Online Fire Alarm System Training Course on GST Brand

Name: Online Fire Alarm System Training Course on GST Brand
Rating: 4.0 (12 reviews)

Learn how to program addressable fire alarm system.

Created byN.K. Singh

Last updated 8/2024

English

What you'll learn

How to program GST make fire alarm system ?
How to program GST200 fire alarm panel ?
Practical Step by Step Procedures to configure addressable fire alarm system ?
Write condition and effect equation for programmed field devices

Course content

2 sections • 29 lectures • 1h 33m total length

Introduction to GST 200 panel3:13
Optional Components of GST 200 Panel4:33
Introduction to Smoke detector1:29
Explore the addressable photoelectric smoke detector DI9102E, compliant with EN 54-7 and operating at 24 v dc. It offers two sensitivity levels, a 360-degree led, and built-in remote indicator output.
Introduction to Manual call point0:52
Introduction to Sounder strobe1:09
Introduction to Sounder base0:58
About GST200N Panel6:00
About GST200N Panel LED6:15
Discover how the GST 202 panel uses LEDs to indicate fire status, faults, power, test mode, disablement, and evacuation, with red fire and pre-alarm LEDs and green power indicators.
About GST200N Panel Keypad13:32

How to program address of devices via GST programming tool P-9910B ?1:59
Overview of GST def3.0 defining tool software3:30
How to add a FACP in GST3.0 def software tool ?2:19
How to learn devices from GST200N Panel ?3:41
How to configure devices in GST3.0 software tool ?6:34
How to check learned devices from GST200N Panel ?1:14
Configure device types and label locations in the software, download to the GST fire alarm panel, and verify loop 1 lists five devices with their addresses and types.
What is C&E Equation ?5:52
How to create logical equation in GST3.0 def software tool ?2:41
How to check created logical equation on GST200N Panel ?0:41
Verify the downloaded logical equation on the GST200N panel via browse, confirming it shows as zero three for the smoke detector and sounder (type 13, address 01) with no delay.
How to check fire by activating a single smoke detector ?1:29
Activate the smoke detector at address number two to trigger a fire signal on the panel, verify the detector and downloaded equation are working, then reset the panel.
How to create & check a logical equation with delay ?5:13
How to check fire alarm by activating a smoke detector with sounder base ?1:16
How to check fault from flow switch module ?0:59
How to create & check a logical equation for flowswitch and sounder in GST200N ?1:49
Create a new equation linking the flow switch to the sounder in GST200N with zero delay, save and download it to the panel, and verify activation on the control panel.
How to create & check a fuzzy logic for two detectors activation ?3:48
How to back up & restore fire alarm database ?1:41
How to export history logs from GST200N panel ?2:58
How to export device list from GST200N panel ?1:14
How to disable and enable a device in GST200N panel ?4:09
Learn to disable and enable a GST200N panel device by resetting the alarm, using the enable/disable menu, and selecting loop 1 and address 062.
How to factory reset a GST200N fire alarm panel ?2:40

Requirements

No Prior Experience Required.

Description

Hi there! My name is Nilesh & I’m a professional fire alarm engineer active since last 13 years in fire alarm industry. I’m here to help you learn online fire alarm system efficiently and comprehensively

After completing this course, students will have a solid knowledge how to program addressable GST make fire alarm system.

The purpose of this online fire alarm training course is to cover basics to in depth knowledge of the GST make fire alarm system.

Below are the topics covered in this course:

Introduction to GST 200 panel
Optional Components of GST 200 Panel
Introduction to Smoke detector
Introduction to Manual call point
Introduction to Sounder strobe
Introduction to Sounder base
Address Programming of field devices via programming tool
Overview of GST def3.0 definning tool software
How to add FACP
How to learn loop devices on FACP
Define loop devices in GST def3.0 tool software
What is C and E equation
How to create and download C and E equation on FACP
Test fire alarm via MCP and Smoke detector
How to backup & restore fire alarm database
How to export device list from FACP
How to export history logs from FACP
How to enable and disable devices on FACP
And Many More..
At the end of this course, student will be confident how to program GST make fire alarm system.

Let's see you at my course.

Who this course is for:

To any one who is interested in learning about fire alarm system.

Online Fire Alarm System Training Course on GST Brand

What you'll learn

Explore related topics

Course content

Introduction to GST make Fire alarm panel and Field devices9 lectures • 38min

Programming of FACP and field devices20 lectures • 56min

Requirements

Description

Who this course is for: