Huawei HCIA R&S All Labs

Configure static routing on Huawei routers across a three-router topology, set static routes for the other networks, and validate connectivity by pinging PC 2 from PC 1.

Configure ospfv3 on Huawei routers, enable ipv6, set router IDs, add interfaces to area 0 with auto ipv6 addresses, and verify with ipv6 ping and display commands.

Configure Huawei routers for a single-area OSPFv2, assign router IDs, create area 0, add networks and interfaces, verify with display ospf routing, and test connectivity via pings.

configure ripng on all Huawei routers to enable IPv6 routing, verify using display ripng 1 and protocol ripng, and test connectivity with IPv6 ping across interfaces.

Configure a Huawei router as a DHCP server with a global IP pool ABC and an interface pool, assigning PC1 to the global pool and PC2 to the interface pool.

Configure link aggregation on Huawei switches by creating an eth trunk and adding three interfaces to form a single aggregated link, then verify the logical interface and ports are up.

Configure vlan 2 and vlan 3 on Huawei switches, sales and engineering descriptions, set access ports, configure a trunk with allowed vlans 2 and 3, save and verify with ping.

Configure vlan 2 and vlan 3 on Huawei switches, assign access ports and a trunk port with allowed vlans, then verify connectivity with ping tests.

Configure serial interfaces on Huawei routers with HDLC as the WAN protocol, assign IP addresses, enable HDLC on both ends, and verify using display interface and HDLC statistics.

configure ppp with pap authentication on huawei routers, enable aaa, create the router 2 user on router 1, enable ppp and pap on both routers, and verify with display interface.

Enable aaa, create local and CHAP users, and enable PPP on serial interfaces. Configure CHAP authentication on Huawei routers and verify with display current configuration | begin ppp.

Configure a local user on Huawei devices with privilege, service type, idle timeout; define authentication abc and authorization xyz for domain gokhan; verify with display aaa configuration.

Configure GRE tunnels on Huawei routers by creating a tunnel interface, assigning logical IPs, configuring GRE, and setting source and destination with static routes; verify connectivity.

Configure port security on a Huawei switch, set max three MAC addresses with sticky MAC, and apply protect, restrict, or shutdown actions in a four-PC topology.

Configure SNMPv3 on Huawei routers by creating the SNMP agent, setting system info (contact, Istanbul, Turkey), forming an Admins group and user, and enabling traps.