Udemy Business

Teach on Udemy

Turn what you know into an opportunity and reach millions around the world.

Learn More

Your cart is empty.

Keep shopping

Industrial Automation and Electrical Board Basics with Plcs

Name: Industrial Automation and Electrical Board Basics with Plcs
Rating: 3.3 (22 reviews)

Learn Industrial Automation Basics and be able to Create Control Circuits for Your Powerful Machines with Plcs

Created byDerstagram Akademi

Last updated 7/2021

English

What you'll learn

Industrial Automation Basics
Industrial Automation Components
Electronic Basics
Asynchronous Motor Basics
Plc - Programmable Logic Controller Basics
Pneumatic Basics
Control Circuits Basics
GMT Plc Programming
Logic+ Plc Programming
FluidSim Software
EKTS Software
Schneider ATV12 VFD Basics
VFD Basics
Modbus Communication Basics

Course content

9 sections • 107 lectures • 8h 45m total length

Open - Closed Circuit and Short Circuit7:40
Students are going to learn that what is open circuit , closed circuit and short circuit at the end of this tutorial.
Voltage - Current - Resistor - Power - Ohm Law13:30
Students are going to learn that what is voltage , current , resistor and power at the end of this tutorial.
Resistor Connections and Important of Resistor9:27
Students are going to learn that what is resistor basics and importance of it at the end of this tutorial.
Analog Signal vs Digital Signal10:24
Students are going to learn that what is analog and digital signals and basics of them at the end of this tutorial.
Number Systems8:22
Students are going to learn that what is number systems at the end of this tutorial.
AC vs DC8:52
Students are going to learn that what is alternating current and direct current at the end of this tutorial.
Open Loop & Closed Loop5:45
Students are going to learn that what is open and closed loop at the end of this tutorial.
Number Systems - Introduction5:13
Students are going to learn that what is Number Systems.
Number Systems - Binary Numbers3:49
Students are going to learn that what is binary numbers.
Convert Decimal to Binary4:08
Students are going to learn that how to convert decimal number to binary number.
Number Systems - Octal5:12
Students are going to learn that what is octal in number systems.
Number Systems - Hex7:23
Students are going to learn that what is hex in number systems
Resistance of Conductor - How to Find ?10:07
Students are going to learn that how to find resistance of conductor.

Circuit Breaker and Button Basics8:46
Students are going to learn that what is circuit breaker and buttons at the end of this tutorial.
Contactor Basics8:18
Students are going to learn that what is contactor and usage of it at the end of this tutorial.
Motor Protection Switches Basics5:46
Students are going to learn that what is motor protection circuit at the end of this tutorial.
Power Supply Basics6:40
Students are going to learn that what is power supply at the end of this tutorial.
Limit Switches5:56
Students are going to learn that what is limit switches at the end of this tutorial.
Inductive Sensor Basics5:28
Students are going to learn that what is inductive sensors at the end of this tutorial.
Sensor Connections Basics Pnp - Npn7:37
Students are going to learn that what is npn/pnp sensor connections at the end of this tutorial.
Serial and Parallel Sensor Connections7:29
Students are going to learn that what is serial or parallel connection of sensors at the end of this tutorial.
Capacitive Sensors9:20
Students are going to learn that what is capacitive sensors at the end of this tutorial.
Ultrasonic Sensors4:55
Students are going to learn that what is ultrasonic sensors at the end of this tutorial.
Cyclinder Sensors(Reed Contacts)6:45
Students are going to learn that what is cylinder sensors at the end of this tutorial.
Optic Sensors + Laser Sensors7:16
Students are going to learn that what is optic and laser sensors at the end of this tutorial.
Relays8:54
Students are going to learn that what is relay at the end of this tutorial.
Thermostat4:36
Students are going to learn that what is thermostat at the end of this tutorial.
Signal Lamps4:54
Students are going to learn that what is signal lamp at the end of this tutorial.
Hardware Selection According to Asynchronous Motor3:43
Students are going to learn that how to select components according to motor at the end of this tutorial.
Encoder vs Resolver11:06
Students are going to learn that what is encoder and resolver at the end of this tutorial.

Synchronous Speed and Slip8:47
Students are going to learn that what is asynchronous motor , synchronous speed , slip etc. at the end of this tutorial.
Star and Delta Connection8:29
Students are going to learn that how to connect asynchronous motor star and delta at the end of this tutorial.
Monofaze Asynchronous Motor - Asynchronous Motor with Auxiliary Winding5:14
Students are going to learn that what is monofaze motor at the end of this tutorial.
Download Software - EKTS1:51
Students are going to learn that how to download EKTS software at the end of this tutorial.
Direct Driving2:26
Students are going to learn that how to direct driving motor at the end of this tutorial.
Driving with Button and Contactor4:45
Students are going to learn that how to driving motor with buttons and contactor at the end of this tutorial.
Latching & Unlatching Circuit of Motor4:15
Students are going to learn that how to latching and unlatching motor at the end of this tutorial.
Control Motor with Time Relay6:25
Students are going to learn that how to control motor with time relay at the end of this tutorial.
Star and Delta Connection and Running6:44
Students are going to learn that how to connect motor as start and delta and drive it at the end of this tutorial.
Small Motor Application5:11
Students are going to learn see small motor application at the end of this tutorial.

Question -10:05
Students are testing themselves at this section.
Answer -1
Students are testing themselves at this section.
Question -20:04
Students are testing themselves at this section.
Answer -2
Students are testing themselves at this section.
Question -30:08
Students are testing themselves at this section.
Answer -3
Students are testing themselves at this section.
Question -40:09
Students are testing themselves at this section.
Answer -4
Students are testing themselves at this section.
Question -50:12
Students are testing themselves at this section.
Answer -5
Students are testing themselves at this section.
Question -60:10
Students are testing themselves at this section.
Answer -6
Students are testing themselves at this section.
Question -70:07
Students are testing themselves at this section.
Answer -7
Students are testing themselves at this section.
Question -80:11
Students are testing themselves at this section.
Answer -8
Students are testing themselves at this section.
Question -90:04
Students are testing themselves at this section.
Answer -9
Students are testing themselves at this section.
Question - 100:12
Students are testing themselves at this section.
Answer -10
Students are testing themselves at this section.

Electrical Board Basics - 14:02
Students are going to learn Electrical boards basics and usages of components for electrical boards in this section.
Electrical Board Basics - 22:28
Students are going to learn Electrical boards basics and usages of components for electrical boards in this section.
Electrical Board Basics - 32:41
Students are going to learn Electrical boards basics and usages of components for electrical boards in this section.
Electrical Board Basics - 42:36
Students are going to learn Electrical boards basics and usages of components for electrical boards in this section.
Electrical Board Basics - 52:09
Students are going to learn Electrical boards basics and usages of components for electrical boards in this section.
Electrical Board Basics - 61:37
Students are going to learn Electrical boards basics and usages of components for electrical boards in this section.
Electrical Board Basics - 72:19
Students are going to learn Electrical boards basics and usages of components for electrical boards in this section.
Electrical Board Basics - 84:06
Students are going to learn Electrical boards basics and usages of components for electrical boards in this section.
Electrical Board Basics - 95:02
Students are going to learn Electrical boards basics and usages of components for electrical boards in this section.
Electrical Board Basics - 102:35
Students are going to learn Electrical boards basics and usages of components for electrical boards in this section.
Electrical Board Basics - 111:30
Students are going to learn Electrical boards basics and usages of components for electrical boards in this section.
Electrical Board Basics - 125:55
Students are going to learn Electrical boards basics and usages of components for electrical boards in this section.
Application Example -15:52
Students are going to learn Electrical boards basics and usages of components for electrical boards in this section.
Application Example -26:45
Students are going to learn Electrical boards basics and usages of components for electrical boards in this section.
Application Example -37:33
Students are going to learn Electrical boards basics and usages of components for electrical boards in this section.
Application Example -43:36
Students are going to learn Electrical boards basics and usages of components for electrical boards in this section.
Application Example -54:59
Students are going to learn Electrical boards basics and usages of components for electrical boards in this section.
Application Example -65:47
Students are going to learn Electrical boards basics and usages of components for electrical boards in this section.
Example From Real Machine7:31
Students are going to learn Electrical boards basics and usages of components for electrical boards in this section.

FluidSim Software Download0:06
Students are going to learn that how to download FluidSim Software at the end of this tutorial.
FluidSim Software - Simülation - First Application6:26
Students are going to learn that how use valves in fluidsim at the end of this tutorial.
Valve FW-BW Controlled with Button5:03
Students are going to learn that how use valves in fluidsim at the end of this tutorial.
Festo Pneumatic Applications Download0:08
Students are going to see that fluidsim pneumatic applications and how to download them at the end of this tutorial.

What is Plc ?7:48
Students are going to learn that what is plc at the end of this tutorial.
Download Logic+ Software3:57
Students are going to learn that how to download Logic+ software at the end of this tutorial.
First Simulation Application with Logic+ - Contacts and Coil6:25
Students are going to see that application examples in logic+ end of this tutorial.
Counter Example4:23
Students are going to see that application examples in logic+ end of this tutorial.
SR-RS Example4:11
Students are going to see that application examples in logic+ end of this tutorial.

Download GMT Software1:43
Students are going to see that how to download GMT plc software end of this tutorial.
Plc Logic Instructions9:23
Students are going to learn that how to use logic instructions in GMT plc end of this tutorial.
Math Instructions9:22
Students are going to learn that how to use math instructions in GMT plc end of this tutorial.
Comparison Instructions4:51
Students are going to learn that how to use compare instructions in GMT plc end of this tutorial.
Timer Instructions6:07
Students are going to learn that how to use timer instructions in GMT plc end of this tutorial.
Counters6:05
Students are going to learn that how to use counter instructions in GMT plc end of this tutorial.

Introduction to ATV12 VFD4:22
Students are going to learn that basics of atv12 vfd and introduce with it.
Technical Information about ATV127:15
Students are going to learn that technical informations about atv12 vfd.
Control VFD with Button and Potentiometer and Small Application Test7:34
Students are going to learn that how to control vfd with button and potentiometer.
Disactivate OPF2 Error for Test VFD without Motor6:47
Students are going to learn that how to disactivate OPF2 error for test vfd without motor
2-Wire and 3-Wire Connection of VFD11:00
Students are going to learn that how to use 2-wire or 3-wire connection of Schneider vfd
Maximum and Minimum Frequency Adaptation of VFD5:34
Students are going to learn that how to adapt max and min frequency.
How to Adapt Acceleration and Deceleration Time of VFD5:40
Students are going to learn that how to adapt max and min frequency.
Analog Input Adaptation via Parameter4:24
Students are going to learn that how to adapt analog input parameter.
Relay Output Usage of VFD4:46
Students are going to learn that how to use relay output of vfd.
Modbus(RS-485) Comm. Parameters Adaptation8:28
Students are going to learn that how to adapt rs485 communication parameter of atv12.
PLC - ATV12 Modbus Communication Example22:53
Students are going to see that how to communicate with Schneider vfd via plc application in this section.
Download Files0:03
Students can download tutorial file in this tutorial.
SOMove Software8:39
Students are going to learn that how to use somove software and how to use it .

Requirements

This course does not require any prior knowledge.

Description

Dear Students ;

You are going to learn Industrial Automation Basics with this course.

As Derstagram Akademi , we decided to create this powerful and helpful course in udemy after 6 course.

You are going to learn electronic basics in the beginning.So you are going to understand what are basics of components and how to control circuit algorithms.

Then you are going to learn industrial automation components and theirs usages.

And also you are going to learn pneumatic basics at the end of course.

With plc section you are going to learn plc basics also.

Plc - Programmable Logic Controller and it's control basics are really important for all of us.

And at the end of course, you are going to be able create powerful control algorithms and circuits for plcs.

If you want to create an electrical boxes powerfully and efficiently, you need to know which material that you need to use and also how to cabling these materials.

Also , you need to know how to give a power to them.

You can write a plc logic but you need to know that how this plc program controlling hardwares for machines.

You need to create a programs for equippments that you are using.

So, this course created for your needs in the automation field.

And this course created by us who preparing and finishing automation projects each time.

I mean , you can learn whole professional techniques from us with this course.

At the end of this course , you are going to get this talents ;

- Industrial Automation Basics

- Industrial Automation Components

- Electronic Basics

- Asynchronous Motors

- Plc Control Circuit Basics

- Pneumatic Basics

- Control Circuit Basics

- GMT Plc Programming Basics

- Logic+ Plc Programming Basics

- EKTS Software

- Electrical Boards

- FluidSim Software

And a little bit more ..

You need to keep following us and also you need to learn always from us.

Mustafa

Who this course is for:

Anyone who wants to learn industrial automation basics
Anyone who wants to do a carier automation engineering or industrial automation
Anyone who wants to create own electrical box and own plc programs
Anyone who wants to create own control circuits and control electronic hardwares
Anyone who wants to control machines
Anyone who wants to do complete automation projects.

Industrial Automation and Electrical Board Basics with Plcs

What you'll learn

Explore related topics

Course content

Electronic Basics13 lectures • 1hr 40min

Industrial Equipment17 lectures • 1hr 57min

Asynchronous Motors10 lectures • 54min

Questions and Answers20 lectures • 1min

Electrical Board Basics to Advanced19 lectures • 1hr 19min

Pneumatic4 lectures • 12min

PLC Basics and Logic+ Software5 lectures • 27min

GMT Plc Programming and Software6 lectures • 38min

Schneider ATV Series VFD Basics13 lectures • 1hr 37min

Requirements

Description

Who this course is for: