Your cart is empty.
Keep shopping
Teach on Udemy
Turn what you know into an opportunity and reach millions around the world.
Learn MoreLearning SOLIDWORKS : For Students, Engineers, and Designers
Rating: 4.4 out of 54.4(3,414 ratings)
116,262 students
Learning SOLIDWORKS : For Students, Engineers, and Designers
For Basic and Intermediate Users
Created byCADCIM Technologies
Last updated 7/2020
English
What you'll learn
- The students will learn the basic tools of Solidworks. Also they will get a thorough knowledge of Sketch, Part, Assembly, and Surface environments of Solidworks.
Explore related topics
Course content
11 sections • 95 lectures • 9h 16m total length
- Introduction to SOLIDWORKS3:50
After going through this video you will get familiar with the real world applications of SOLIDWORKS and its use in the industry.
- User Interface of SOLIDWORKS8:41
After watching this video, you will become familiar with the interface of SOLIDWORKS.
- Customizing Command Managers and Toolbars in SOLIDWORKS4:52
After watching this video, you will be able to customize the interface of SOLIDWORKS.
- Starting a New File and Opening an Existing one in SOLIDWORKS3:28
After watching this video, you will be able to start a new file and open an already created file.
- Entering the Sketching Environment4:53
After watching this video, you will learn how to get into the sketching environment of SOLIDWORKS.
- Creating Line, Centerline, and Midpoint Line8:00
After watching this video, you will be able to create lines, center and midpoint lines.
- Creating Circles3:30
After watching this video, you will be able to create different types of circles.
- Creating Arcs3:58
After watching this video, you will be able to create different types of arcs.
- Creating Rectangles4:26
After watching this video, you will be able to create different types of rectangles.
- Creating Polygons3:29
After watching this video, you will be able to create different types of polygons.
- Creating Splines3:35
After watching this video, you will be able to create different types of splines.
- Creating Slots3:57
After watching this video, you will be able to create different types of slots.
- Placing Points2:18
After watching this video, you will be able to place points in the drawing.
- Creating Ellipses and Elliptical Arcs2:45
After watching this video, you will be able to create ellipses and elliptical arcs using various methods.
- Creating Parabolic and Conic Curves3:18
After watching this video, you will be able to create different types of curves used in drawings.
- Creating Equation Driven Curves2:55
After watching this video, you will be able to create curves by writing their equations.
- Drawing Display Tools5:03
After watching this video, you will learn how to use the drawing display tools.
- Deleting Sketching Entities1:56
After watching this video, you will learn how to delete sketched entities.
- Practice Example 16:17
This practice example will give you hands on experience in creating sketches.
- Practice Example 24:33
This practice example will give you hands on experience in creating sketches.
- Practice Example 35:54
This practice example will give you hands on experience in creating sketches.
- Trimming Entities5:27
After watching this video, you will learn how to trim unwanted parts from a sketch.
- Extending Entities2:11
After watching this video, you will learn how to extend sketched entities up to the required points.
- Convert Entities Tool2:21
After watching this video, you will learn how to convert edges of a solid model into sketches.
- Creating Intersection Curves2:26
After watching this video, you will learn how to create intersection curves.
- Filleting Entities4:16
After going through this video, you will be able to apply fillets at the corners of the sketches.
- Creating Chamfers3:29
After going through this video, you will be able to add chamfers at the corners of the sketches.
- Offsetting Entities4:17
After going through this video, you will be able to offset the sketched entities at the required distance values.
- Offset on Surface Tool2:57
After watching this video, you will be able to offset edges and faces of 3D Model.
- Mirroring Entities3:42
After going through this video, you will be able to create to create a mirror image of the selected entities.
- Dynamically Mirror Entities2:56
After going through this video, you will be able to mirror entities dynamically about a symmetry line while sketching.
- Moving Entities3:27
After going through this video, you will be able to move sketched entities from one location to another.
- Rotating Entities2:16
After going through this video, you will be able to rotate the sketched entities at specified angle values.
- Scaling Entities2:14
After going through this video, you will be able to scale the sketched entities to a specified scale factor.
- Stretching Entities1:34
After going through this video, you will be able to change the shape and size of the entities by stretching them along different directions.
- Copying and Pasting Entities2:57
After going through this video, you will be able to copy and paste sketched entities within the same drawing file or some other drawing file.
- Creating Linear Patterns4:14
After going through this video, you will be able to create copies of objects using the linear pattern tool.
- Creating Circular Patterns3:36
After going through this video, you will be able to create copies of objects using the circular pattern tool.
- Modifying Sketch Patterns2:47
After going through this video, you will be able to modify the created patterns.
- Splitting Entities3:12
After going through this video, you will be able to split the entities into required number of parts.
- Writing Text2:37
After going through this video, you will be able to add text in your drawing file.
- Practice Example 16:22
This practice example will give you hands on experience in editing and modifying sketches.
- Practice Example 25:40
This practice example will give you hands on experience in editing and modifying sketches.
- Practice Example 36:19
This practice example will give you hands on experience in editing and modifying sketches.
- Adding Relations4:46
After going through this video, you will be able to add geometric relations between the entities in a sketch.
- Adding Automatic Relations2:45
After going through this video, you will be able to learn about the automatic relations that are applied in a sketch.
- Dimensioning a Sketch and Smart Dimension Tool6:12
After going through this video, you will be able to use the Smart dimension tool to add various types of dimensions in a sketch.
- Adding Horizontal and Vertical Dimensions11:18
After going through this video, you will be able to add horizontal and vertical dimension values in a sketch.
- Aligned Dimensions2:17
After going through this video, you will be able to add aligned dimensions to a sketch.
- Angular Dimensions3:21
After going through this video, you will be able to add angular dimensions to a sketch.
- Adding Diametric Dimensions3:34
After going through this video, you will be able to add diametric dimensions to a sketch.
- Adding Radial Dimensions2:21
After going through this video, you will be able to add radial dimensions to entities in a sketch.
- Adding Linear Diametric Dimensions2:55
After going through this video, you will be able to add diametric dimensions in a linear fashion.
- Adding Ordinate Dimensions3:43
After going through this video, you will be able to add dimensions in the form of coordinate values at a particular point of the sketched entity.
- Practice Example 110:42
This practice example will give you a hands on experience in adding relations and dimensions to a sketch.
- Practice Example 211:09
This practice example will give you a hands on experience in adding relations and dimensions to a sketch.
- Fully Defining the Sketches4:47
After going through this video, you will be able to make the sketches fully defined by adding required dimensions and relations to them.
- Dimensioning the True Length of an Arc2:20
After going through this video, you will be able to add the true length dimension value to an arc.
- Measuring Distances6:58
After going through this video, you will be able to measure distances between any two points in a drawing.
- Determining the Section Properties of Closed Sketches3:42
After going through this video, you will be able to calculate the section properties of closed sketches.
- Modifying the View Orientation6:16
After going through this video, you will be able to the view the models in different orientations.
- Changing the View Orientation using the Reference Triad3:53
After going through this video, you will be able to change the view orientation using the reference triad.
- Displaying the model in different Viewport configurations3:21
After going through this video, you will be able to view the model in different viewport configurations.
- Display Modes of a Model2:48
After going through this video, you will be able to change the display modes of a model.
- Assigning Materials to the Model2:45
After going through this video, you will be able to assign materials to a model.
- Need for creating Planes2:10
After going through this video, you will come to know about the need of creating planes.
- Creating Offset Planes and Parallel Planes passing through a Point4:25
After going through this video, you will be able to create offset planes and parallel planes passing through a Point.
- Creating planes at angle to an existing plane and passing through Lines, Points3:34
After going through this video, you will be able to create planes at angle to an existing plane and passing through Lines, Points.
- Creating a plane normal to a curve and in the middle of two faces3:19
After going through this video, you will be able to create a plane normal to a curve and a plane in the middle of two faces.
- Creating a plane on non-planar surface2:33
After going through this video, you will be able to create a plane on non-planar surface.
- Creating Reference Axes4:12
After going through this video, you will be able to create reference axes of your own.
- Creating Reference Points5:27
After going through this video, you will be able to create reference points of your own.
- Creating Reference Coordinate Systems2:25
After going through this video, you will be able to create reference Coordinate systems of your own.
- Creating Center of Mass2:24
After going through this video, you will be able to calculate center of mass for a solid body..
- Practice Example 112:51
This practice example will give you hands on experience in creating bodies using reference planes.
- Creating Extruded Features8:53
After going through this video, you will be able to add thickness to sketches using the Extruded Boss/Base tool.
- Creating Revolved Features3:52
After going through this video, you will be able to create revolved features using Revolved Boss/Base tool.
- Creating Extruded Cuts6:00
After going through this video, you will be able to create cuts in the extruded feature.
- Creating Revolved Cuts3:49
After going through this video, you will be able to create revolved cuts in the created features.
- Determining the Mass Properties of Solid Models2:49
After going through this video, you will be able to calculate the mass properties of a solid body.
- Dynamically Rotating the View of a Model3:00
After going through this video, you will know how to dynamically rotate the view of a model.
- Practice Example 117:05
This practice example will give you hands on experience in creating part models.
- Practice Example 29:29
This practice example will give you hands on experience in creating part models.
- Practice Example 33:41
This practice example will give you hands on experience in creating part models.
- Practice Example 411:15
This practice example will give you hands on experience in creating part models.
- Practice Example 513:40
This practice example will give you hands on experience in creating part models.
- Practice Example 116:16
This practice example will give you hands on experience in creating advanced part models.
- Practice Example 28:41
This practice example will give you hands on experience in creating advanced part models.
- Practice Example 317:02
This practice example will give you hands on experience in creating advanced part models.
- Practice Example 414:20
This practice example will give you hands on experience in creating advanced part models.
- Practice Example 511:36
This practice example will give you hands on experience in creating advanced part models.
- Practice Example 134:32
This practice example will give you hands on experience in creating assemblies.
- Practice Example 28:46
This practice example will give you hands on experience in creating assemblies.
Requirements
- This course starts teaching you from scratch so there are no prerequisites.
Description
SOLIDWORKS is a very productive 3D CAD software tool. It helps to design various products and services, testing them in very cost effective way like Model and prototype testing as you learned earlier in engineering degree class.
The Solidworks have wide range of applications in industries such as
Aerospace
Defense
Automotive
Transportation
Machinery
Heavy Equipment
Consumer products
Mold & Tools design
Electronics
Sheet metal work
Process Plant
Energy conservation
Construction
Medical tools
Product design and other engineering services.
This course will help you in understanding and learning the basic and advanced tools of the software. You will get a thorough knowledge and hands on experience on Sketch, Part, Assembly and Surface Environments of SOLIDWORKS.
Who this course is for:
- Students, Engineers, Diploma Holders, CAD Designers, and Product Engineers.