Your cart is empty.
Keep shopping
- Explore by goal
- Learn AI
Teach on Udemy
Turn what you know into an opportunity and reach millions around the world.
Learn MoreCreo Parametric- CAD Professional
Rating: 4.2 out of 54.2(191 ratings)
777 students
Creo Parametric- CAD Professional
PTC Creo : Learn of Part,Sheet metal, Surface modeling, Assembly,Drawing View ,Mechanism,Animation,Rendering
Created bySwaylen CAD I CAM I CAE Expert
Last updated 5/2022
English
English
What you'll learn
- You will Learn Creo Parametric Advance Courses
- Sketch Geometry Creation
- Sketch Geometry Modification
- 3d Solid Geometry Creation
- Advance 3d Modeling
- 3d Solid Geometry Modification
- Sheet Metal Module
- Surface Modeling
- Assembly Modeling
- Drawing View
- Material and Rendering
- Mechanism
Explore related topics
Course content
13 sections • 133 lectures • 17h 26m total length
- L-2 Create line and different type option10:05
In this video, you will learn basic line create an option in Creo Parametric
- L-3 Create Circle and use different type option7:29
- L-4 Create Arc and different type option11:00
Learn to create arcs in Creo Parametric using multiple options: three-point, tangent end, center, three tangent, concentric, and conic, with practical steps to set radii, apply dimensions, and constrain geometry.
- L-5 Create Line- tangent and use different type option4:59
Learn to create lines by tangent to circles using the line tangent option, including using two tangency points and line chain, and understand tangency constraints in Creo Parametric.
- L-6 Create Rectangle and different type Option6:47
Explore rectangle creation in Creo Parametric with corner, slanted, center, and parallelogram options, adjusting dimensions and angles to produce custom rectangles.
- L-7 Create Ellipse and different type option3:21
Create ellipses in Creo Parametric using axis ends ellipse and center and axis ellipse, and adjust dimensions and points to define the ellipse shape.
- L-8 Create Spline and use different option2:11
Create spline lines for free work by clicking points and freely adjusting values. Learn to build and modify splines by adding first, second, third, and fourth points.
- L-9 Create Text and Option7:21
- L-10 Geometric Construction Option1:50
Master the geometric construction option in Creo Parametric by using construction mode to create circles from center points and reference lines, adjust diameters, and manage construction versus reference geometry.
- L-11 Geometric Selection Method2:27
Explore one-by-one, chain, geometry, and all selection methods in Creo Parametric. Learn how to select lines and chains, observe selection feedback, delete selected objects, and use the all-selection shortcut ctrl+alt+a.
- L-12 Set working directory2:27
Set and manage the working directory for sketches in Creo Parametric, selecting the save path (drive and folder), and open or create sketches within that configured path.
- L-1 Fillet Option4:13
- L-2 Chamfer Option3:58
Explore the chamfer option and chamfer trim option in Creo Parametric, applying chamfers to edges with two different distances and understanding when trim is used.
- L-3 Offset Option5:54
Learn to use the offset option in Creo Parametric, including single, chain, and loop modes, offsetting objects in same or opposite directions with positive and negative values.
- L-4 Thicken Option5:26
- L-5 Palette Option8:04
Master the palette option in Creo Parametric, creating polygons from triangles to twenty-sided shapes, adjusting scale and rotation from a base point, then shaping arcs, ovals, and stars.
- L-6 Construction Datum Option2:16
- L-7 Modify Option2:01
Use the modify option in the editing session to change a dimension by double-clicking, selecting modify, and entering a new value. See how distance values adjust with the medium sensitivity.
- L-8 Mirror Option4:30
Master the mirror option in Creo Parametric to create mirrored objects from a center line, adjust distances, and use tangent lines for accurate geometry.
- L-9 Divide Option4:01
Explore the divide option by partitioning lines into specified parts with custom distances or equal spacing, dividing circles into parts, creating precise points, and deleting extra divisions and construction lines.
- L-10 Delete Segment4:48
- L-11 Corner Option2:12
Explore the corner option in Creo Parametric, connecting lines with corner joints, controlling extrapolation, and creating or removing corners to constrain line connections.
- L-12 Rotate Resize Option6:28
Learn to use the rotate and resize option in Creo Parametric to adjust scale, rotate around a base or center point, and apply precise dimensions.
- L-13 Constrains Options11:27
- Exercise File For Sketcher0:10
Access the exercise file for the sketcher module in the Swaylen training session to practice core sketching techniques and build CAD proficiency.
- L-1 Introduction About Working Window Of Solid Creation4:01
Learn the solid creation working window in Creo Parametric, including part setup, model options, datum and sketch tools, and shaping operations like extrude, revolve, sweep, and shell.
- L-2 Extrude Command Part-19:10
Master the extrude command in Creo Parametric by turning sketches into solids and surfaces, controlling depth, thickness, flip direction, taper, and caps.
- L-3 Extrude Command Part-29:20
Master the extrude command in Creo Parametric by applying depth options, removing material, and selecting references, faces, edges, or points to shape objects.
- L-4 Object Creation With Clip Model Option4:42
Learn how to create parts in Creo Parametric with extrude and clip mode, forming a center rectangle and arcs, adding circular and square holes, and using flip direction.
- L-5 Visual Style And Parallel Or Perspective View 1 To 23:50
Explore visual style and parallel or perspective view in Creo Parametric by creating a center rectangle 10 by 10 with extrude and fillets, then compare shading options.
- L-6 Revolve Command10:12
Master the revolve command in Creo Parametric to create 360-degree and 180-degree solids from sketches, manage centerlines, flipping, thickness, depth, removal of material, and preview results.
- L-7 Create Pulley With The Help Of Revolve Command6:29
Create a pulley in Creo Parametric using the revolve command. Build the sketch with center lines, tangents, and concentric circles to define the pulley geometry.
- L-8 Sweep Command10:27
Explore the Creo Parametric sweep command by creating or editing sweep sections, distinguishing closed-loop and open-loop options, and switching between solid and surface results with caps and thicken.
- L-9 Variable Sweep Section7:12
Create a variable-sweep section in Creo Parametric using two sketches and a center line, select a section plane with normal to projection, and perform the sweep.
- L-10 Helical Sweep10:13
Learn to use helix sweep to create a helix and threads, set planes and sketches, define circle diameter 10, adjust pitch, and thicken into a solid or surface.
- L-11 Create Thread With The Help Of Helical Sweep5:17
Create threaded features on a part using helical sweep in Creo Parametric, defining reference geometry, pitch, and removed material to produce square and acme threads.
- L-12 Volume Helical Sweep10:15
Learn to create a volume helical sweep in Creo Parametric by defining a helix profile and axis. Adjust pitch, tilt angle, and left- or right-handed orientation to preview 3D results.
- L-13 Create Twist Drill With The Help Of Volume Helical Sweep5:25
Learn to create a twist drill in Creo Parametric using a volume helical sweep. Sketch, mirror, and set helix axis and pitch to finalize the drill geometry.
- L-14 Swept Blend Command10:19
- L-15 Create Crank Hook With The Help Of Swept Blend14:28
- L-16 Blend Command7:13
Explore the blend command in Creo Parametric to create solids from multiple section sketches, adjust section values, apply thickness, and control start and end tangency.
- L-17 Create Part With Blend Command12:27
- L-18 Rotational Blend Command Part-16:43
Demonstrates how to create a rotational blend using multiple section sketches at defined angles and diameters, with center lines and thickness settings.
- L-19 Create Object With Rotational Blend Command6:13
- L-1 Hole Command18:05
- L-2 Round Command10:23
Explore the round command in Creo Parametric, applying circular and conic fillets on edges, adjusting d1 d2 and c2 sets, and using extend surface, patch, and intersection options.
- L-3 Auto-round Command5:08
Create an extruded object in Creo Parametric and apply auto-round. Edit convex outside and concave inside radii, adjust edges, and note chamfer options in the next lecture.
- L-4 Chamfer Command7:13
Explore the chamfer command in Creo Parametric by selecting edges, adjusting d into d or o into o dimensions, and using patch, intersection, or corner plain transitions.
- L-5 Corner Chamfer Command3:48
Create a 100 by 50 center rectangle on the top plane, extrude to depth 20, then apply and edit corner chamfers on all four corners using three dimensions.
- L-6 Draft Command12:42
- L-7 Variable Pull Direction Draft Command3:59
Create a three-dimensional object by extruding a 50 by 50 feet rectangle to height 10, then apply variable pull direction draft on the top face, selecting edges.
- L-8 Shell Command9:12
Learn how to use the Creo Parametric shell command to create hollow objects, set inner or outer thickness, edit per-face thickness, and remove faces for complex shells.
- L-9 Profile Rib Command5:08
- L-10 Trajectory Rib Command5:55
Master the trajectory rib command in Creo Parametric to add a supporting rib for multiple plates, including sketching top faces, applying draft, tangent rounds, and auto round adjustments.
- L-11 Mirror Command10:07
Master the mirror command in Creo Parametric by selecting a mirror plane and mirroring features. Use the auto round option with a 7 radius to refine the mirrored geometry.
- L-12 Pattern Command25:33
Master the pattern command in Creo Parametric to create dimension, direction, axis, fill, table, curve, and point patterns, including circular and spiral patterns with spacing, radius, and rotation.
- L-13 Geometry Pattern6:30
- L-14 Toroidal Bend Command5:52
Learn to create toroidal bends on a plate by extruding the object, then applying the toroidal bend command with reference geometry, 360-degree bends, and coordinate-based adjustments.
- L-15 Create Part With The help of Toroidal Bend Command Part-17:47
Create a part with Creo Parametric using the toroidal bend command, incorporating extrusion, patterning, and mirror operations to finalize a complex geometry.
- L-16 Create Part With The help of Toroidal Bend Command Part-28:50
Create a part with toroidal bend in Creo Parametric by modeling with extrude, revolve, and sweep, including offset loops, fillets, pattern, and a 360-degree bend.
- L-17 Spinal Bend Command5:29
Explore the spinal bend command in Creo Parametric to bend a plate from a sketch, adjust bend geometry, and set the lock length.
- L-18 Create Part With The Help Of Spinal Bend Command4:55
Create a Creo Parametric part using the spinal bend command after extruding a sketch, applying fillets and autoround, and finishing with rendering.
- L-19 Cosmetic Commands8:53
- L-20 Designated Area And ECAD Area Commands5:54
Create designated area and ECAD area in Creo Parametric by selecting lines and sketches, editing definitions, flipping options, and adjusting 3D volume and hedge to shape the part.
- L-21 Lattice Command6:42
Explore the lattice command in Creo Parametric, adjusting lattice type, axis, scaling, and shell to create a 2.5d lattice on an extruded object.
- L-22 Model Properties7:17
Learn to use model properties in Creo Parametric to assign materials, compute area, volume, density, mass, and center of gravity, generate mass properties reports, and explore unit and accuracy settings.
- L-23 User Defined Feature Command5:15
Master the user defined feature (urif) library in Creo Parametric to save complex objects and reuse them across parts.
- L-24 Family Table Command10:50
Create and configure a family of parts in Creo Parametric using the family table to vary hexagon length, diameter, and height, with insert and delete rows and incremental values.
- L-25 Orient And Section Commands13:57
Master orient and section commands in Creo Parametric by using the view manager to create multiple views, set planes and offsets, and customize cross sections.
- L-1 Offset Feature3:03
Create a sheetmetal part and use the offset feature to add material on the upper or lower side, setting face, thickness, flip orientation, and preview solid or surface results.
- L-2 Roll Bend In Planer Bend4:28
Explore roll bend in planer bend on a sheet metal plate, setting bend radius, thickness, and direction, using sketch view and edit definitions to adjust radius and flip side.
- L-3 Angle Bend In Planer Bend4:43
Learn planer bend operations in sheet metal by creating a rectangle, selecting faces, applying bend angles and radii, and flipping bend sides.
- L-4 Bend Feature, Unbend Feature, Bend Back Option13:39
Explore bend feature, unbend feature, and bend back option in Creo Parametric for sheet metal parts, adjusting bend angles, thickness, and flip directions with previews.
- L-5 Flat Option8:57
- L-6 Flange Option10:48
Explore the flange option in Creo Parametric for sheet metal parts, including creating, editing, unbending, flipping, and applying relief and various flange shapes.
- L-7 Twist Operation5:43
Explore the twist operation in sheetmetal design within Creo Parametric, creating a plate, setting edge twists, adjusting length and rotation angles, and previewing results.
- L-8 Punch Form5:08
- L-9 Sketched Form6:00
- L-10 Convert To Part In Sheetmetal10:57
Convert a solid part to sheet metal, create the shell, and generate a flat pattern. Explore corner relief options: v notch, normal, circular, square, rectangular, obround.
- L-1 Trim Option3:13
Utilize the trim option in surface modeling to trim sketches by sketch and by plane, using sketch face selection, preview, and flip direction to control trim outcomes.
- L-2 Extend Option3:49
Explore the extend option in Creo Parametric, extend edges with preview, flip the extension, and extend along the original surface or to a reference plane.
- L-3 Merge Option3:13
Master the merge option in Creo Parametric by selecting multiple extrude features, enabling merge, and finalizing the merged object, as demonstrated with face selection, direction control, and default orientation.
- L-4 Offset Option7:58
Explore the offset option in Creo Parametric: create offsets on extruded faces, choose inside or outside, apply draft or angle, and use special handling with expand features.
- L-5 Intersect Option4:01
Explore the intersect option in Creo Parametric to combine extruded shapes, apply fillets, create sections for sweeps, and prepare for elliptical and square helical paths.
- L-6 Create Elliptical And Square Helical Path With The Help Of Intersect Option6:35
Create elliptical and square helical paths in Creo Parametric using the intersect option, with step-by-step instructions on building ellipses and squares, applying helix sweeps, and performing intersections.
- L-7 Project Option5:23
Learn to use the project option in Creo Parametric by extruding, sketching circles, sweeping profiles, and patterning features along an axis to model complex surfaces.
- L-8 Thicken Option4:38
Explore the thicken option in Creo Parametric, applying thickness to faces, flipping direction for outside, inside, or both sides, and choosing fill or remove material with previews.
- L-9 Solidify Option2:59
Learn to convert surfaces to solids using the solidify option in Creo Parametric, by applying extrude operations, merge steps, and orientation adjustments.
- L-10 Boundry Blend Option5:27
Explore the boundary blend option in Creo Parametric by creating three sketches on planes, projecting them, and shaping the boundary blend with direction options like fill, tangent, curvature, and normal.
- L-11 Fill Option3:54
- L-12 Create Mouse With The Help Of Surface Commands10:16
learn to create a mouse in Creo Parametric using surface commands, from sketching on planes and mirroring to boundary blends, merges, sweeps, extrudes, and fillets that form a solid.
- L-1 Assemble Part With Constrains18:26
Assemble parts with constraints in Creo Parametric by creating multiple parts, applying coincident, tangent, parallel, and center relationships, and building fully constrained assemblies.
- L-2 Create Simple Assembly (Marine Type Connecting Rod End)9:30
Create a marine type connecting rod assembly in Creo Parametric by building parts, applying coincident and tangent constraints, fixing positions, and using pattern features to complete the assembly.
- L-3 Feed Check Valve Assembly12:00
Explore the feed check valve assembly in Creo Parametric by assembling multiple parts using center axis constraints and coincident alignments, then pattern and finalize with rendering and material options.
- L-4 Create Part In Active Assembly11:50
Create parts in an active assembly using extrude, revolve, and pattern features, then assemble parts with axis and coincident constraints, adjust dimensions, and preview shaded visuals for material discussions.
- L-5 Apply Material In Assembly Drawing7:17
- L-6 Create Orient And Section In Assembly Drawing10:08
- L-7 Create Animation for Assemble And Disassemble Drawing24:10
Learn to create an assembly animation in Creo Parametric by defining parts, capturing snapshots, and animating motions to produce assemble and disassemble videos.
- L-1 Creation Of Main View And Projection View9:11
- L-2 Change The Model Scale And Sheet Size7:33
Explore how to change the model scale and sheet size in Creo Parametric, using default and custom scales, and switching between A4, A3, A2, A1, A0 formats with custom dimensions.
- L-3 View Style, View Display And Visible Area13:43
Master view style, view display, and visible area in Creo Parametric by configuring projection and orientation, exploring isometric, trimetric, and user defined views, and various visibility options.
- L-4 Section View Creation And View States13:57
Learn section creation and view states in Creo Parametric, including 2D/3D cross sections, isometric views, and explode view customization with default and custom configurations.
- L-5 Different View And Add New Model In Sheet10:16
Learn to create and manage a drawing sheet in Creo Parametric by adding multiple models and using projection, detail, auxiliary, and revolve views, including new templates, orientations, and view manipulation.
- L-6 Creation Of Dimension In Drawing View16:54
Learn to create automatic and manual dimensions in a Creo Parametric drawing view using model annotation, covering tangent, mid-point, intersection, and surface dimensions.
- L-7 Create Ordinate Dimension And Note5:56
Learn to create ordinate dimension and auto ordinate dimension and various notes in Creo Parametric, including unattach note, offset note, on item note, and leader note with text edit options.
- L-8 Generate Bill Of Material19:53
Learn to generate and customize the bill of materials in Creo Parametric, using assembly bill of materials tables, repeat region, material assignment, and balloons by view and by component.
- L-1 Apply Material In Drawing12:32
Apply material in drawing by selecting appearance from the material library and assigning metals, plastics, glass, or wood to surfaces or parts, then edit color, reflectivity, glossiness, and textures.
- L-2 Rendering In Drawing12:11
- L-3 Set Scene In Drawing7:31
Learn to set scenes in a drawing using Creo Parametric, apply materials, render in render studio, and save high-resolution JPEG images across multiple scenes.
- L-4 Set Environment In Drawing12:19
Learn to set up and customize environment in a drawing within Creo Parametric, selecting environment presets, and adjusting intensity, rotate, height, zoom, shadow, and reflection before rendering final images.
- L-5 Set Light In Drawing21:05
Set and tune lighting in a Creo Parametric drawing by applying bulb, spot, and distance lights, adjusting intensity, color, shadow softness, and render settings.
- L-6 Set background In Drawing7:24
Explore setting the drawing background in Creo Parametric by choosing color, image, blend, or environment, then render the object at high resolution (sample 15) in the desktop view.
Requirements
- Basic knowledge for Computer aided design-Drafting
- Install PTC Creo Parametric software 6.0 or old version in one months or one year
- Download our section wise practice guidance file and print this file.
- No prior knowledge. Just the desire to learn and create awesome stuff
Description
>> Course Description
This is a streamlined course to take you from knowing nothing about PTC Creo parametric/ Pro-Engineering to give you all the knowledge and skills needed to become a PTC Creo Parametric Certified professional. This course should enable you to, with confidence, use PTC Creo parametric to design your next innovation. After this course, you can proudly list your PTC Creo parametric skills in your resume.
We are following a learn-by-doing approach for you to truly master all the skills needed for the certification test.
You can perfectly follow this course if you have PTC Creo parametric versions 3.0, 4.0, 5.0, and 6.0. However, this course is delivered using PTC Creo Parametric 6.0
>> About this course
With this course, you will get:
All future extra lectures and upgrades will always be free.
Unconditional Udemy 30 days money-back guarantee - We are sure you would love the course though
Regular free bonus additions to increase your knowledge. - lots of fun topics!
Today, you can start your journey to becoming a Creo Parametric designer
>> Why our course?!
We are following the learning by doing approach which is proven the best for learning software like PTC Creo Parametric
We have enlarged the interface icons in our screencasts to make our videos more eye-friendly. We even enlarged the mouse cursor!!
We use annotations in all our lectures for easier follow-up.
We made our videos short and concentrated on one or a few aspects to make them easier for reference. We also designed each lecture to be a stand-alone lecture.
We have uploaded a section-wise practice guide book.
>> You will learn the section module in this course
Geometric sketch module
Geometric sketch modify the module
Geometric solid modeling module
Geometric solid modify the module
Tips of Basic part modeling with object creation
Geometric Advance solid modeling module
Tips of Advance Part modeling with object creation
Family geometric
Sheet metal module
Create sheet metal fabrication drawing
Surface modeling
Assembly module
Drawing View
Animation module
Mechanism module
Rendering module
Who this course is for:
- Engineering student
- Production Engineers
- Mechanical engineers
- Designers, Engineers, Makers, and Hobbyist