Udemy
    •  
    •  
    •  
    •  
    •  
    •  
    •  
    •  
Subscribe
Turn what you know into an opportunity and reach millions around the world.
Learn More
Your cart is empty.
Keep shopping
Dental Course : Prepare your STL Teeth Model for 3D Printer
Rating: 4.3 out of 5(10 ratings)
877 students

Dental Course : Prepare your STL Teeth Model for 3D Printer

Prepare your STL Teeth Model File for Printing By make important Changes in the Model using Software called Meshmixer.
Created byAhmed metwalli
Last updated 6/2021
English
English [Auto],

What you'll learn

  • Dentists Will Learn How to Prepare The Teeth Model .STL File for the 3D Printer.

Course content

1 section • 6 lectures • 29m total length

  • Move - Rotate - Change Scale for the Tooth STL Model or Guide7:55

    Move, rotate, and change the scale of the tooth STL model and its guide for precise 3d printing, using transform tools to adjust orientation and size.

  • 2 - Cut the Excess Material in the teeth model or the guide4:15

    Cut excess material from the teeth model or guide using the cutting tool, managing visible and invisible sides. Rotate to trim evenly and reduce waste and cost.

  • 3 - Close the Holes in your STL Tooth Model2:21

    Use the inspector tool to identify and close holes in your STL tooth model with auto repair, reducing printer errors and speeding up the 3D printing process.

  • 4 - Make a Teeth Virtual Extraction for STL Model.5:13

    learn to perform a virtual extraction of a tooth in a teeth model using Meshmixer, selecting with a brush, refining the cut, and smoothing edges for print-ready STL.

  • 5 - Make Hollowing to the Tooth Model and Test Strength5:14

    Learn to hollow a dental STL model to reduce material cost while maintaining at least a 2 mm wall, and run a strength test to identify weak points before printing.

  • 6 - make a Good Base for your STL Teeth Model4:36

    Create a solid base for your STL teeth model by extruding and smoothing the area, then hollow the model to save material, ensuring a print-ready foundation for a 3D printer.

Requirements

  • There is No Prerequisites for this Course.

Description

Prepare your STL Teeth Model File for Printing By make important Changes in the Model using Software called Meshmixer.

in this Course we will Learn :

1 - Move - Rotate - Change Scale for the Tooth STL Model or Guide.

2 - Cut the Excess Material in the teeth model or the guide.

3 - Close the Holes in your STL Tooth Model.

4 - Make a Teeth Virtual Extraction for STL Model.

5 - Make Hollowing to the Tooth Model and Test Strength.

6 - make a Good Base for your STL Teeth Model.

- you will Learn how to Move the STL Model and Changes its Original Orientation in the X Y Z directions .

- you will Learn also how to Rotate the Teeth Model 180 degree to make any Process easily on the model.

- we will learn how to use many tools like Plane cut tool that we use for cutting all the extra  material in the model or the Surgical Guide.

- We will learn How to close the Holes in the model So it could be printed easily without errors.

- We will learn How to make a virtual extraction for the tooth we want in the model By Choosing the tooth and make some instructions to make right Virtual Extraction.

- We will learn also by Hollowing the model we can save 75 % of the material consumed on the printing.



Who this course is for:

  • This Course is made for Dentists Mainly and Dental CAD Designers.

Report abuse