Udemy Business

Teach on Udemy

Turn what you know into an opportunity and reach millions around the world.

Learn More

Your cart is empty.

Keep shopping

VFD Basics with Real Applications Supported by PLC & HMI

Name: VFD Basics with Real Applications Supported by PLC & HMI
Rating: 4.1 (35 reviews)

Learn AC Drive (VFD) Basics with Real Hardware (Supported By PLC & HMI & Modbus and Softwares)

Created byDerstagram Akademi

Last updated 9/2021

English

What you'll learn

Delta AC Drives
Modbus Communication
HMI Programming
DOPSoft
ISPSoft
Plc Programming Basics
Motor Control Basics
AS200 Series Plc Basics
Technical Informations About Industrial Automation
Applications and Realities
VFD Basics
PID Control of VFD
VFDSoft
Schneider ATV12 VFD
Schneider VFD Control Methods
Schneider VFD Basics
Lenze VFD
Lenze 8200 Vector
GDC (Global Drive Control)

Course content

9 sections • 97 lectures • 10h 25m total length

System Overview5:05
Students are going to learn that system overview of this course
Keypad Display Descriptions5:27
Students are going to learn that keypa display descriptions
How to Factory Setting VFD3:46
Students are going to learn that how to factory setting of vfd
Terminal Diagram - Connections etc. of VFD8:11
Students are going to learn that what is a terminal diagram and how to use it.
Control VFD via Keypad Up/Down and Run/Stop Buttons3:43
Students are going to learn that how to control vfd via keypad
How to Set Frequency via Digital Potentiometer1:53
Students are going to learn that how to set frequency via digital potentiometer
How to Control Fan of VFD2:34
Students are going to learn that how to control fan of vfd
Control VFD Via External Terminals6:56
Students are going to learn that how to control vfd via external terminals
Control VFD Via AVI (0-10V) with Potentiometer4:42
Students are going to learn that how to set frequency via AVI with potentiometer
Ramp Stop - Coast Stop5:11
Students are going to learn that how to use ramp and coast stop
Direction Control and Activation of Motor3:30
Students are going to learn that how to activate or disactivate rotation of motor
Acceleration and Deceleration time and Effects of Them5:29
Students are going to learn that how to use acceleration and deceleration time of vfd
How to Change Motor Direction without Parameter or VFD usage3:30
Students are going to learn that how to change motor direction without parameters
MultiFunction Output Relay Usage6:12
Students are going to learn that how to use multifunction output relays
What is VFD as Technically AC-DC-AC and Speed Formula10:54
Students are going to learn that what is vfd
Button - Relay - Potentiometer and Resistor Basics11:29
Students are going to learn that what is button, relay ,potentiometer and resistor
V/F Curve and Applications of V/F21:12
Students are going to learn that how to use v/f curve and also what is v/f curve.
2-Wire and 3-Wire Connection of VFD11:30
Students are going to learn that how to use 2-wire or 3-wire connection with vfd
How to See Latest VFD Error within Parameters3:30
Students are going to learn that how to see latest errors of vfd within parameters
How to Use DC Brake6:11
Students are going to learn that how to use dc brake
How to Run VFD with Jog4:28
Students are going to learn that how to use jog in delta vfds
Base Block - How to Use and How it is Effecting to VFD3:14
Students are going to learn that how to use baseblock in delta vfds
MultiSpeed Commands Usage from External Terminals10:05
Students are going to learn that how to use multispeed commands via external terminals
How to Set Frequency via Button with External Terminals4:21
Students are going to learn that how to set frequency via button
PID Technical Informations9:53
Students are going to learn that pıd technical informations
PID Application Basics7:07
Students are going to learn that how to do a pid application basics.
PID Mode and WakeUp- Sleep Time9:00
Students are going to learn that how to adapt pid mode wakeup - sleep time in delta vfds
PID Another Setpoint Selection Info2:04
Students are going to learn that how to select another pid setpoints
PID Application Technically Info Before Application Video5:53
Students are going to see that how to build application environment in this tutorial.
PID Application - Important !22:59
Students are going to learn that how to use PID for VFD setpoint frequency.
Digital Potentiometer & Delta VFD5:16
Students are going to learn that how to control delta vfd via digital potentiometer.

How to Download Softwares ?2:52
Students are going to learn that how to download plc softwares
First Project - Upload - Download - Commgr settings etc.7:45
Students are going to learn that how to create first project and how to upload and download project.And also how to do a settings of commgr.
Bit Logic Basics5:10
Students are going to learn that bit logic basics of plc
Timer Usage2:26
Students are going to learn that how to use timers in plc
Counter - Increment - Up - Rising Edge Usage4:37
Students are going to learn that how to use counter , increment , up , down or rising edge instructions in plc
Math Instructions2:43
Students are going to learn that how to use math instructions in plc
Move Instruction2:21
Students are going to learn that how to use move instruction.
HWConfig and Details8:47
Students are going to learn that how to use hwconfig and it's details in plc.

VFD Modbus Communication Parameters6:40
Students are going to learn that what is vfd modbus communication parameters
Modbus Addresses and Explanations4:37
Students are going to learn that what is modbus addresses and it's explanations.
Write Setpoint Frequency to VFD via Modbus9:47
Students are going to learn that how to write setpoint frequency to vfd
Write Run/Stop - Fw/Bw Data to VFD and Get Status of AC Drive via Modbus13:16
Students are going to learn that how to write run/stop or fw/bw datas to vfd
External Fault - Reset VFD and Read 8 Data of VFD via Modbus9:24
Students are going to learn that how to use external fault
User Defined Parameter and Read Potentiometer via AVI and Read it via Modbus6:18
Students are going to learn that how to use user defined parameter and how to read potentiometer value via modbus from external terminals

How to Download Dopsoft ?1:58
Students are going to learn that how to download dopsoft software
First Project - Numeric Display and Numeric Input - Frequency to VFD via HMI5:35
Students are going to learn that how to create first project and how to use numeric display and input
Momentary- Maintained Buttons - Run Fw/Bw VFD via HMI4:11
Students are going to learn that how to use momentary and maintained buttons and how to run vfd bw or fw
Output Frequency - Current etc. - Show on HMI9:25
Students are going to learn that how to show output frequency , current etc. on HMI
Alarms - External Fault - Show on HMI7:33
Students are going to learn that how to use Alarms and External fault on HMI
Reset VFD Error via HMI5:52
Students are going to learn that how to reset vfd error via HMI
How to Use LED on HMI3:16
Students are going to learn that how to use Led on HMI

How to Download VFDSoft0:03
Students are going to learn that how to download VFDSoft software
Cabling - USB TO RS232 - RS232 TO RS4851:43
Students are going to learn that what we need as cable for create a connection between pc and vfd
How to Go Online to VFD via VFDSoft and Quick Setup6:21
Students are going to learn that how to go online to vfd via VFDSoft
Parameter Section4:44
Students are going to learn that vfdsoft software's parameter section
Keypad Simulator3:36
Students are going to learn that vfdsoft's keypad simulator
Advanced4:37
Students are going to learn that vfdsoft's advanced section.
Trends5:49
Students are going to learn that how to use trends in vfdsoft
Engineering Diagnostics1:51
Students are going to learn that how to use engineering diagnostics.

Delta VFD Basics -1 - Serial Codes and Explanations9:08
Students are going to learn that delta vfd basics with theorotical informations.
Delta VFD Basics - 2 - VFD Features - Optional Cards9:36
Students are going to learn that delta vfd basics with theorotical informations.
Delta VFD Basics -3 - C family16:51
Students are going to learn that delta vfd basics with theorotical informations.
Delta VFD Basics -4 - MS300 VFDs6:14
Students are going to learn that delta vfd basics with theorotical informations.
VFD Plc Programming Basics - Theorotical17:12
Students are going to learn that delta vfd basics with theorotical informations.

Introduction to ATV12 VFD4:22
Students are going to learn that basics of atv12 vfd and introduce with it.
Technical Information about ATV127:15
Students are going to learn that technical informations about atv12 vfd.
Control VFD with Button and Potentiometer and Small Application Test7:34
Students are going to learn that how to control vfd with button and potentiometer.
Disactivate OPF2 Error for Test VFD without Motor6:47
Students are going to learn that how to disactivate OPF2 error for test vfd without motor
2-Wire and 3-Wire Connection of VFD11:00
Students are going to learn that how to use 2-wire or 3-wire connection of Schneider vfd
Maximum and Minimum Frequency Adaptation of VFD5:34
Students are going to learn that how to adapt max and min frequency.
How to Adapt Acceleration and Deceleration Time of VFD5:40
How to adapt acceleration and deceleration time of vfd.
Analog Input Adaptation via Parameter4:24
Students are going to learn that how to adapt analog input parameter.
Relay Output Usage of VFD4:46
Students are going to learn that how to use relay output of vfd.
Modbus(RS-485) Comm. Parameters Adaptation8:28
Students are going to learn that how to adapt rs485 communication parameter of atv12.
PLC - ATV12 Modbus Communication Example22:53
Students are going to see that how to communicate with Schneider vfd via plc application in this section.
Download Files0:03
Students can download tutorials files via this link.
SOMove Software8:39
Students are going to learn that how to use somove software and what is it ?

Introduction to Hardware5:24
Students are going to learn that what is lenze vfd and hardware basics of it .
Software Download2:04
Students are going to learn that how to download GDC Software
3 Ph Motor Connection and Motor Basics6:12
Students are going to learn that what is 3 ph motor and it's basics.
Lenze VFD Technical Connection Informations5:19
Students are going to learn that what is a connection diagram of lenze 8200 vector vfd.
How to Go Online - Read Parameters and Save Parameters5:02
Students are going to learn that how to go online and read parameters.And also save parameters to computer.
Let's Control VFD via PC(GDC Software)7:47
Students are going to learn that how to control vfd via computer.
Motor Data Parameter of VFD and Save Parameter to EEPROM as PowerFail Proof6:03
Students are going to learn that how to enter motor parameters and how to save parameters in remain memory.
How to Do Factory Settings of Lenze VFD4:19
Students are going to learn that how to do factory reset to lenze vfd via gdc software.
Auto-Tuning3:06
Students are going to learn that how to do an auto-tuning to motor with lenze vfd.
Acc/Dec Time & Jog Frequency4:38
Students are going to learn that how to adapt acc/dec times and jog frequencies.
Application Part - Let's Control VFD via Terminals & Analog Input14:38
Students are going to learn that how to control lenze vfd via analog input and digital input terminals.
GDC - Function Blocks4:27
Students are going to learn that how to use Function Blocks in GDC.

Requirements

You need to be willing to learn and be patience .You need to keep following instructions and applications carefully

Description

Dear Students,

We prepared applications for you by using delta vfd , schneider vfd , lenze vfd with real hardware.

You will see how we can control a 3 phase motor.

You will see how the parameters of vfds affect the motor.

We read all the values of the vfd over Modbus communication and wrote the values to the vfd.

We run the vfd with the keypad on it.

We run the vfd with the buttons on it.

We run the vfd frequency with digital potentiometer or up and down keys.

At the same time, we checked the vfd with the external terminals.

We wrote a frequency value to the vfd with an external potentiometer.

We controlled the vfd with serial communication over PLC and wrote all frequency values over communication.

At the same time, we gave the forward-reverse and stop-run commands of the vfd over communication.

We have programmed the terminals on the vfd and made applications for you to do almost any application.

We did PID control with the vfd.

We applied different voltages to the vfd and the motor, applied dc brakes and monitored all results.

With the Dopsoft program, we made control the vfd via hmi.

While learning dopsoft on the one hand, we showed all the values of the vfd on the screen with dopsoft on the other hand.

And we wrote to the vfd from the HMI .

We learned about plc programming by making small applications with basic plc programming training.

With the VFDSoft program, we connected to the vfd and checked the vfd on the computer.

We backed up the vfd parameters and uploaded the backed-up parameters to the vfd.

We watched and recorded the vfd's information with the trend.

We have seen how we can easily change the parameters of the vfd with vfdsoft.

With schneider VFD sections, you can learn that complete parameter structure of Schneider vfds.

Also , in Lenze VFD section , you can learn that basics of Lenze 8200 vector vfd and also how to control it via pc or via terminals.

Shortly , what you will learn

- Delta AC Vfds

- Delta VFD Parameters and Applications

- Schneider ATV Vfds

- Schneider ATV12 VFD Applications

- Schneider ATV12 VFD Control Methods

- VFDSoft

- ISPSoft

- Basics of Plc Programming

- AS200 Series Plc

- DOPSoft

- DOP 100 HMI Basics

- Complete Modbus (RS-485) Communication

- PID Control

- Motor Control for Different Conditions and Applications

- Lenze 8200 Vector VFD

- Global Drive Control (GDC) Software

And much more than these.

You can learn deeply how to control vfds with different brand vfds.

If you stuck at any point that you can ask a question directly to us.

Who this course is for:

Anyone wanting full control of delta vfds
Anyone who wants to do modbus communication with Delta vfds
Anyone who wants to use delta vfds in all kinds of applications
Anyone who wants to improve plc programs and applications

VFD Basics with Real Applications Supported by PLC & HMI

What you'll learn

Explore related topics

Course content

Delta EL VFD Applications31 lectures • 3hr 35min

ISPSoft8 lectures • 37min

Application - PLC Side6 lectures • 50min

Dopsoft7 lectures • 38min

VFDSoft8 lectures • 29min

VFD Basics - Technically5 lectures • 59min

Motor Direct Driving - Let's Learn EKTS7 lectures • 31min

Schneider ATV Series VFD Basics13 lectures • 1hr 37min

Lenze 8200 VFD Basics & GDC12 lectures • 1hr 9min

Requirements

Description

Who this course is for: