Udemy
    •  
    •  
    •  
    •  
    •  
    •  
    •  
    •  
Subscribe
Turn what you know into an opportunity and reach millions around the world.
Learn More
Your cart is empty.
Keep shopping
Electrical Panels Design and Implementation for M.V and L.V
Rating: 3.7 out of 5(241 ratings)
1,284 students

Electrical Panels Design and Implementation for M.V and L.V

Electrical Panels building including (M.V switchgear, Elec Kiosks, RMUs, Feeder Pillars, ATS and all other L.V panels )
Created byPower Tech Academy
Last updated 6/2022
English

What you'll learn

  • you'll have a perfect overview about the Elec Panels building sector
  • you'll learn all the required processes for manufacturing the Elec panels in M.V and L.V
  • you'll have a fast revision for all basics of Electrical Power System
  • you'll learn types of Grids and how can you make the calculations for C.B rating and cable sizing
  • you'll have a perfect introduction for the M.V system including ( M.V Distribution networks, their components and configurations )
  • you'll learn all basic components for Elec panels in M.V and L.V ( C.B, LBS, Contactor, Fuse, Elec Timer, all protection devices, M.V cables, V.T, C.T …etc.)
  • you'll learn M.V Distributors {M.V Switchgears} in details ( their positions in the M.V network, basic construction, their components , …etc. )
  • you'll learn the principle of operation for V.T and C.T & Concept of Interlocking between the LBS and earth switch
  • you'll learn everything about RMUs ( their classifications, all types of RMUs, Basic construction of the RMU, Description of the RMUs , …etc. )
  • you'll learn the way of connection between the RMUs in the practical life
  • you'll learn the principle of operation for E.F.I and the capacitive Isolator
  • we'll discuss real Designs for the RMUs from the practical life
  • you'll learn everything about the Elec Kiosks in details (M.V compartment, Transformer Compartment and L.V compartment)
  • you'll learn position of Elec kiosks in the M.V network, their classifications, all their components and how can you make a description for them
  • we'll discuss the Enclosure for the Dry transformer in details
  • you'll have a perfect Introduction for the L.V Network
  • we'll discuss all types of L.V panels for the Elec Kiosks in details using real Designs from the practical life
  • we'll discuss the Feeder pillars in details
  • we'll discuss the ATS Elec panels in details using real Designs from the practical life

Course content

7 sections • 21 lectures • 4h 2m total length

  • Intro for Elec Panels Building14:27
  • Basics of Elec Power System13:48

    Explore the basics of the electrical power system, including generation, transmission and distribution. Understand single-phase and three-phase systems, star and delta connections, ohm's law, and active, reactive, and apparent power.

  • Elec Panels manufacturing part 15:11

    Explore mv and lv electrical panels design and implementation, with emphasis on manufacturing concepts in part 1 of electrical panels manufacturing.

Requirements

  • Having some pretty simple basics of electricity.
  • passion and determination to learn be at its highest level !!!!

Description

Hello guys in Our Course you will learn All the required processes to Make manufacturing for any Elec Panel including ( Design & Implementation ), in our Course we will have an overview about M.V and L.V Networks then we'll discuss all basic components to make any Elec panel.


  • This course is designed to teach students how to design an Electrical Panel to perform a specific desired function. Taking this course will give students a much better understanding for the most complicated Electrical Panels which they will face in the real life whatever for M.V or L.V. so our course aims to teach students the fundamentals of Electrical Panels design.  Starting from Basic Components ( Contactor - C.B - Relays - Timers - Elec switches - Fuses - Protection devices - Load Break Switches - Current and Voltage transformers- M.V cables- earth switches- E.F.I ), then we'll discuss the basic concepts for the Design like " positions of these Elec panels in the Distribution network- the interlocking between LBSs and Earth switches- ..etc.", after that we'll discuss every Elec panel in details theoretically, using Graphic videos and practically.

  • This course is structured in such a way that each section is dedicated to a specific topic in regards to Electrical Panels Design and implementation. The lectures contained in each section describe in detail the different tools and techniques used to design the Electrical panels for M.V and L.V.

  • we have separated Lectures for Lab, so you can get the most benefit from this course.

    Plan of Our Course will be like that :

    1- section (1) :  ( Introduction for Electrical Panels Building     )

       - Overview for Electrical Panels Building sector including all required processes for manufacturing the Elec panels
       - Basics of Electrical Power system
                     
    2- section (2) :  ( Basic requirements for Electrical Panels Building )

        - Types of Grids, C.B rating and cable sizing
        - Introduction for M.V system (M.V Distribution networks, their components and Configurations)

        - Basic Components for Elec Panels in M.V and L.V ( Contactors, Elec Switches, C.B including {withdrawable C.B, ACB,           
          MMCB, MCB}, Elec fuses, Elec Timers, Overload relay, Over-Under Voltage relay, phase Sequence- phase failure relay,
          LBS { Air-Vacuum-SF6}, Earth Switches, M.V cables, C.T and V.T )

       
    3- section (3) :  ( M.V Distributor )

         - Position of Distributor in M.V Network, all types of cells for M.V distributor
         - All Components and Elec Devices for the M.V distributor
         - Concept of Interlocking between LBS and earth switches & principle of operation for C.T and V.T & Graphic video for
           M.V distributor in details

    4- section (4) :  ( Ring Main Units )

        - Position of RMU in the M.V Network
        - Basic Construction for the RMU, all types and Classifications for the RMU
        - Description of RMU and principle of operation for E.F.I and Capacitive Isolator

    5- section (5) :  ( Electrical Kiosks and Enclosure of Dry transformer )

         - Position of Elec Kiosk in the M.V Network
         - Basic construction for Elec Kiosk, all types for Elec Kiosks

         - Description of Elec Kiosks, earthing system for Elec panels
         - All components for Elec Kiosks ( Fans of Ventilation- Hygrostat- Fire Fighting Equipment - Elec heaters- E.F.I ….etc.)
         - Enclosure for Dry Transformer in details


    6- section (6) :  ( L.V Panels for Electrical kiosks )

           - Introduction for L.V Network
           - L.V panels for all types of Elec Kiosks in details


    7- section (7) :  ( Feeder pillars & ATS Elec Panels )

           - Position of feeder Pillars in L.V network
           - Basic Construction of Feeder Pillars and street lighting panel in details

           - ATS Elec panels in details
       

    ** Our help in " Power Tech Academy " is always available to you if you get stuck or have a question !!!
      our support is legendary in Udemy


    --> So don't hesitate and click " Buy Now " button so you can begin on the right path!

Who this course is for:

  • Electrical Panels Designers & Electrical production engineers for the Electrical panels in the M.V and L.V
  • All who work in the Electrical Infrastructure for M.V and L.V
  • Maintenance engineers & Facility management engineers
  • Electrical technicians and Students of Engineering
  • All who work in the Construction field
  • Electrical engineers in the Industrial sector

Report abuse