Udemy
    •  
    •  
    •  
    •  
    •  
    •  
    •  
    •  
Turn what you know into an opportunity and reach millions around the world.
Learn More
Your cart is empty.
Keep shopping
Configure Juniper SRX Router using J-Web
Rating: 4.5 out of 5(127 ratings)
4,038 students

Configure Juniper SRX Router using J-Web

Understand how to configure the Juniper SRX router using J-Web to share internet to the LAN devices
Created byMy Network Training
Last updated 12/2020
English
English [Auto],

What you'll learn

  • Connecting via console to the Juniper SRX Router
  • Understanding the steps need to allow the Juniper SRX router to share internet
  • Use J-Web to configure the Juniper SRX Router
  • Test the configuration done on the SRX Router

Course content

1 section • 5 lectures • 38m total length

  • Main steps needed to access the Juniper SRX router2:21

    Access the Juniper SRX router using J-Web by powering on, loading or resetting to the default configuration via the console port, then wiring an internet port to begin configuration.

  • Connecting to Juniper SRX via console and reset it to the factory default10:17

    Connect to the Juniper SRX via console and reset to factory default using the command line interface, set a root password, and enable web management with J-Web.

  • Understand the steps needed to be done before starting the configuration5:15

    Prepare the Juniper SRX router for configuration by connecting a PC, confirming the DHCP server assigns a 192.168.1.x IP, then access J-Web at 192.168.1.1 to log in.

  • Configuring the Juniper SRX Router using J-Web10:58

    Learn to configure a Juniper SRX router using J-Web, including basic setup, zones, DHCP and DNS, user roles, firewall policy, and management access.

  • Testing the configuration and see options available on J-Web9:21

    Test and validate the Juniper SRX configuration via J-Web, verifying saved settings, internet connectivity, and navigable dashboard options, including firewall, VPN, and routing features.

Requirements

  • No prior prerequisites is required to follow this course

Description

In this course, I will show you how you can connect to the Juniper SRX router using console and J-Web, and how to configure the router using J-Web to share internet to the inside LAN devices.

We will pass through the understand of DHCP Client, DHCP Server, Network Address Translation (NAT), and much more.

You require to have 1 SRX Juniper router to be able to follow the LABS of this course

I hope you will enjoy it.

Who this course is for:

  • Anyone internet to know how to configure Juniper SRX router to provide internet service

Report abuse