Electrical Designing & Drafting Course (Division 2)

Electrical Designing & Drafting (Section 3 & 4)

This complete course "Electrical Designing & Drafting" is divided into 4 Sections, 3 Sections deals with designing part and the last part is for Drafting section.  Following are the topics to be covered in this course:

Section 1:

1. Introduction

2. Basics of electrical

3. Basic formulae

4. Codes, Standards &  Lux Levels

5. Illumination Design

6. Basics of Air Conditioner

7. Circuit Breakers

8. Capacitor Banks

Section 2:

1. Electrical Designing (Complete Flat Designing with real-time example)- [One Assignment for students]

2. Electrical Motors

3. Electrical Transformer

4. Diesel Generator

5. UPS

   
   

Section 3:

1. Cables & Cable Sizing

2. Voltage Drop Calculation

3. Short Circuit Calculation

4. Cable Tray Size Calculation

5. Earthing

6. Project

Section 4:

1. AutoCAD

2. DiaLUX

"It is always my endeavour to fill a large gap which is left between an academic pass out and a field working person with my experience."

Chapter_14 Power Cables

In this chapter we will cover the following topics:

• Introduction of Power Cables

• Available sizes of Cables

• Parts of Power Cable

• Types of Insulation

• Some Special points related to Power Cables

• Introduction of steps involved in the calculation of Power Cable

  
  

Chapter_14 Power Cables

In this chapter we will cover the following topics:

• Introduction of Power Cables

• Available sizes of Cables

• Parts of Power Cable

• Types of Insulation

• Some Special points related to Power Cables

• Introduction of steps involved in the calculation of Power Cable

Chapter_14 Power Cables

In this chapter we will cover the following topics:

• Introduction of Power Cables

• Available sizes of Cables

• Parts of Power Cable

• Types of Insulation

• Some Special points related to Power Cables

• Introduction of steps involved in the calculation of Power Cable

Chapter_14 Power Cables

In this chapter we will cover the following topics:

• Introduction of Power Cables

• Available sizes of Cables

• Parts of Power Cable

• Types of Insulation

• Some Special points related to Power Cables

• Introduction of steps involved in the calculation of Power Cable

Chapter_14 Power Cables

In this chapter we will cover the following topics:

• Introduction of Power Cables

• Available sizes of Cables

• Parts of Power Cable

• Types of Insulation

• Some Special points related to Power Cables

• Introduction of steps involved in the calculation of Power Cable

Chapter_14 Power Cables

In this chapter we will cover the following topics:

• Introduction of Power Cables

• Available sizes of Cables

• Parts of Power Cable

• Types of Insulation

• Some Special points related to Power Cables

• Introduction of steps involved in the calculation of Power Cable

Chapter_14 Power Cables

In this chapter we will cover the following topics:

• Introduction of Power Cables

• Available sizes of Cables

• Parts of Power Cable

• Types of Insulation

• Some Special points related to Power Cables

• Introduction of steps involved in the calculation of Power Cable

Chapter_14 Power Cables

In this chapter we will cover the following topics:

• Introduction of Power Cables

• Available sizes of Cables

• Parts of Power Cable

• Types of Insulation

• Some Special points related to Power Cables

• Introduction of steps involved in the calculation of Power Cable

Chapter_15 Voltage Drop Calculation

In this chapter, we will cover the essential concept related to the power cable i.e. "Voltage Drop Calculation". This chapter consists of voltage drop i.e. how to find out the voltage drop from sending end to receiving end. Without this concept designing is incomplete.

So concentrate and practice.

Chapter_15 Voltage Drop Calculation

In this chapter, we will cover the essential concept related to the power cable i.e. "Voltage Drop Calculation". This chapter consists of voltage drop i.e. how to find out the voltage drop from sending end to receiving end. Without this concept designing is incomplete.

So concentrate and practice.

Chapter_15 Voltage Drop Calculation

In this chapter, we will cover the essential concept related to the power cable i.e. "Voltage Drop Calculation". This chapter consists of voltage drop i.e. how to find out the voltage drop from sending end to receiving end. Without this concept designing is incomplete.

So concentrate and practice.

Chapter_16 Short Circuit Calculation

In this chapter, we will cover the most essential concept related to the power cable i.e. "Short Circuit Calculation". This chapter consists of Short Circuit Current i.e. how to find out the short circuit current value for every cable and without this concept designing is incomplete.

So concentrate and practice.

Chapter_16 Short Circuit Calculation

In this chapter, we will cover the most essential concept related to the power cable i.e. "Short Circuit Calculation". This chapter consists of Short Circuit Current i.e. how to find out the short circuit current value for every cable and without this concept designing is incomplete.

So concentrate and practice.

Chapter_16 Short Circuit Calculation

In this chapter, we will cover the most essential concept related to the power cable i.e. "Short Circuit Calculation". This chapter consists of Short Circuit Current and circuit breaker tripping time i.e. how to find out the short circuit current value for every cable and what should be the tripping time for the circuit breaker and again without this concept designing is incomplete.

So concentrate and practice.

Chapter_16 Short Circuit Calculation

In this chapter, we will cover the most essential concept related to the power cable i.e. "Short Circuit Calculation". This chapter consists of Short Circuit Current and circuit breaker tripping time i.e. how to find out the short circuit current value for every cable and what should be the tripping time for the circuit breaker and again without this concept designing is incomplete.

So concentrate and practice.

Chapter_16 Short Circuit Calculation

In this chapter, we will cover the most essential concept related to the power cable i.e. "Short Circuit Calculation". This chapter consists of Short Circuit Current and circuit breaker tripping time i.e. how to find out the short circuit current value for every cable and what should be the tripping time for the circuit breaker and again without this concept designing is incomplete.

So concentrate and practice.

Chapter_17 Cable Tray

In this chapter we will cover the following topics:

• Introduction of Cable Trays

• The material used for Cable Trays

• Available size of Cable Trays in market

• Different types of cable tray

• Introduction of steps involved in the calculation of Cable Tray

After the completion of this chapter, you can able to find out the size and type of cable tray for any building.

Chapter_17 Cable Tray

In this chapter we will cover the following topics:

• Introduction of Cable Trays

• The material used for Cable Trays

• Available size of Cable Trays in market

• Different types of cable tray

• Introduction of steps involved in the calculation of Cable Tray

After the completion of this chapter, you can able to find out the size and type of cable tray for any building.

Chapter_17 Cable Tray

In this chapter we will cover the following topics:

• Introduction of Cable Trays

• The material used for Cable Trays

• Available size of Cable Trays in market

• Different types of cable tray

• Introduction of steps involved in the calculation of Cable Tray

After the completion of this chapter, you can able to find out the size and type of cable tray for any building.

Chapter_18 Earthing

In this chapter we will cover the following topics:

• Difference between "Grounding & Earthing"

• Introduction of Earthing

• Purpose of Earthing

• Materials required for earthing

• Size of Earthing Strip, Earthing Rod available in market

• Steps involved in Earthing Calculation

After the completion of this chapter, you can able to find out the size and resistance of earthing strip, a number of earthing pits and etc. for any building.

Chapter_18 Earthing

In this chapter we will cover the following topics:

• Difference between "Grounding & Earthing"

• Introduction of Earthing

• Purpose of Earthing

• Materials required for earthing

• Size of Earthing Strip, Earthing Rod available in market

• Steps involved in Earthing Calculation

After the completion of this chapter, you can able to find out the size and resistance of earthing strip, a number of earthing pits and etc. for any building.

Chapter_18 Earthing

In this chapter we will cover the following topics:

• Difference between "Grounding & Earthing"

• Introduction of Earthing

• Purpose of Earthing

• Materials required for earthing

• Size of Earthing Strip, Earthing Rod available in market

• Steps involved in Earthing Calculation

After the completion of this chapter, you can able to find out the size and resistance of earthing strip, a number of earthing pits and etc. for any building.

Chapter_18 Earthing

In this chapter we will cover the following topics:

• Difference between "Grounding & Earthing"

• Introduction of Earthing

• Purpose of Earthing

• Materials required for earthing

• Size of Earthing Strip, Earthing Rod available in market

• Steps involved in Earthing Calculation

After the completion of this chapter, you can able to find out the size and resistance of earthing strip, a number of earthing pits and etc. for any building.

Chapter_18 Earthing

In this chapter we will cover the following topics:

• Difference between "Grounding & Earthing"

• Introduction of Earthing

• Purpose of Earthing

• Materials required for earthing

• Size of Earthing Strip, Earthing Rod available in market

• Steps involved in Earthing Calculation

After the completion of this chapter, you can able to find out the size and resistance of earthing strip, a number of earthing pits and etc. for any building.

"AutoCAD: An Essential Training"

In this training, you will learn AutoCAD from base Zero i.e. if you are new for this software so not to worry. You will be trained in a very unique way because I will train you to work with the keyboard (without using screen icons) and actually this is the way of professionals.

So just learn and start practice.

"AutoCAD: An Essential Training"

In this training, you will learn AutoCAD from base Zero i.e. if you are new for this software so not to worry. You will be trained in a very unique way because I will train you to work with the keyboard (without using screen icons) and actually this is the way of professionals.

So just learn and start practice.

"AutoCAD: An Essential Training"

In this training, you will learn AutoCAD from base Zero i.e. if you are new for this software so not to worry. You will be trained in a very unique way because I will train you to work with the keyboard (without using screen icons) and actually this is the way of professionals.

And in this complete training following are the commands:

1. Function Keys

2. Control Keys

3. AutoCAD Settings

4. Project Settings

5. Drawing Commands

6. Modifying Commands

7. Editing Commands

8. Helping Commands

9. Practice Exercise

So just learn and start practice.

"AutoCAD: An Essential Training"

In this training, you will learn AutoCAD from base Zero i.e. if you are new for this software so not to worry. You will be trained in a very unique way because I will train you to work with the keyboard (without using screen icons) and actually this is the way of professionals.

And in this complete training following are the commands:

1. Function Keys

2. Control Keys

3. AutoCAD Settings

4. Project Settings

5. Drawing Commands

6. Modifying Commands

7. Editing Commands

8. Helping Commands

9. Practice Exercise

So just learn and start practice.

"AutoCAD: An Essential Training"

In this training, you will learn AutoCAD from base Zero i.e. if you are new for this software so not to worry. You will be trained in a very unique way because I will train you to work with the keyboard (without using screen icons) and actually this is the way of professionals.

And in this complete training following are the commands:

1. Function Keys

2. Control Keys

3. AutoCAD Settings

4. Project Settings

5. Drawing Commands

6. Modifying Commands

7. Editing Commands

8. Helping Commands

9. Practice Exercise

So just learn and start practice.

"AutoCAD: An Essential Training"

In this training, you will learn AutoCAD from base Zero i.e. if you are new for this software so not to worry. You will be trained in a very unique way because I will train you to work with the keyboard (without using screen icons) and actually this is the way of professionals.

And in this complete training following are the commands:

1. Function Keys

2. Control Keys

3. AutoCAD Settings

4. Project Settings

5. Drawing Commands

6. Modifying Commands

7. Editing Commands

8. Helping Commands

9. Practice Exercise

So just learn and start practice.

"AutoCAD: An Essential Training"

In this training, you will learn AutoCAD from base Zero i.e. if you are new for this software so not to worry. You will be trained in a very unique way because I will train you to work with the keyboard (without using screen icons) and actually this is the way of professionals.

And in this complete training following are the commands:

1. Function Keys

2. Control Keys

3. AutoCAD Settings

4. Project Settings

5. Drawing Commands

6. Modifying Commands

7. Editing Commands

8. Helping Commands

9. Practice Exercise

So just learn and start practice.

"AutoCAD: An Essential Training"

In this training, you will learn AutoCAD from base Zero i.e. if you are new for this software so not to worry. You will be trained in a very unique way because I will train you to work with the keyboard (without using screen icons) and actually this is the way of professionals.

And in this complete training following are the commands:

1. Function Keys

2. Control Keys

3. AutoCAD Settings

4. Project Settings

5. Drawing Commands

6. Modifying Commands

7. Editing Commands

8. Helping Commands

9. Practice Exercise

So just learn and start practice.

"AutoCAD: An Essential Training"

In this training, you will learn AutoCAD from base Zero i.e. if you are new for this software so not to worry. You will be trained in a very unique way because I will train you to work with the keyboard (without using screen icons) and actually this is the way of professionals.

And in this complete training following are the commands:

1. Function Keys

2. Control Keys

3. AutoCAD Settings

4. Project Settings

5. Drawing Commands

6. Modifying Commands

7. Editing Commands

8. Helping Commands

9. Practice Exercise

So just learn and start practice.

"AutoCAD: An Essential Training"

In this training, you will learn AutoCAD from base Zero i.e. if you are new for this software so not to worry. You will be trained in a very unique way because I will train you to work with the keyboard (without using screen icons) and actually this is the way of professionals.

And in this complete training following are the commands:

1. Function Keys

2. Control Keys

3. AutoCAD Settings

4. Project Settings

5. Drawing Commands

6. Modifying Commands

7. Editing Commands

8. Helping Commands

9. Practice Exercise

So just learn and start practice.