G4 - Smart home Tutorials.

Discover how magnetic relays use a coil to switch circuits, enabling a smart Zaarly device to control lighting, circuits, gates, and motors, with interlock and multi-channel options.

Learn how infrared transmitters and receivers work in remote controls, including how codes are stored, assigned to buttons, and used in macros to control TVs and other devices.

Discover how the Smarthome sound system plays your favorite music by connecting memory cards, radio antennas, and TV or DVD sources, with speaker options and a receiver or control-based setup.

Learn to program a curtain using relays and a channel, set open and close actions for a window covering, and use stop and remote control to adjust timing.

Configure cooling and heating ranges on the ddp, setting cooling between 19 and 27 degrees and heating between 24 and 30 degrees to protect kids and maintain comfort.

Explore button mode in smart home controls, comparing on/off operations with dimming options, and see how mechanical versus dimming states influence switch behavior and reprogramming options.

Learn to locate and register the 9 in 1 sensor, calibrate temperature readings, monitor lux brightness, and configure motion sensitivity and departure time to control lighting.

Learn how a 9 in 1 sensor example uses lux readings to control light brightness and switch lights on or off, with a singleton lighting controller and 100-300 lux thresholds.

Explore how to enable and disable sources in zone audio, add or remove sources, tune channels and frequencies, and test volume and antenna setup.

Arrange your smart home data in organized tables for lighting, climate controllers, media devices, sensors, and sockets, using device IDs and control types to simplify programming for later use.