Mastering AutoCAD 2023 in 2 dimensions

Learn to draw lines, use escape to exit commands, and perform undo and redo, plus zoom with the mouse wheel and explore zoom options like all, center, dynamic, extents, object.

Master how to use the ortho tool to constrain lines to horizontal or vertical directions, accessible via the status bar, f8, or the shift key in AutoCAD 2023.

Learn to draw 2d lines in AutoCAD 2023 using polar tracking to constrain lines to angles as 0, 15, and 45, with increment options of 5, 10, and 15 degrees.

Master snapping with OSNAP in AutoCAD 2023 to draw lines from endpoints, midpoints, centers, and tangents, and use snap overrides to create precise shapes.

Activate dynamic input, draw a line, enter length and angle, or use absolute coordinates with #30,30 or relative coordinates with 30,30 to end at the desired point.

Master absolute and relative coordinates to draw lines in AutoCAD 2023, using 10,10 and 40,20, and the @ symbol for relative input. Learn to open and close dynamic input.

Learn to draw rectangles and squares in AutoCAD 2023 using absolute and relative coordinates, set length and width, and use options like chamfer and fillet.

Learn how to draw circles in AutoCAD 2023 in 2d using center radius, center diameter, two-point, three-point, repeat circle, tangent radius, and tangent to three lines options.

Learn to draw arcs in AutoCAD 2023 in 2d by using arc commands and options such as 3 points, start-center-end, start-center-angle, start-center-length, start-end-angle, start-end-direction, and start-end-radius.

Learn to draw a two-dimensional ellipse in AutoCAD 2023 using center, axis end, and elliptical arc options, with coordinates and start-end angles.

Create polygons with five sides inside or outside a circle in AutoCAD 2023 by selecting inscribed or circumscribed options, specifying the center and a radius.

Learn to draw a polyline in AutoCAD 2023 by using the home tab, draw, polyline, or by typing PL, compare it with a line, and adjust width while adding arcs and lines.

Draw and edit splines in AutoCAD 2023 in 2 dimensions, adjusting fit points and tangent directions, and unite two splines with the blend command.

Learn to divide objects into segments or by length, measure segments, and use the block command to create blocks for repeated elements in 2D AutoCAD drafting.

Learn to draw a hatch in AutoCAD 2023, including solid, gradient, pattern, and user-defined hatches, with associative behavior, closed object requirement, scale control, and match properties.

Learn to draw a donut with inside and outside diameters, use a construction line for floor plans, create a ray that extends to infinity, and draw a revision cloud.

Mastering AutoCAD 2023 in 2 dimensions shows how to copy objects between drawings or within a drawing using copy with base point from the home tab clipboard panel, and paste.

Learn to move and erase objects in AutoCAD 2023, using the move command from the home tab or typing m, and delete via the erase tool or typing e.

Use the rotate command in AutoCAD to pivot objects around a base point, specify rotation angles, and access copy or reference options for flexible transformations.

Master the AutoCAD scale command to resize objects: pick a base point, scale by factor for doubling or halving, or use a reference length to set a new length.

Learn to use the mirror command in AutoCAD to reflect objects, choose whether to erase the source, and control text mirroring with the mirrtext variable set to 0 or 1.

Learn to use the stretch command (STR) in AutoCAD 2023 to select objects with a crossing polygon, specify a base point, and stretch the object, including diagonally.

Learn how to use the offset command in AutoCAD 2023 to create offset shapes, with options for distance and through points, applicable to rectangles, lines, and circles.

Learn to use the array command in AutoCAD 2023 to create rectangular, polar, and path arrays, and explore the design center palette to place blocks like chairs and desks.

Master trim and extend commands in AutoCAD 2023 to shape lines precisely. Learn to use the home tab, modify panel, and quick mode with shortcuts.

Use the break command to cut an object into two pieces at a chosen point, and use break at point to split a selected object at a single point.

Explore how the explode command transforms objects into their constituent parts, breaking polylines, rectangles, and blocks into individual elements using the home tab or X shortcut.

Master the lengthen command in AutoCAD 2023 to resize lines and arcs by delta length, percent, total, or dynamic (freehand), accessible via len or the modify panel.

Learn to use the chamfer and fillet commands in AutoCAD 2023 to bevel and round edges. Set chamfer distance and fillet radius to shape corners on rectangles.

Learn to join objects into a single polyline with the join command in AutoCAD 2023 in 2 dimensions, and use pedit to edit vertices and set 0.2 to 0.5 widths.

Learn to create single line and multiline text in AutoCAD 2023, adjust height and rotation, and apply text styles like style 1 with Times New Roman italic.

Experiment with the AutoCAD 2023 text editor, mastering multiline text, formatting (font, size, style, color), justification, bullets, symbols, spell check, and ruler and columns.

Explore the layer properties manager to create and manage layers, control on/off and freeze/thaw visibility, set colors, and assign objects to layers such as layer 1 and layer 2.

Learn to manage layers in AutoCAD 2023 by turning layers on and off, thawing and freezing, locking and unlocking, and deleting layers to streamline floor plan workflows.

Learn to create and customize dimension styles using the dimension style manager in AutoCAD 2023, including lines, arrows, text, fit options, units, and tolerances.

Master the essential 2d dimensions by setting linear and vertical dimensions, and use align, angular, arc length, radius, and diameter tools with shortcuts DLI, DAL, DAN, DIMARC, DRA, and DDI.

Learn to place dimensions in an existing drawing using linear, continue, and baseline dimensions in AutoCAD.

Master distance and area commands in AutoCAD 2023 for two-dimensional drafting, using DI and AA to measure, add and subtract areas, view perimeters, and inspect results in the command window.

Learn to create and edit blocks in AutoCAD 2023 in 2 dimensions by converting objects into blocks, copying them, and using the block editor to propagate changes to all instances.

Learn to write and save a block named chair 2 on the hard disk drive, then insert it into another drawing via the block palette and libraries.

Learn to use linetypes in AutoCAD, load a batting linetype, apply it to layers, and adjust the linetype scale via the properties panel.

Pan drawing without zoom changes using the mouse wheel, right-click, or P command; copy attributes with match properties from a source object to a destination object; regen model, smooth arcs.

Attach images and external references in AutoCAD drawings; learn to attach images with scale and insertion point, and manage external references by editing the source drawing and reloading updates.

print from model space in AutoCAD by selecting a printer or pdf and iso a2 paper. set the 1:50 plot scale, adjust lineweights, preview, and export to pdf.

Master layout printing by configuring page setup, creating multiple viewports in paper space, and assigning A2, A1, and A4 layouts with precise scales for detail views.