,1995
Jul,2000
Technical Training Institute, Oman
Dept., Head/ Trainer Mechanical/Welding / Assessor / Verifier / Instructor/
Dec,1988
June,1995
Oxford India Institute of Technology, Madras, India.
Trades Superintendent (Craftsmen training)
Oct,1985
Nov,1988
PT Textima Group of Industries, Indonesia
Manager (Training & QC)
Mar,1978
Apr,1984
Prestige Group of Industries, Indore, India
Manager (QA/ QC)
Apr,1974
Feb,1978
Coromandel Steels Ltd, Madras, India
Shift supervisor
Jun1967
Feb,1974
Associate Chemical and Mechanical Engineers, Madras, India
Site supervisor
Madras Atomic Power Project, Kalpakkam.