Juniper JNCIA-Junos (JN0-102) Full Pack

Name: Juniper JNCIA-Junos (JN0-102) Full Pack
Rating: 4.6 (257 reviews)

Learn Juniper from scratch

Created byPatris Koushesh

Last updated 10/2017

English

English [Auto],

What you'll learn

Be prepared for JNCIA-Junos JN0-102
Juniper novices could start their journey here

Course content

3 sections • 45 lectures • 6h 51m total length

Course Introduction2:56
Explore Juniper networks and prepare for the JNCIA-Junos (JN0-102) with a beginner guide to Juniper devices, Junos OS, basic configurations, routing, and firewall filters.
Juniper Networks Certification Program (JNCP)3:17
This lecture introduces the Juniper Networks certification program (JNCP) and its four levels—from associate to expert—highlighting a lab exam at expert level and tracks like service provider, enterprise, and security.

OSI & TCP/IP6:44
Data Encapslation and de-Encapsulation4:49
TCP & UDP14:23
Compare tcap and udp, showing tcap as a connection-oriented transport layer protocol with handshake, sequencing, acknowledgments, and flow control, while udp remains connectionless; both enable multiplexing using ports.
Common TCP/IP Protocols19:53
Ethernet Basics15:58
MAC7:04
IPv4 Basics18:06
There is a mistake in this video at minute 9 where I talk about public and private IP addresses. The subnet mask for 172.16.0.0 is /12 so it would be 255.240.0.0 which I have written 255.254.0.0 by mistake
IPv4 Subnetting10:23
IPv6 Basics12:10
Explore IPv6 basics, including 128-bit hexadecimal addresses, colon notation, header improvements, and global, unique local, link-local unicast types with transition tools.
Decimal to Binary Conversion9:50
Ethernet Devices History15:21
Explore Ethernet devices from bus topology to repeaters, hubs, bridges, switches, and routers. Learn how carrier sense with collision detection, collision domains, and broadcast domains shape network performance.

Introduction to Junos CLI17:55
How to emulate Juniper devices in GNS37:03
Introduction to Junos8:09
Introduction to Juniper Devices7:07
Introduction to Jweb Interface5:36
Junos Statement Hierarchy5:35
Operating Juniper Configuration9:28
Operating Juniper Configuration Part 28:15
Operating Juniper Configuration Part 317:06
Junos Basic Configurations Part 17:23
Junos Basic Configurations Part 210:55
Configure Juniper devices via SSH or Telnet, assign an IP to an interface, enable remote access, set login banners and idle timeouts, and define user classes.
Managing Configuration Rescue2:14
Managing Junos Interfaces12:35
Explore Junos interfaces across five types: management, internal, network, service, and loopback. Learn to configure physical and logical properties, assign IP addresses, and use dot notation for brevity.
Operating syslog8:25
Configure NTP on Junos6:39
Configuration Backup Automation6:02
SNMP Configuration8:06
Configure snmp on Junos devices to monitor with MIB objects and poll-and-response from an nms. Set read-only community, traps, and version 2 for secure monitoring and alerts.
Different show/monitor command8:31
Upgrading Junos OS7:01
Routing Basics7:10
Junos Routing Table Structure10:57
Static Route Configuation13:07
OSPF Basics6:56
OSPF Configuration10:10
Configure OSPF on Junos routers in area zero, enable interfaces, and apply passive on interfaces with no neighbors; verify convergence and routes with show commands.
Routing Policy Basics12:09
Routing Policy Configuration4:51
Firewall Filter Basics8:47
Explore how firewall filters act like access control lists, inspect each packet statelessly, apply named terms with match conditions and actions, and default to discard unmatched traffic.
Firewall Filter Configuration (Part 1)5:09
Configure a firewall filter as an access list to block ftp from the Windows 7 host (IP 192.168.56.40) and apply it on the interface for outgoing traffic, port 21.
Firewall Filter Configuration (Part 2)7:19
Authentication Configuration11:22
Authorization Configuration4:47
Run Jweb in GNS33:30

Requirements

There is no any prerequisite for this course all are covered in course
Other vendor experiences could be handy

Description

Juniper is leading company in many fields.It has a complete structure for training which is called Juniper Network Certification Program(JNCP). The starting point for all courses in this program is JNCIA-Junos because all of the basics of Juniper are covered here. In this course you will learn these basics and also become ready for the exam.

All contents are delivered in high quality video format and most of them have practical items.The videos are very handy and deliver the content in a reasonable time.

You will become ready for the exam and prepared for your long Juniper journey in 6 hours with this course.

In this course first we learn the basics of networking and then we learn how to operate with Juniper operating system which is called Junos. After that, we learn many basic and advanced configurations inside this OS.

If you want to take your first step in Juniper world strongly you could experience it with this course.

Who this course is for:

Students who wants to take Juniper JNCIA-Junos exam no JN0-102 could use this course for their success
This course is very useful for network administrators who wants to start their Juniper life

Juniper JNCIA-Junos (JN0-102) Full Pack

What you'll learn

Explore related topics

Course content

Course Introduction2 lectures • 6min

Networking Basics11 lectures • 2hr 15min

Starting Juniper32 lectures • 4hr 30min

Requirements

Description

Who this course is for: