FMEA 5° Edition - Training in English

FMEA 5° Edition

Created bySAM: Sinergy, Assurance, Management Consultoria Empresarial Ltda.

Last updated 11/2023

English

What you'll learn

This is the professional responsible for managing the projects that are under development in your company. Thus, he manages and controls the project teams.
Project estimating is the process of estimating the time, cost, and resources needed to complete a project.
Risk management is the process of identifying, analyzing and controlling (or minimizing) business risks. It is about systematically evaluating the uncertainties
Project risk management is one of the PMBOK's areas of knowledge, fundamental to the success of the project's objectives.

Course content

1 section • 8 lectures • 2h 33m total length

FMEA 5° EDITION - Link between Quality Cost & new FMEA - Introduction & Part 120:20
FMEA 5° EDITION - Part 2 - New FMEA Main changes22:21
FMEA 5° EDITION - Part 3 - Priority Action explained22:19
FMEA 5° EDITION - Part 4 - IATF vs new FMEA22:42
FMEA 5° EDITION - Part 5 - Severity - Occurrence - Detection at new FMEA14:32
FMEA 5° EDITION - Part 6 - new FMEA - MSR six steps16:21
FMEA 5° EDITION - Part 7 - Using Action Priority - (RPN importance?)16:46
FMEA 5° EDITION - Alignment of VDA and AIAG FMEA manuals - Part 8 and Conclusion17:56

Requirements

It is not necessary to have prior experience.

Description

Introduction to FMEA;

The main changes in the new edition;

FMEA objectives;

Integration of FMEA into the organization;

Updates to FMEAs;

Teams and responsibilities for the FMEA;

Definition of Project FMEA;

Application of the Project FMEA – DFMEA (7 steps);

Application of new severity/occurrence/detection tables;

Definition and deployment of special characteristics throughout the development of FMEAs;

Understanding the new priority logic for actions (Action Priority – AP)

Present to participants the new methodology for executing the FMEA (Project), according to the AIAG VDA FMEA manual 1st edition. Application of the Project FMEA – DFMEA (7 steps);

The purpose of FMEA is to provide a systematic approach, identifying where actions need to be directed in order to reduce the risk of errors and ensure that the causes of failure of a product or process are corrected in advance.

Product FMEA: This analyzes failures that may occur in product specifications, focusing on components and subsystems. ...

Process FMEA: Aims to analyze flaws in the planning and execution of the process and consequently improve it.

The 7 steps of the AIAG & VDA FMEA structure, see below:

1- Planning and Preparation.

2 -Structure Analysis.

3 - Function Analysis.

4 - Failure Analysis.

5 - Risk analysis.

6 - Optimization.

7 - Documentation of Results.

Who this course is for:

Directors, Managers, Engineers, Supervisors, Coordinators, etc....