
Steel is not one product but a family of products whose value comes from what they are made of and what they are made for, and the industry exists because iron ore and coal are abundant while the capability to convert them into consistent, certified metal is not.
- What the steel industry actually sells
- From rock and coal to a certified tonne
- Two routes make almost all the world's steel
- Three figures that describe a steel business
- Two ways to make a tonne
- From ore price to margin
- Where the numbers come from
- Where each steel product sits
- The mix shifts, the total barely moves
- Flat and long are different businesses
- Everything is divided by tonnes
- What this lesson established
There are two distinct steelmaking business models, integrated blast-furnace/basic-oxygen and electric-arc-furnace, and they must be taught separately because their cost stacks, flexibility, and capital intensity are fundamentally different.
- The two ways steel is made
- Ore and coal, or scrap and power
- BOF still makes most of the world's steel
- Two formulas, not two price levels
- Same metal, opposite cost behaviour
- How each route turns input into coil
- How each model reacts to a change
- Where each route sits on cost and flexibility
- What each route spends its money on
- The two cost stacks, defined
- A company can be one, the other, or both
- What this lesson established
Steelmaking exists because the world needs a cheap, strong, recyclable structural material at scale, and the industry's balance sheet reflects the enormous fixed capital required to make that material continuously.
- Why the industry exists at all
- Where steel goes
- Two routes, one industry
- The weight of the asset base
- How spreads are calculated
- From ore to invoice
- How an investment cycle moves steel demand
- What heavy capital does to a business
- Two routes, one product
- The formulas behind the spread
- The balance sheet as a constraint
- What this lesson established
An integrated mill's cost per tonne is dominated by iron ore and coking coal, so its profitability is a direct function of the spread between steel prices and those inputs.
- Integrated mills and the cost of ore
- Two routes, one global split
- The spread formula, drawn as a bar
- Three figures that frame the model
- Advantage or stranded asset
- How the contract lag reaches the mill
- Why the furnace stays lit
- Captive ore: advantage or anchor
- Where the cost per tonne sits
- Two routes, two cost drivers
- Cleveland-Cliffs: the model in one company
- What this lesson established
An EAF mill's cost per tonne is dominated by ferrous scrap, electricity, and electrodes, so its profitability is a metal margin, not a spread, and its flexibility is its defining economic feature.
- EAF mills and the cost of scrap
- Scrap is the primary input, and it is regional
- Global crude steel production by process route
- Three figures that frame the EAF cost stack
- Two cost stacks, two formulas
- How scrap becomes steel
- One day inside an EAF mill
- Where each EAF producer sits
- The three dominant costs, schematically
- Two cost stacks, two formulas
- Start, stop, restart
- What this lesson established
Flat steel products, especially coated and painted steel, earn a premium because they solve corrosion and appearance problems for construction and appliance customers, and that premium is a different business from commodity hot-rolled coil.
- Flat products and the coated steel premium
- Three products, one starting point
- How the world makes steel
- How mix shows up in the numbers
- Commodity coil against coated product
- From slab to coated coil
- Two routes to the same flat coil
- Where each flat product sits
- Mix shifts change the average before the total does
- The same flat segment, three producers
- What coating actually buys
- What this lesson covered
Long steel products, especially rebar, are tied directly to construction activity, and their economics are driven by local demand, scrap costs, and freight barriers that protect regional markets.
- Long products and the construction cycle
- Four shapes, one destination
- Most steel is still made from iron ore
- Same product, different geography
- Why long products trade close to home
- Scrap to rebar in four steps
- How construction demand arrives
- Where long products compete
- How the world makes steel
- Two long-product producers, two footprints
- What actually moves long-product demand
- What this lesson established
Tubular products and downstream fabrication turn commodity steel into differentiated, customer-specific products, and they earn different margins than the upstream mills that supply them.
- Tubular and downstream fabrication
- Commodity tonnes versus specified tonnes
- Where a fabricated part's cost sits
- Three figures that describe the chain
- Two ways to read a downstream business
- Scrap to finished tube
- From drawing to delivery
- Who buys tubular product, and what they need
- Where the money sits in a fabricated order
- Mills that also sell downstream
- Volume tells you one thing, mix tells you another
- Tubular and downstream, in five lines
The steel spread, calculated as HRC price minus 1.5 tonnes of iron ore fines and 0.71 tonnes of hard coking coal, is the industry's equivalent of a bank's net interest margin and the single most important number for understanding integrated steelmaker profitability.
- The spread is the industry's real margin
- What the spread subtracts
- The spread is what is left
- Why the spread applies to integrated mills
- Integrated versus EAF
- Three prices, one spread
- Why the spread lags the spot market
- What moves the spread, and who feels it
- The cost stack inside one tonne of coil
- Two routes, two cost stacks
- Why 1.5 and 0.71
- What this lesson covered
Production is a volume of tonnes made in a period, while capacity utilisation is production divided by what the plants could have made, and confusing the two leads outsiders to misread bullish signals.
- Production and capacity utilisation are different
- A ratio, not a tonnage
- Two lines that can move apart
- Three numbers that anchor the lesson
- The two measures, side by side
- Measuring output, then capacity
- What you can get for free
- Four readings of one tonnage rise
- The mix moves before the total does
- Three utilisation definitions in circulation
- What you can get for free
- What this lesson established
Shipments are tonnes actually despatched to customers and reconcile to revenue, while product mix determines the average realised price because flat and long products have different customers and pricing.
- Shipments and product mix
- Revenue is tonnes times realised price
- US steel shipments move month to month
- Three sources, three access rules
- Flat and long serve different customers
- How an order becomes a shipment
- How shipment data reaches you
- Where each product line sits on price and volume
- Mix shift moves the average price before the total does
- What each source gives you and what it costs
- Shipments reconcile to revenue, mix explains the price
- What this lesson established
ROIC measures operating profit per dollar of long-term capital tied up in the business, and it beats ROE in steel because ROE rises with borrowing or buybacks that do nothing to improve the plants.
- Return on invested capital beats ROE
- Profit per dollar of capital
- Same profit, two different denominators
- Three figures, all from filings
- What each measure sees
- From EBIT to invested capital
- How the cycle moves ROIC
- Where the two measures diverge
- Same operating profit, different capital mix
- Where each input comes from
- What the number has to clear
- What this lesson covered
The ratio of capital expenditure to depreciation reveals whether a steelmaker is maintaining, growing, or quietly harvesting its asset base, and it is the single most informative number for judging future earnings power.
- Capex to depreciation tells the real story
- Capex divided by depreciation
- Two lines, one story
- Three figures to anchor the ratio
- Two ways to report free cash flow
- Getting the ratio in four steps
- How the ratio moves through a build
- Four positions on the same ratio
- Where the capex dollar goes
- Two inputs, one ratio
- The ratio needs the spread beside it
- What this lesson established
Net debt divided by earnings is only meaningful when tested at the bottom of the cycle, because steel EBITDA can halve in 18 months, so the metric to teach is the ratio at the trough and how much debt is due before recovery.
- Net debt through the cycle
- What net debt over EBITDA actually measures
- How the ratio behaves when earnings halve
- Three quantities behind the earnings line
- Same ratio, different currencies, different accounting
- How to read net debt through a cycle
- The order in which the cycle tests a balance sheet
- What the ratio hides at the peak and reveals at the trough
- Where a steelmaker's EBITDA actually goes
- What each disclosure basis changes
- The ratio is only half the question
- What this lesson established
Steel data comes from a mix of free public sources and paid private benchmarks, and knowing which is which prevents outsiders from faking a measured value or missing a free anchor.
- Where the numbers come from
- Free anchors and paid benchmarks
- Global crude steel by process route
- Three free sources worth bookmarking
- Free tier against paid tier
- Four steps to a usable number
- The published steel spread, step by step
- What each source gives you
- How worldsteel splits crude steel
- Free quantity sources
- No free HRC transaction price
- What this lesson covered
Steel accounting choices, from depreciation schedules to adjusted EBITDA definitions and inventory costing, can materially distort comparisons between companies and across cycles.
- How accounting distorts steel numbers
- Why steel is unusually exposed to accounting choice
- The ratio that tells you which way the estimate is leaning
- The formulas that survive a policy change
- FIFO against weighted average when input prices move
- Where the ratio's inputs come from
- A reading order for the numbers
- Four choices that move the numbers
- Illustrative: how FIFO and weighted average diverge
- Three adjustments, three effects
- The spread formula and the free prices behind it
- What this lesson covered
Nucor and Cleveland-Cliffs represent opposite cost stacks, EAF versus integrated, and comparing them shows how the same steel price produces different profitability depending on input exposure.
- Nucor and Cleveland-Cliffs compared
- Scrap in, or ore in
- BOF and EAF, share of world crude steel
- What one ton of integrated steel consumes
- Two cost stacks, two margin formulas
- How an ore move reaches a mill
- Why a spot move is not a result
- Where each cost sits
- What a ton of coil is made of
- The two formulas
- One commodity, two directions
- What this lesson covered
Outsiders misread steel because they confuse lagged and spot spreads, contract and spot pricing, production and utilisation, miners and steelmakers, and maintenance and growth capex.
- Traps an outsider falls into
- The spread is a formula, not a quote
- Input cost and selling price move on different clocks
- Three figures that define the utilisation trap
- Miners and steelmakers are not the same bet
- How a spot quote becomes revenue
- The order the traps spring in
- Where the capex is going
- Production can rise while utilisation falls
- Same commodity, opposite sign
- Tariffs and duties move the spread by rule
- What this lesson covered
Steel is structurally unlike other industries because its economics are politically set through tariffs and subsidies, its assets are slow to idle, its products are globally traded but regionally priced, and its cycles are driven by investment rather than consumption.
- Steel Is Structurally Different
- The world makes steel two ways
- Global crude steel production by route
- Three figures that set the frame
- Flat steel and long steel behave differently
- How a duty becomes a price
- Why steel supply moves slowly
- Where steel demand actually comes from
- The mix of demand shifts before the total does
- Two routes, two cost structures
- Globally traded, regionally priced
- What this lesson established
This course contains the use of artificial intelligence.
How Steel Actually Works is a short course for people who work in or follow finance and want to read the steel industry the way an analyst does, without having done the job. It assumes no prior banking or finance knowledge and builds the industry from the ground up, in plain language, over twenty lessons.
The course starts with what steelmakers actually sell and the two routes that make almost all of the world's steel: the integrated blast furnace and basic oxygen furnace, and the electric arc furnace. From there it works through the products, flat and long and tubular, and shows why flat and long are different businesses with different customers and different pricing. The middle of the course is about the numbers. You will learn how the HRC spread is calculated from iron ore and coking coal, why an electric arc furnace producer measures a metal margin over scrap instead, and why production and capacity utilisation are not the same measurement.
The later lessons cover the judgement calls: why return on invested capital beats return on equity in this industry, what the ratio of capital expenditure to depreciation tells you about a mill's asset base, how to read net debt through a cycle rather than at the peak, and how accounting choices distort comparisons between companies. The course closes with a direct comparison of two producers with opposite cost stacks and a review of the traps outsiders fall into.
Each lesson is a short video with slides. By the end you will be able to open a steelmaker's filings, find the inputs that matter, calculate the spread or the metal margin yourself, and explain in your own words why the same steel price produces different profitability at different companies.