Creating First Project in Revit Architecture

Create a new architecture template project in imperial units, rename and add levels (first floor, second floor, lower roof, upper roof, top of footing), and save with backups.

Explore how to start a Revit project by creating labels, using reference planes, applying copy constraints, and wall creation, including importing CAD files and managing pin and lock options.

Create an exterior wall using the wall command, selecting a 12 inch generic wall, with location finish space exterior from the first floor to the lower roof.

Trim and extend the exterior wall on the first floor, change it to 12 inch masonry, join and align walls to the reference plane, and lock them.

Create interior walls in Revit by placing a generic five inch wall on the first floor center line, lock to a reference plane, then extend to second floor upper roof.

Duplicate and rename a 6.5 in wall, set width to 6.5 in, verify dimension; duplicate first floor plan as foundation plan, switch to structural, and align walls to reference planes.

Learn to create and configure floors in Revit, including duplicating floor types, setting six inch thickness, applying negative offsets, trimming geometry, and flipping floor direction with pick wall.

Create the second floor plan using a 12 inch floor with zero offset, trim and join lines, then review the result in 3d view before saving the project.

Create roofs by footprint and by face, set wall overhangs, and define a two inch vertical, twelve inch horizontal slope, then attach the roof to interior and exterior walls.

Place doors on the first and second floors in Revit by loading door families, selecting sizes such as 36 by 84 and 36 by four, flipping orientation with spacebar.

Load and place window types on first and second floor plans, align centers with equality, adjust view range, tag, copy, and create a 36 by 72 window for 3d view.

Place and configure stairs in Revit Architecture using the circulation panel, choose straight stairs and predefined types, set risers and floor boundaries, edit paths, and add rails in 3d views.

Learn to convert standard walls into curtain walls, compare curtain wall types (glass, exterior glazing, storefront), and apply curtain grids and mullions with adjustable spacing.