Learn ETABS & SAFE in the Structural Design of 15 Stories RC
What you'll learn
- Structural design of R.C building from A to Z included all structural element (columns, beams, all types of slabs, all types of foundations, shear walls, earthquake and wind design, check deflection, how we can determine the dimensions of the elements)
Requirements
- Have little information about structural design
Description
This course not just a tutorial on software ETABS and SAFE but it is a complete understanding about structural design analysis, how civil engineer must begin with the project, how he/she must think, how we can determine the dimension of the element before modeling them check it in the software. In this course we will design a 15 stories of a residential buildings, within the work we will define and design all types of slabs such as (waffle slab, one way ribbed slab, two way ribbed slab, flat slab and solid slab), all types of foundations such as (isolated,combined,strip and mat), earthquake with static and dynamic case, wind loads, columns and beams and shear walls + Advanced lectures in ETABS + Advanced lecture in SAFE and AllPile (design piles deep foundation of a tower of 25 stories) + design a swimming pool in ETABS
Example 2 Design a mosque with the Dome and minaret + piles foundation of the minaret to resist tension stresses in foundation we will use in the design ETABS, SAFE, SAP2000 software + learn how to design beams using SAP2000 + how to model the dome in ETABS or SAP2000
How to Model dampers in ETABS (Fluid Viscous damper FVD) and show the effect f using this type of damper on story displacement of the building
How create report and detailing drawings in ETABS
Who this course is for:
- Beginner and Expert
Course content
- Preview05:17
- Preview13:05
- 04:26Introduction Part 3 Waffle Slab Type 2 or Two Way Ribbed Slab
- 02:53Introduction Part 4 One Way Ribbed Slab
- 03:02Introduction Part 5 Flat Slab
- 02:50Introduction Part 6 Solid Slab
- 01:00Introduction Part 7 Stairs
- 09:42Lecture 1: Export from AutoCad to ETABS quick method of drawing and modeling
- Preview05:28
- 06:24Lecture 3 Define Materials
- 14:20Lecture 4 Define Sections
- 11:32Lecture 5 Shear Walls Drawings and Pier Labels assign
- 01:13Lecture 6 Retaining Walls Drawing
- 02:12Lecture 7 Columns Drawing
- 04:07Lecture 8 Beams Drawing
- 01:10Lecture 9 Stairs Drawing
- 04:37Lecture 10 Slabs Drawing
- 05:11Lecture 11 Meshing of Slabs and Walls
- 02:05Lecture 12 Supports Modeling
- 04:20Lecture 13 Define loads on slabs
- 01:56Lecture 14 Loads on the beams
- 24:58Lecture 15 Define earthquake Loads static case
- 04:21Lecture 16 Define Earthquake Loads Dynamic case
- 02:36Lecture 17 Define wind loads
- 04:12Lecture 18 Define Diaphragms
- 01:05Lecture 19 Define mass source
- 01:16Lecture 20 Define modal cases
- 02:53Lecture 21 Define stiffness modifiers
- 01:10Lecture 22 Check the model
- Preview00:56
- 04:30Lecture 24 Center of mass and center of rigidity
- 03:45Lecture 25 Scale earthquake loads
- 03:34Lecture 26 Check story displacement
- 03:48Lecture 27 Check story drift
- 11:02Lecture 28 Columns design
- 07:45Lecture 29 Shear wall design
- 01:39Lecture 30 Prepare the model for exporting to safe
- 13:57Lecture 31 Check Deflection in Safe
- 08:32Lecture 32 Waffle Slab and beams design
- 03:56Lecture 33 Ribbed slab design
- 07:11Lecture 34 Flat and solid slabs design and punching shear check
- 14:08Lecture 35 Isolated foundation design
- 05:22Lecture 36 Combined foundation design
- 03:31Lecture 37 Strip foundation design
- 05:13Lecture 38 Mat foundation design
- Preview01:50
- 04:36Advanced Tricks in ETABS to change the model.
- 05:42Advanced How to Draw L Shape column in ETABS with section designer
- 04:44Advanced How to draw Stairs in ETABS
- 13:30Advanced Design a swimming pool in ETABS
- 08:49Advanced P-delta check in ETABS
- 15:07Lecture 52: Advanced SAFE Design Piles foundation in ETABS, SAFE and ALLPILES
- 02:22Lecture 53 Advanced ASCE code earthquake definition
- 24:31Lecture 54: Advanced Nonlinear Pushover Analysis
- 04:46Lecture 55: Advanced Soft story check irregularity
- Preview14:01
- 20:03Lecture 57: Example 2 Design of a mosque: modeling in ETABS
- 16:33Lecture 58: Analysis and design of columns, slab and beams in ETABS SAFE and SAP
- 16:14Lecture 59: Example 2 Design of a mosque: Analysis and design of the Dome in SAP
- 33:23Lecture 60: Analysis and design of the minaret + foundation in ETABS and SAFE
- 04:59Lecture 61: Create report and detailing drawings in ETABS
- 07:14Lecture 62: Modeling fluid viscous dampers FVD to resist lateral loads in ETABS
- 06:11Lecture 63: Assign temperature loads to the building in ETABS
- 05:53Lecture 64:Eartquake system percentage for shear wall and dual system or MRF
- 04:54Merge two model ETABS in one file and show rendered view
- 00:50How to rate the course and put review
Instructor
![Ahmad Traboulsi](data:image/svg+xml,%3Csvg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 64 64"%3E%3C/svg%3E){kind=avatar}
- 4.4 Instructor Rating
- 547 Reviews
- 14,023 Students
- 9 Courses
Master degree graduated from City University of Tripoli in civil engineering program. Backed by successful internship experience and knowledge of engineering theories, principles, specifications and standards. I love teaching people and spreading knowledge. I have a big experience in civil engineer software mainly in ETABS and SAFE. I spent a long time working in these programs.