
VideoJoe will show you what he will be doing in order to paint some doors. Now pretty much any DIY beginner could paint their doors. Yes it will require some effort & patience for sure...& a little know how so why not take a chance on yourself & sign up for this course? For the price of this course maybe you can do without one extra large pizza & invest that money to purchase this video course! 3 hours of video for how to paint my doors? Well worth it...at least that is what I am hoping you say. Take a chance on you!
You will learn all kinds of things in regard to painting your interior wood doors. Have you ever heard it's all in the prep? Well that pretty much came from painters I think. They are right too. If you decide to paint your doors then you will need to do half your work in the prep before you even get the paint bucket out.
Whenever VideoJoe paints some doors, he removes the doors from the different rooms & takes them down to a garage where he will then set up everything in order for the doors to be painted. Of course you will have to clean the doors too & before VideoJoe removes the doors he will give them a good clean & also remove the door handle unit as well as the door stop. Now he's ready to remove pop the hinge pin & remove the door(s) & take them to the garage.
Yes like I say you will learn a lot if you decide to sign up for this video course & I sure hope you do. You will receive step by step directions & VideoJoe will be here all the way through guiding you for what to do first second third, etc..
Just so you know...VideoJoe is not a professional painter & he really doesn't like to paint...but that doesn't stop him from painting doors & making them look like they were pretty much brand new after re-installing & that's why I think you would be in good hands learning from an average Joe.
He will give you his take for all the things he does in order to paint doors & it is my belief that each step you see, you will come to the conclusion that it really looks doable to paint your doors. At least that is my hope.
Come join me!
In this episode VideoJoe will show you how he sets up his door in a garage & how he starts sanding on a door. Of course before sanding on any doors you will want to give the door a good clean & VideoJoe generally uses simple green & cleans a door prior to removing a door from it's door location in the house.
If you forget then just remember to give each door a good cleaning down in the garage. I say the garage because VideoJoe never ever paints a door in place in the house. I would not recommend leaving the door hardware on a door before painting. You will never get as good of a paint job on your doors if you paint them in place. That's why VideoJoe goes the extra mile removing the doors & removing all the door hardware & setting up doors to be painted in a garage area.
VideoJoe will do the sanding in two phases & each phase is simple but also important. You will learn the first phase of sanding a door on this video.
VideoJoe will now show you how he goes about the second phase of sanding a door. He's going to use a hand paddle sander & you can get them at most hardware stores in the drywall area. This paddle hand sander is mainly used for sanding drywall but you can also use for sanding doors.
You will see how easy it is to sand the main surface flat area of doors using a paddle hand sander. You will learn the proper directions to sand with a paddle sander & then go from the paddle sander on to sanding by hand in nooks & crannies.
What you are doing when sanding doors is you are lightly etching the existing paint on a door that will be re-painted. These little etch marks will help the new paint stick to the door better than not sanding the doors at all for example.
You really don't want to just put paint on a door without sanding the door first. Yes this will take some time to sand your doors especially if you have 12 to 15 doors to sand before painting. Don't forget to flip the doors & sand both sides.
VideoJoe is still sanding doors on this video. I can't stress enough too to use a construction light fixture when you are sanding doors. Especially if you are sanding doors in a garage. Even if you think there is enough light for you to see, you will be amazed at what happens once you put a construction light to a door you thought you had just sanded enough.
Now's the time to carefully inspect around the door edges for previous built up paint & marks or slight gouges or imperfections you happen to see on your doors. Now is the time to find those & decide what to do to see if you can soften the marks or scraping some of the excess paint buildup at door edges to then sand & make less noticeable since once you apply paint, the paint will make those areas stick out like a sore thumb & then it's too late for you to do anything.
VideoJoe also likes to run his hand down the edges of the doors & it might surprise you for what you feel. Sometimes the edges could feel sharp so now is the time to do a bit of sanding down an edge uses the paddle sander & blinding in & rounded off the corner just a bit so when you run your hand down, it feels smooth.
You will soon see why I say "it's all in the prep". It's amazing what all you will find on your doors prior to painting. You also have to remember like when was the last time your doors were painted...if at all? That's why you have decided to paint the doors because they probably look old & tired so the more careful you are when cleaning & sanding your doors, the better your doors will look after painting.
It's also important to realize you only want to sand so much on your doors as the existing surface still needs to even out. If you find a little mark or gouge you want to blend in the gouge area or blend in the painted area to the gouge or mark so you don't have an indentation mark after you paint...as you will see it.
Now if there are a few areas where you think you have to sand more than everywhere else & you end up sanding all the way down to bard wood then sand & blend the bare wood area up into the painted area & know that when you apply paint you might want to look at all your doors & spot prime or spot paint those deeper impressions then let that paint dry then lightly sand & blend in prior to painting the entire door surface...I know!
How good your doors will turn out after all your painting gets done will be determined by how well you did with the door prep before any new paint ever touches your doors.
It's now important to have a game plan for re-painting your doors. VideoJoe will give you some important tips for things you should start thinking about prior to applying any paint. In VideoJoe's case he will be using the garage for painting his doors so now he will need to wipe down the doors again to get rid of all the dust from the sanding.
After that he will move the doors to get them out of the way so he can now sweep up all the dust in the garage to get ready for setting up the doors again & this time to do the actual painting. But wait...there are still a few more steps before setting up the doors...still? Yes.
Once the garage is fully swept up VideoJoe will now take what he calls kraft paper & roll out down on the garage floor all along the walls where he will be setting up his doors. Kraft paper is also called roisin paper or building paper & you can get it at most hardware stores.
This kraft paper is 3 feet wide & not sure how long a roll is & you won't need that much out of the roll to set up your doors but kraft paper is always a good thing to have around for all kinds of DIY projects. In fact VideoJoe always keeps some around & he has some in his garage as we speak!
OK time to finish sanding your doors. Do a good job now & don't forget to wipe down the doors when you get done & sweep up after that.
Now VideoJoe has a decision to make. In the Condo there is a door between the Condo & the garage that he has not taken down yet as this door has a deadbolt on it keeping the Condo locked up since this Condo was just purchased & needs to stay locked. It's the winter time too so this door is keeping the Condo warmer than not having this door in place.
VideoJoe will discuss with you his thoughts for how he will tackle painting this particular door because he really doesn't like to paint doors in place for the reasons explained prior.
You may have a decision such as this for your door painting project. I know I see you rolling your eyes because this particular door is a solid core heavy door with spring loaded hinges on it as well as a door bottom sweep & door handle not to mention a deadbolt too. There's lots of work re-painting the door between your house & garage.
Here's what you have to consider...when you paint doors, generally new doors will be painted a semi-gloss like paint & it may take 3 to 4 days for your doors to cure & dry out enough for you to handle the doors to move the doors back into the house & stack against the wall as well as muscling the solid core door between the house & garage to re-install since it's so heavy.
The solid core door is going to be heavy & you will have to grab it with your fingers in order to lift & remount to the existing door jamb. If you have two spring loaded door hinges that are on that door, then how are you going to lift this door up into place to install? Hmmmm. Like I say a few things for you to think about especially if you are planning on doing all the work on your own.
Watch this video & formulate a game plan.
VideoJoe will now show you how he gets his doors ready to be painted out in a garage.
What you have to think about is how are you going to be painting the bottom edge of a door right down tight to the garage floor that is covered with kraft paper? You will learn just what to do on this video.
You will also see that when you get the doors painted & all done, how long do you think it should be before you can install the doors back into the house? Most doors get painted with semi-gloss paint & it's really a good idea not to install your doors the very next day as the semi-gloss paint should cure all the way.
Your doors will be dry to the touch the very same day or the very next morning but that doesn't mean you should handle the doors the next day. Your paint needs to be cured all the way as the paint could still be curing under the top dry bit that you can feel. The last thing you want to do is handle the doors too soon & get your fingerprints etched right into the paint or a smudge or anything like that.
If you have the time it would be best to just let your doors sit for a few doors or more prior to re-installing your doors. I can't tell you how many times I've seen VideoJoe remove a door handle to a door & when the mounting screws were removed, the door handle was still attached to the door because it was stuck to the paint because the installers installed the doors too soon & the door handle got installed before the paint was all the way cured.
In this case if you have a door handle that is stuck you don't want to just grab it & try to rip it off a door as you could lift the wood surface of your door off beyond where the door handle trim is attached to the door. Now you have a door repair issue!
Yes this video is an important part of your painting project!
Nice! This video will show you how VideoJoe sets up the doors ready for painting to begin. Now this kraft paper is 3 feet wide so you should have enough room beyond the doors to be able to get all your painting done with one piece of kraft paper up against the wall.
The other good thing is if you happen to spit/spill any paint on the kraft paper you will see the paint spill so you won't walk on it & you can wipe it up & see it unlike a painter's drop cloth. VideoJoe will give you good ideas for what else you can do with this kraft paper!
As for setting up the doors you may have had this question building up in your mind...how do I paint the bottom edge of my doors down next to the kraft paper? Also will the new paint stick from the bottom of the doors & stick to the kraft paper? No.
VideoJoe has an ingenious way for how he sets up the doors to paint the bottom edge of the doors. If you are reading this & already saw that on the last video...great! If you are reading this for the first time please go back & watch the previous video! You will learn more than what you know now!
VideoJoe will also go over the painting tools he will be using to paint the doors & it might amaze you! Once you see this video a light bulb may turn on in your head like an ah ha moment because I think you might have just realized that VideoJoe hasn't shown you anything you think you can't do!
VideoJoe is almost ready to start painting the doors but one more video for him to go over a few more important things you might want to consider before opening up the paint.
Do you have enough lighting? Do you have everything set up before you start your painting? The last thing VideoJoe hates is not being ready to start painting because once he gets into the paint he doesn't like to jump back & forth doing some other things he forgot to do before starting to paint.
When you start painting using semi-gloss paint you will know the things VideoJoe is referring to because once you start painting the doors you don't want to stop & start anymore than you have to.
Another question...do you have any old clothes you can use before starting to paint? You might laugh but when VideoJoe gets ready to paint he likes to use the same clothes he used the last time he painted if you know what I mean. Get some grubbies! You could even put your shirt inside out if you have to.
In VideoJoe's case winter is upon him so he has 14 doors to paint & it's getting into day so he needs to ask himself if he thinks he can finish painting all the doors in one day or if he needs to stop. He hates cleaning up just to get everything out again the next day especially if he can stay later than normal to finish painting all the doors in one day.
You'll have to decide...
Now are your doors all set up with just enough clearance between each door to be able to paint all the doors where you have placed them? Yes this video is a good one too.
See what I mean about it's all in the prep? This video is Part 9 & just now ready to start showing you how to paint!
VideoJoe will be showing you how to go about painting now because you may need a paint brush even though most of the painting will be done using a mini roller. If you have door insets like VideoJoe's doors then you will need to use a paint brush for the first part of applying the paint.
The important thing to realize is when you apply semi-gloss with a paint brush to door insets, then you really need to pay attention on how much paint you apply & wipe off. You will think you have all the painted insets done & not realize that when the paint settles on there just a few minutes it may have a tendency to run when you least expect it too.
If any paint does run if you see it in time then you will be able to fix it but if you wait too long then the semi-gloss top surface will skin up making it difficult to blend that paint back in.
You'll see the little handy paint pail he carries around to paint the door inserts & you'll know you should get one.
Now take a look at your handy work with painting the door inserts. Are there any paint runs at the bottom edges of the door inserts? You can fix them now. I would also suggest now painting the rest of the door surfaces the same time just after you get done with painting the inserts since the surrounding paint you just got on the main flat surface of your doors is wet will blend in properly when you start painting the doors with the mini roller.
If you wait until the next day you may have to light sand those areas where your paint landed on the flat surface so as not to see those areas after you get done applying the paint next day with a paint roller because now you will have two coats of new paint in those areas per se. That's why when VideoJoe paints doors he likes to finish all the painting in one day.
Now is the time where the metal hits the road. Once you think you're done with the paint brush, go back & look at everything to see if there are any small run areas so you can take care of these areas prior to being done with the paint brush.
OK now it's time to use the mini roller like VideoJoe will show & explain to you. You paint the entire door on one side using the mini roller. Paint one side of the face of a door only. Now you can paint all of your doors the one side only using a mini roller with an extension.
Now you can flip the doors around when the doors are just dry to the touch & do this carefully. The doors usually don't take that long to dry to the touch & if you have 10 to 14 doors to paint then if you paint the doors from left to right or right to left you can now start flipping the doors since the first doors you painted should be dry enough to the touch to turn.
If you want to wait a few minutes for a quick break to let the doors dry a bit more now is the time.
Now you can flip all the doors & then it will be time to use the mini roller to paint the side door edges before painting the door fronts...see? Watch the video!
You will see how to finish off the door edges using the paint roller making sure you finish off both corners of each door edge so you don't have a buildup off paint on the door edge on the back side where you just flipped the doors around.
You will now see how video goes uses the mini paint roller & you will see hey that looks pretty easy...I can do this!
Make sure to paint all the side door edges before now painting the surface of the 2nd face of the doors.
For a review....you first painted the door inserts on one side of all the doors. Even while those inserts were still drying you flipped all the doors & painted all the inserts on the other side of the doors. You used the paint brush for painting all the door inserts & you blended in the paint on the surface of the doors. You've now done both sides & have checked for paint runs. You are now done with the paint brush.
You now have the mini roller ready. You can now paint all the face of the doors on one side & you let that side dry to the touch will only be a few minutes. Now you can gently flip the doors again. Now is the time to paint the side edges of the doors using the same mini roller.
Now you can finish off painting the door faces on the second side which is facing you. Haha kind of hard to explain the entire process but if you watch the entire video series in order you will see all the steps VideoJoe will show you.
On this video you will see VideoJoe using the mini roller using an extension pole which is just a broom handle. VideoJoe will show you just how easy it is using a mini roller with an extension pole. There is no need to use a bigger mini roller than what is shown & no longer either if you follow the steps VideoJoe will show you.
To me it kind of looks like VideoJoe is having fun painting these doors!
This now ends this video course...I know! Once you watch the entire video course you will see that VideoJoe has pretty much shown you everything you should need to know in order for you to paint your doors. You can always review these videos more than one time since there is over 3 hours of video content here so you really think you can remember all three hours of what you watched before thinking you can now paint your doors?
Review this video course a few times so will get the meat & potatoes for how to paint your doors. It is my belief that you can now paint your doors & make them look just as good as VideoJoe's doors.
Happy painting!
See you next time...
This video course is what you could be looking for if you are needing your doors painted & you're not quite sure of all the required steps for you to be able to paint the doors yourself so you can save money.
When I say paint the doors yourself I also am referring to that once you get done painting the doors, they will look like a professional painter painted them & not you.
VideoJoe will show you step by step what he does in order to prep doors by sanding the doors & he will also show you a great way for setting up the doors in order for the doors to be painted nice & easy.
You will learn some tips for painting doors that you may never have thought of & you won't have to spend much money for the tools needed in order to get those doors looking nice & ready for re-install!
Yes I am referring to the fact that you will not be painting your doors in place on the hinges with the door hardware on there either. The best way to paint doors is to remove all the door hardware & get the doors back to raw slabs so you can work on them in your garage.
Is VideoJoe a professional painter? No...but that won't stop him from making his doors look like a professional painter painted them when he gets done. That's what you need...an average Joe (VideoJoe) showing you how to paint your doors. Any DIY 9do it yourself) beginner can paint their doors as that's who VideoJoe wants to teach...the DIY beginners! Are you one? Then you will love this video course.
VideoJoe will take you step by step through the entire process for getting your doors re-painted & looking like new again.
I hope to see you sign up for this video course!