
This course contains the use of artificial intelligence.
Every app, bank transfer and AI chatbot runs inside a building most people never see. This course shows you how those buildings are designed, in plain language and without vendor lock-in.
One running project, start to finish
You will follow CW-1, a 10 MW Tier III facility in Calabarzon, Philippines, with an enterprise colocation hall and an AI hall full of liquid-cooled GPU racks. Every section adds one layer to its design.
What you will learn
Foundations: the six building blocks of a data center, the language of resilience (N, N+1 and 2N, components versus paths), and the Uptime Institute Tiers I to IV.
Standards: how ANSI/TIA-942-C Rated levels and BICSI 002 fit alongside the Tiers, and why the weakest subsystem sets the overall rating.
Site and planning: choose a site with a weighted scoring matrix, size IT load and total facility power, and lay out white space and gray space.
Power: follow electricity from the utility to the server through switchgear, transformers, UPS, generators and transfer switches, plus redundancy topologies, grounding and electrical safety.
Cooling: the ASHRAE inlet envelope, CRAC and CRAH units, chillers and economizers, hot and cold aisle containment, liquid cooling from rear doors to direct-to-chip and immersion, and how to measure PUE honestly.
Infrastructure and operations: network spaces and structured cabling, racks and floor loading, fire detection and suppression, physical security, BMS, EPMS and DCIM monitoring, commissioning Levels 1 to 5, and day-to-day operations.
AI data centers: what changes when racks draw well over 100 kW, including power shelves and higher-voltage DC, warm-water liquid cooling, back-end GPU networks, heavy racks and layout in scalable units.
Capstone: rebuild CW-1 end to end, decision by decision, with the reason for each choice.
How the course works
Lessons are whiteboard-style videos. Most are followed by a downloadable worksheet or checklist, and each section closes with a short quiz.
Please note: this course builds design literacy. It is not an engineering license, and real projects still need licensed engineers and local codes.