Deploy SIParator Teleworker Gateway for Mitel MiVC 6900s

Name: Deploy SIParator Teleworker Gateway for Mitel MiVC 6900s
Rating: 4.0 (1 reviews)

All you need to know for Mitel Mivoice Connect Telworkers deployments

Created byErnesto Casas

Last updated 6/2022

English

English [Auto],

What you'll learn

Understand Teleworker deployments for Mitel MiVC 6900 series
Configure MiVC using Director to support Teleworkers
Configure SIParator to support 6900s endpoints for Teleworker Deployments
Be able to make your own deployment by looking to live demonstration

Course content

1 section • 7 lectures • 2h 53m total length

Introduction23:19
This will introduce the scope of this training and make an initial presentation of the Solution architecture
MIvoice Connect Configuration15:59
In this Lecture you will learn what is needed to configure in Mivoice Connect via Director to add SIParator Appliance as a Teleworker Gateway for 6900 series.
SIParator Configuration52:57
In this lecture you will learn main elements and network scenarios impacting SIParator configuration. Also you'll learn implications associated to use the SIParator for more than one purpose, including SIP Trunking in addition to Teleworker Gateway.
SSL/TLS Certificates - Setup and Configuration32:07
In this lecture you will learn how SSL/TLS is used in this deployment scenario, as well as how to obtain, or create the apprppriate certificates and where to use them.
Additional Setup and Interop10:52
In this lecture you will learn additional configuration needs including Interoperability paramenters as well as Session Media attributes.
HTTP Services22:46
In this Lecture you will learn about the most important component of this use case. HTTP Services is the key component to allow all advanced telephony services in Teleworker's endpoints to work properly
Ready to Setup your endpoints and validate15:54
In this lecture you will be ready to deploy teleworkers 6900 endpoints and be able to test some of the functionalities.

Requirements

Good Understanding of Mivoice Connect and some experience using Director
Be familiar with SIParator configuration interface
Good Understanding of SIP Protocol
Good Understanding of SSL/TLS
Good Understanding of HTTP protocol

Description

This training is a step by step instructions and demonstration on how to Deploy Mitel Teleworkers for 6900 series using Ingate SIParator as a Teleworker Gateway.

After this training you will be able to desig, plan and deploy Teleworkers in your existing Mitel Mivoice Connet platform version 19.3, using Mitel Phones from 6900's series, Ingate SIParator version 6.4.

You will learn about specific challenges, including what happen when you plan to use an existing SIParator already in use for other purposes such as SIP Trunking.

Lectures includes:

1. Introduction and Solution architecture

2. MiVC Configuration

3. SIParator Configuration, challenges and networking needs

4. Certificates

5. Additional Setup and Interoperability needs

6. HTTP Services

7. How to test your 6900 endpoints.

If you are involved with existing or potential new Mitel Mivoice Connect deployments, and have plans to upgrade to release 19.3, Teleworkers functionality will be a must have if you have remote workers in need to get the same level of telephony services they get in a local endpoint. This training will walk you thru the process of configuring and deploying such solution.

Investing around 3 hours going through this lectures, you can speed up your deployment process and avoid making mistakes from the beginning.

Who this course is for:

Existing Mitel Mivoice Connect Administrators
Mitel Mivoice Connect pre-sales engineers
VoIP and Network Administrators