ETABS v19 & SAFE v16 in Villa Structural Design in UAE+CAD

Name: ETABS v19 & SAFE v16 in Villa Structural Design in UAE+CAD
Rating: 4.3 (178 reviews)

Modeling, analysis and design of 4 stories Villa in UAE using CSI ETABS and SAFE software

Created byAhmad Traboulsi

Last updated 11/2022

English

English [Auto],

What you'll learn

Introduction to Structural design Concept
How we can begin with structural design of a Villa
Check of safety of the villa with many methods with complicated and challenged topics in structural design of the Villa
How to use ETABS and SAFE to modeling, Analysis and Design of the Villa

Course content

6 sections • 19 lectures • 4h 37m total length

Introduction to the course11:56
Discover villa structural design in the UAE using etabs v19 and safe v16, from architectural planning and column distribution to slab selection, modeling, analysis, foundation sizing, and swimming pool design.
Distribute columns and choose the structural system of the Villa + CAD37:08
Distribute first-floor columns, copy to upper floors, model slab lines, and evaluate slab options, concluding flat slab as the preferred structural system for the villa in the UAE.
Flat Slab thickness6:27
Explore the flat slab system for a four-story villa, assess thickness selection, edge beams for rigidity, and verify deflection and shear capacity under imposed loads.

Introduction part 2 waffle slab type 116:29
Explore design of waffle slab type 1 as a two-way slab, detailing rib spacing, load assumptions, panel and edge conditions, and how to model and check with etabs and safe.
Introduction part 2 Waffle Slab type 24:26
Explore waffle slab type 2 design, comparing it with type 1, using 0.8 m rib spacing, 3.5 kN/m2 loads, exterior panel edge, and beam sizing in ETABS and SAFE.
Introduction part 2 One Way Ribbed Slab2:53
Determine the one-way ribbed slab direction, set the slab alignment to the axis, and calculate thickness while applying residential live and dead loads per perimeter, with edge and drop beams.
Introduction part 2 solid slab2:50
Compare solid slab and flat slab design, determine beam sections and slopes, and apply residential panel thickness rules to define drop beam sizes for seismic performance.
Introduction part 2 Flat Slab3:02
Explore flat slab design without interior beams or ribs, using edge drop beams and a thickness around 19-20 cm, modeled with ETABS v19 and SAFE v16 for UAE villa projects.

Modeling37:10
Open Etabs v19 or Safe v16 and model a four-storey villa, defining grids, story heights, and units, then import architectural plans and set materials, slabs, walls, and columns.
Column Design19:41
Analyze a four-story villa model in ETABS to compute loads on structural elements, then design concrete columns, assign sections and reinforcements, and optimize for economical one percent reinforcement.

Flat Slab Design: Punching Shear, Deflection and Reinforcement29:01
Design a flat slab in CSI Safe, checking punching shear and short- and long-term deflection, with reinforcement design; export loads from ETABS to Safe.
Foundations Design21:15
Design villa foundations using Etabs and Safe, choosing isolated, combined, or strap foundations based on soil bearing capacity of 1.5 kg/cm2. Export loads, perform calculations, and specify bottom reinforcement.

Difference between Swimming Pool and Water tank2:33
Compare underground swimming pools and water tanks, detailing edge backfill, concrete walls, bottom reinforcement, and design steps for rectangular and circular tanks, and explain how above-ground tanks exclude soil loads.
Water Tank design in SAP200037:45
Design water tanks in SAP2000, modeling underground and above-ground tanks with raft, walls, and roof; apply water, soil, and lateral loads, perform load combinations, and design reinforcements.
Design circular section18:37
Design circular water tanks using ETABS v19 and SAFE v16 by modeling circular slabs, applying soil pressure, water loads, roof and raft detailing, and validating capacity.

Civil Engineers 2019 - Evolution of Civil3:48
Explore the evolution of civil engineering through modern villa structural design using ETABS v19 and SAFE v16, with CAD workflows in the UAE.
Civil Engineering motivational7:22
Explore civil engineering design with ETABS v19 and SAFE v16 for villa projects in the UAE, and integrate cad workflows to enhance structural analysis and creativity.
12 Steps of construction7:03
Present the 12 steps of construction, from site clearing and grid layout to excavation, PCC laying, foundation and column rebar, concreting, perimeter blocks, backfilling, tie beams, and beams and slabs.
Structural Engineer's Checklists to Site Inspection8:07
Apply structured site inspection checklists to verify excavation levels, reinforcement placement, concrete cover, and slab openings align with approved drawings, ensuring safety and code compliance in villa structural design.

Requirements

No programming experience needed you will learn everything in this course

Description

This course not just a tutorial on software ETABS and SAFE but it is a complete understanding about structural design analysis, how civil engineer must begin with the project, how he/she must think, how we can determine the dimension of the element before modeling them check it in the software. In this course we will design a 4 stories Villa in UAE, within the work we will show you how to select the best type of slab type for this Villa, also how to select the best type of foundation. Also during the design we will show very complicated and challenged topic in the structural design of the Villa for example:

1- What type of slab we must choose: Ribbed Slab, Solid Slab, Flat Slab ?

2- The largest span which increase the bending moment loads on the beams.

3- Check of the short and long term Deflection of the Slabs.

4- Select the best type of foundations (Isolated or combined or Raft foundation).

5- Design of the swimming pool of the Villa using Sap2000 Software.

6- Design of the water tank of the Villa using Sap2000 software.

In the structural design of this villa you will learn all the steps that help you to modeling analysis and design of any project in ETABS and SAFE (Import AutoCAD file, create and define grids, define materials, define sections, define loads, Modeling, Analysis of the loads, Design the structural element, export loads from ETABS to SAFE to design slabs, beams and foundation, Export from AutoCAD to ETABS learn the correct method to import AutoCAD file into ETABS.

Who this course is for:

Beginner and Expert Civil Engineering or students who want to learn structural designing.

ETABS v19 & SAFE v16 in Villa Structural Design in UAE+CAD

What you'll learn

Explore related topics

Course content

Introduction to the course3 lectures • 56min

General civil engineering knowledge5 lectures • 30min

Etabs v192 lectures • 57min

SAFE V16 Design of Slab and Foundations of the Villa2 lectures • 50min

SAP20003 lectures • 59min

Civil Engineering General Knowledge4 lectures • 26min

Requirements

Description

Who this course is for: