Udemy
    •  
    •  
    •  
    •  
    •  
    •  
    •  
    •  
Subscribe
Turn what you know into an opportunity and reach millions around the world.
Learn More
Your cart is empty.
Keep shopping
Energy Modeling (Module 8) with eQuest
Rating: 3.1 out of 5(11 ratings)
74 students

Energy Modeling (Module 8) with eQuest

Building Energy Modeling / Building Simulation / eQuest Energy Modeling / eQuest software / Learn Energy Modeling
Created byDr Sonal Desai
Last updated 11/2022
English
English [Auto],

What you'll learn

  • Energy Modelling
  • Building Simulation
  • eQuest software
  • 179D tax compliance
  • Building Energy Performance
  • Energy optimization

Course content

2 sections • 5 lectures • 40m total length

  • Parametric Runs_Part I4:06

    Learn how to use parametric runs in eQuest to apply energy efficiency measures to a building, compare results to the base case, and evaluate impacts on building performance.

  • Parametric Runs_Part II4:52

    Explore parametric runs in energy modeling with eQuest, defining global numerical parameters, adjusting efficiency, occupancy, lighting, insulation, glass properties, and geometry, then run simulations while noting practical limitations.

  • Parametric Runs_Part III8:33

    Set up global parameters in eQuest to define roof insulation and other layer properties, then run baseline and parametric simulations to evaluate energy savings and life cycle cost analysis.

Requirements

  • A desire to learn.
  • A background in engineering / Process Industry / Architect would have added advantage
  • Basic knowledge of Computer
  • Some engineering knowledge is beneficial, but lessons are explained in depth to allow students to build their knowledge from the ground up.

Description

Module 8 :

This Module consists two sections that teaches about the Parametric Run. The learnings of Sections are as following


Section 1 : This section consist theoretical lectures that provides deep learnings on Parametric Runs. Though the section is focused on the learnings of About Parametric Runs, How create this Run, Where it's possible use & where not, Steps to perform Parametric Runs & Then Practical illustration for clear understanding. So lectures are,

Lecture 1  : This lecture provides basic Understanding of Parametric runs that how it distinguish from the EEM wizard.

Lecture 2 : This lecture provides learnings on How to create Parametric Run & It's Steps as well  as Where it should be useful & Where it is not useful.

Lecture 3 : In this lecture Process from The defining of Global Parameters, Assigning of Global Parameters, Defining Parametric Runs, Defining of Parametric Components, Run Parametric Simulation to Analyse Parametric Simulation Result  are discussed.


Section 2 : In this section, particularly 2 lectures purely based on Practical illustration of Parametric runs in eQuest is Explained.

Lecture 1 : In this Lecture, How to perform Parametric Run in eQuest on a particular Model in a Very detailed manner to provide complete understating on Parametric Run.

Lecture 2 : This Lecture is about Practical way teaching on eQuest Software from Creation of Model to Performing EEM Wizard as well as Generation of Reports.


The course is useful to Architects and Engineers who wish to perform Energy Modelling of Building. The 10 Module course gives hand on practice to create the building, to apply energy efficiency measure and to predict the building performance before it is made. It is a consolidated course to understand Energy Modelling from scratch and to be expert in the same. All modules have explanation videos about What is energy modelling followed by details of eQuest software. While learning you may practice on your PC or laptop to understand the procedure and get on hand training.

Who this course is for:

  • Engineers
  • Energy consultants
  • Practicing Engineers
  • Sustainability Engineers
  • Consultants
  • Architects

Report abuse