Udemy
    •  
    •  
    •  
    •  
    •  
    •  
    •  
    •  
Subscribe
Turn what you know into an opportunity and reach millions around the world.
Learn More
Your cart is empty.
Keep shopping
MagiCad for Revit. Find Exactly Length of Electrical Circuit
Rating: 3.8 out of 5(10 ratings)
38 students

MagiCad for Revit. Find Exactly Length of Electrical Circuit

Course for Dummies. Beginner to an advance/professional level in Revit using MagiCad. MEP Engineers.
Created byIon Oboroc
Last updated 8/2022
English
English [Auto],

What you'll learn

  • When you complete this course you will have the skills and knowledge to use MagiCad for Revit to calculate exactly the length of the electrical circuits.
  • You will be able to calculate exactly the length of circuits. Also you will know how to size the Cable Trays.
  • You will understand how to use and set: Panelboard, Distribution System in Revit, Electrical Connector, Alternative voltage definition in Revit etc.
  • You will learn how to use Revit and MagiCad Electrical for creating Electrical Circuits.

Explore related topics

Course content

2 sections • 16 lectures • 3h 10m total length

  • Welcome to this course !0:35

    Begin your MagiCad for Revit journey with an introductory overview and practical steps to find exactly the length of electrical circuits using MagiCad.

  • Alternative voltage definition in Revit.9:21

    Learn the alternative voltage definition in Revit, including nominal and rms values, voltage limits, and opening electrical settings to define line and phase voltages for single and three-phase systems.

  • Electrical Connector.6:24

    Explore electrical connectors in Revit to simulate parameters such as voltage, power, and power factor for lighting, electrical equipment, or other devices.

  • Panelboard. Distribution System in Revit.9:11

    define a power source and connect a panel board in revit, then configure distribution systems with star and delta three-phase options and voltage ranges.

  • Demonstration_Revit_Sample_Project16:55

    Explore creating and configuring electrical circuits in a Revit sample project, including defining voltage definitions such as 400 volts and 240 volts, building distribution systems, sockets, connectors, and panels.

  • Sample_Project_MagiCad7:55

    Explore how MagiCad for Revit manages electrical circuits, connectors, and parameters like voltage, apparent load, and poles; learn to edit families, set panel voltages, and build a distribution system.

  • Length of the circuits in Revit14:03

    Learn to measure circuit length in revit by connecting fixtures to a panel, selecting wiring types, and using orthogonal paths with offsets and control points.

Requirements

  • Revit
  • Basic knowledge about electrical engineering.

Description

  • In this course, you will learn how to calculate exactly the length of the electrical circuits using MagiCad for Revit.

  • Also, this course starts from the basic and you will get familiar to the workflow to create and set properties for electrical circuits.

  • Using MagiCad will be able to new features in Revit which will give you new possibilities beside those from Revit.

  • Here are the main topics from the course. Please follow them in the order even if sometimes few of them are well known.

  • Alternative voltage definition in Revit.

  • Electrical Connector. Explained all its parameters.

  • Panelboard. Distribution System in Revit.

  • Demonstration_Revit_Sample_Project.

  • Sample_Project_MagiCad.

  • Length of the circuits in Revit.

  • Cable packets. Draw Cable packets.

  • Cable packets. Draw Cable packets. Example.

  • Cable packet connection tools.

  • Cable packet length.

  • Length between elements of the electrical circuit

  • Wire Type Management.

  • Bill of Material. Total Length of the Electrical Circuit.

  • Merge Parameter.

  • Cable Layout.

  • You will learn how to create electrical circuits, distribution system, voltages etc.

  • You will understand how to correctly configure Revit settings for electrical systems.

  • You will get familiar with different types of parameters: family, project or shared parameters.

  • The user should have a basic background about electrical engineering and basic about Revit.

Who this course is for:

  • Revit users interested for the length of the electrical circuit along Cable Trays.
  • MagiCad Users
  • MEP Consultants. REVIT/BIM Electrical Modeler
  • Engineers.

Report abuse