Ansys static analysis - FEA basic course - دورة برنامج أنسيس

This is a good starting point for beginners, and also good refreshment for all FE-solver users. A 1D element static analysis tutorial studying a simple tension rod  using APDL script. The script is discussed, imported, and results are interpreted.

This is a 1D element static analysis tutorial. A simple truss consists of two links and three nodes is solved using both APDL and Ansys Workbench.

This tutorial studies a plate with a hole that is simply fixed on one side and loaded on the other. The plate is modeled using both shell and solid elements. Other fixation method called 3-2-1 is used.

Continue lecture(7)

This tutorial studies a plate with a hole that is simply fixed on one side and loaded on the other. The plate is modeled using both shell and solid elements. Other fixation method called 3-2-1 is used.

This tutorial covers the following:

-Analytical study of the cantilever

-Validation of FE results

-Parametric design study

In this lecture, a simply supported structural steel beam, exposed to uniform distributed load, is studied and validated to analytical   methods. The lecture focuses on the following:
-Analytical study
-Split face
-Applying distributed loads
-Convergence
-Construction geometries
-Charts
-Validation

In this lecture, the plasticity of a cantilever structural steel beam, exposed to high concentrated load, is studied and validated to basic knowledge related to material plastic behavior.The lecture focuses on the following:
-Theoretical background
-Imprint faces
-Time steps
-Loading and unloading
-Charts
-Spring back

This lecture covers the following:
-Basic knowledge of bolted connections
-Bolts' pretension
-Contacts definition
-Multi-zone and mapped face meshing
-Assembly and working loads steps
-Contact tools
-Discussion on results.

•Stainless steel pressure vessel and structural steel cap.

•All fillets are 5mm radius.

•4 bolts, 190mm PCD fixing the cap to a suppressed body.

•0.5 Mpa pressure inside the vessel.