IT & Software
Hardware
HMI
Learn Siemens S7-1200 PLC & HMI from Scratch using TIA
4.4 (1,974 ratings)
Course Ratings are calculated from individual students’ ratings and a variety of other signals, like age of rating and reliability, to ensure that they reflect course quality fairly and accurately.
7,390 students enrolled

Learn Siemens S7-1200 PLC & HMI from Scratch using TIA

Learn wiring, programming and Installation of S7-1200 PLC & HMI with Siemens TIA- Total Integrated Automation Software
Bestseller
4.4 (1,974 ratings)
Course Ratings are calculated from individual students’ ratings and a variety of other signals, like age of rating and reliability, to ensure that they reflect course quality fairly and accurately.
7,390 students enrolled
Created by Rajvir Singh, Rajvir Singh
Last updated 11/2019
English
English [Auto], Spanish [Auto]
Preview this course
Learn Siemens S7-1200 PLC & HMI from Scratch using TIA
Current price: $30.99 Original price: $44.99 Discount: 31% off
5 hours left at this price!
Buy now
30-Day Money-Back Guarantee
This course includes
  • 17.5 hours on-demand video
  • 19 articles
  • 42 downloadable resources
  • Full lifetime access
  • Access on mobile and TV
  • Certificate of Completion
Training 5 or more people?

Get your team access to 4,000+ top Udemy courses anytime, anywhere.

Try Udemy for Business
What you'll learn
  • Learn how to communicate PLC with PC using Siemens TIA
  • Learn how to convert standard circuits to PLC Circuits
  • Learn fundamentals commands of Siemens S7-1200 in TIA
Requirements
  • Basic Fundamentals of Electronics
  • Eagerness to learn PLC in enthusiastic environment
Description

     This course is specifically for the people who wants to kick start their training in Siemens PLC & HMI. We are using Siemens S7-1200 PLC and KTP 400 HMI along with Siemens TIA- Total Integrated Automation software for making tutorials. You will find high quality videos tutorials along with copy of presentation and PLC code used in the course. 

We are teaching programming in Ladder Logic with touch of FBD- Functional block Diagram. Later in HMI section we have interfaced Siemens S7-1200 PLC with HMI to learn monitoring and control of PLC parameters. 

Following is the pattern of the course:

  • Introduction lecture of the command
  • Exercise Example of the command
  • Factory I/O Industrial Application Example in real 3D Dynamics environment 
  • Quiz to evaluate your performance
  • Copy of presentation and PLC code (if applicable) with every lecture 

After learning this course, you would be able to install and program Siemens PLC and HMI in your project or industrial application.

    This course covers the basic fundamentals commands of PLC.
If you buy the course today, the updates would be included in the course for free. 

About Us:

NFI is an Industrial Automation Training Academy exists to bridge the skill gap between Industries & Engineering Colleges. We train students/professionals in Automation skills that can help them in securing their path to success. NFI provides quality education in the field of industrial automation control systems that are being installed across industries. The course material is designed in a way that helps students in acquiring knowledge of these systems and use revolutionary thinking to keep the productivity and profitability high while reducing downtime of machines and troubleshoot the systems faster

NFI offers E-Learning Industrial Automation Courses to facilitate the students & engineers far across the world. NFI uses motivational Learning tools & software & Self learning Video tutorial for flexible & easy learning. 

Who this course is for:
  • Engineering Students
  • Working Engineers - Maintenance, Production or Supervisors
  • Industrialist
Featured review
Razor Xo
Razor Xo ( 16 courses, 14 reviews )
a year ago
whether you are a beginner or proffesional or are just interrested in plc programming and the basisc of HMI or you want to learn the basics about Siemens TIA Portal this course is perfect for you!! i really like the addition of Factory I/O for real time examples in this course... the course is highly recommended...(also check out the Learn 5 plc's in a day course if you are a beginner like me ) the instructor has responded to all my questions i sent through email, very good!
Course content
Expand all 93 lectures 17:30:06
+ – Introduction to the Hardware- S7-1200 PLC
6 lectures 01:03:31

In this lecture you will learn about the PLC hardware and it's terminals.

S7-1200 PLC - PLC Hardware
Preview 08:09
Download Trial version software
00:11

In this lecture you will learn how the PLC Processor works with reference to it's SCAN Cycle.

S7-1200 PLC - How Processor Works?
16:20
S7-1200 PLC - PLC memory and Wiring the PLC
16:23

In this lecture you will see various Input/Output wiring types like SINK and SOURCE

S7-1200 PLC - PLC Input/Output Wiring Types
05:35

Learn how to convert basic Schematic diagram to PLC Ladder Logic via this course.

Converting Schematic to Ladder Diagram
16:53
Test your Skills- Bit Level Instructions
9 questions
+ – Introduction to Siemens TIA- Total Integrated Automation
2 lectures 22:27

In this lecture you will learn how to use basic features of Siemens TIA

Introduction to Siemens TIA - Features (LIVE Demo)
07:47

In this lecture you will learn how to communicate Siemens PLC with PC via Ethernet connection.

Introduction to Siemens TIA - Ethernet communication of PLC with PC
14:40
Test your Skills- TIA
5 questions
+ – Understanding General Elements of TIA
1 lecture 14:57

This lecture explains how to use network and branches in writing the ladder logic. 

Understanding the networks and branches
14:57
+ – Understanding Bit Logic Operations in TIA
8 lectures 01:41:28

In this lecture you will understand the basic fundamental commands NO (Normally Open), NC (Normally closed) and OUT. We have explained it via Siemens TIA software!

NO, NC & OUT Commands
Preview 16:44

Test your skills in exercise example of NO, NC and OUT.

Exercise Example
13:17
Exercise Example (2)
00:07
Test your Skills- Bit Logic Operations (1)
5 questions

After this lecture, you would be able to latch/ unlatch the outputs. 

SET & RESET Command for Latching/Unlatching
17:31
Test your Skills- Bit Logic Operations (2)
5 questions

After this lecture, you would be able to latch/ unlatch the outputs in groups easily

SET & RESET Field Command for Latching/Unlatching
09:06

Test your skills in exercise example of SET & RESET Field command for Latching/ Unlatching

Exercise Example
10:04

In this lecture, you will understand the concept of Rising and Falling Edge

Understanding Rising and Falling Edge
18:04
Test your Skills- Bit Logic Operations (3)
5 questions

This lecture gives you factory automation example of basic fundamentals commands like NO, NC and OUT. We are using Box Sorting application for the explanation.

Factory Automation Example on Bit Logic Operations
Preview 16:35
+ – Understanding Timer operations in TIA
7 lectures 01:36:08

This lecture explains the function of Timer Pulse in S7-1200. This timer can be used to generate Pulse timed signal with furthermore can be used to create blinking sequence. 

Understanding Timer Pulse
11:58

Test your skills on Timer Pulse

Exercise Example
16:21
Test your Skills (Timer Pulse)
5 questions

After this lecture you would be able to design ON- Time delayed ladder logic. 

Understanding Timer ON Delay
14:29

After this lecture you would be able to design OFF- Time delayed ladder logic. 

Understanding Timer OFF Delay
19:07

This lecture explains how to use Retentive timers in Siemens S7-1200. This type of timer can be used to pause/resume the timed operation logics

TONR - Retentive On Delay Timer
09:38
Test your Skills (TON, TOFF TONR)
10 questions

After this lecture you would be able to work with Data Blocks which are used to read/write elements of Timers/Counters. 

Customizing parameters of Timers via Data Block
08:51
Test your Skills (Timers via Data Block)
5 questions

We are using Filling/Draining Tank Level application  in factory automation environment as an example to explain the concept of Timers

Factory Automation Example on Timers!
15:44
+ – Understanding Counter operations in TIA
4 lectures 44:19

This lecture explains the Counter Up instruction which can be used to count the input events and generate output at specific counts. 

Understanding Up Counter
12:06

This lecture explains the Counter Down instruction which can be used to count the input events and generate output at specific counts. 

Understanding Down Counter
09:34

This counter is the combination of Count Up and Count Down type of counter. This makes it easy to increment and decrement the counts in the same counter. 

Understanding Up/Down Counter
13:35
Test your Skills (Counters)
10 questions

In this exercise we have used factory automation tol see the application of counters to count the boxes in conveyor line. 

Factory Automation Example on Counters
09:04
+ – Understanding Comparative operations in TIA
1 lecture 12:34

After this lecture you will learn how to fetch the data from Timers/Counters for comparison and generate output

Understanding Comparator operators - Greater, Less, Equal
12:34
Test your Skills (Comparative Operations)
6 questions
+ – Understanding Math operations in TIA
2 lectures 29:42

This lecture explains the fundamental instructions for mathematical calculation like Addition, Subtraction, Multiply, Division, Increment, Decrement, MOD and Calculate.

Understanding basic mathematical operations like Add, Sub, Mul and divide
17:12

In this lecture, you will see an exercise example of Math instructions.

Exercise Example
12:30
Test your Skills (Math operations )
6 questions
+ – Understanding MOVE operations in TIA
2 lectures 34:54

After this lecture you would be able to copy/move/store the information of timer/counter in Siemens S7-1200 data register. 

Move, Fill Move and Block Move Instructions
17:02
Test your Skills (Move)
5 questions

In this example, you will see a Tank Level application. Using comparison and move commands we are monitoring and controlling the level of water in tank. 

Factory Automation Example on Comparator & MOV operators
17:52
+ – Understanding various Program Control operations in TIA
1 lecture 15:08

After this lecture you will understand how to jump the ladders conditionally. 

Understanding Jump and Label instruction
15:08
Test your Skills (Jump)
5 questions