Complete AutoCAD 2D&3D From Zero to Hero Course

This lecture explains the absolute coordinate system in AutoCAD, where points have x and y values (z zero in 2d). It shows entering hash coordinates like 0,0 to create lines.

Practice line creation in AutoCAD 2D, mastering horizontal, vertical, and inclined lines with precise lengths and angles, including 45, -45, and 135 degrees.

Learn to create polylines in AutoCAD by combining lines and arcs, adjusting width and start/end points, toggling auto mode, and editing vertices.

Practice polyline creation in AutoCAD through a structured exercise, using auto mode to draw polylines with specific widths and lengths, including horizontal segments and precise endpoints.

Master circle practice in AutoCAD 2D by creating circles with radii 25 and 35, using center and tangent snaps, drawing a 150 unit line, and adding center marks and dimensions.

Master AutoCAD arc creation using start center end and three-point methods, with radius, angle, and chord length, specifying start, center, and end points.

Learn to create rectangles in AutoCAD from coordinates and dimensions, rotate at 45 degrees, and apply chamfer or fillet, including area-based sizing and origin-based placement.

learn to create polygons in AutoCAD using the polygon tool, setting radius, sides, and edge length, and choosing inscribed or circumscribed circles with p or l shortcuts.

Practice polygon construction in AutoCAD by creating circles of specified radii, forming inscribed and circumscribed polygons, adjusting edge length to 25, and enabling auto mode for horizontal alignment.

Practice creating an ellipse and elliptical arc in AutoCAD, adjusting end points and dimensions with auto mode and line tools to reproduce a step-by-step ellipse exercise.

Learn how to set a hatch origin in AutoCAD by using the origin panel to place the origin at a corner or center, enabling hatches to start from any location.

Always use outer island detection for hatch creation in AutoCAD; click the location and close hatch to hatch only that area, as other island detection options are rarely used.

Learn to create and switch between separate and combined hatches in AutoCAD, using hatch options to create, locate, and separate hatch patterns.

Discover how to create construction lines in AutoCAD, including horizontal, vertical, and angled options, using the X line command to establish reference and endless lines.

Create ray lines in AutoCAD by using the ray tool to draw one-direction endless lines, specifying a start point, and adjusting with auto mode for horizontal or vertical directions.

Learn to use AutoCAD's measure tool to divide and measure lines into equal segments of a specified length, applicable to lines, arcs, and splines.

Create revision clouds in AutoCAD using rectangular, polygonal, or freehand styles, convert objects, and adjust arc length and direction by typing rev c.

Learn to use the move command in AutoCAD: select objects, specify a base point and a second point, and adjust movement with polar tracking, snaps, and coordinates.

Learn how to use the rotate command in AutoCAD, rotating objects by a point and angle. Understand positive angles for counterclockwise rotation, negative for clockwise, with copy and reference options.

Master the mirror command in the modify panel to create mirrored copies by selecting objects, defining a mirror line, and using auto mode with polar tracking and text mirroring.

Master the AutoCAD scale tool from the modify panel, set a base point and scale factor, and use quick properties, copy, and reference options for correct scale and PDF imports.

Master the AutoCAD fillet tool to create rounded corners on lines and polylines, adjust radii (10, 15, or 0), and use trim or no-trim options with undo and shortcuts.

Apply the chamfer command from the modify panel to set first and second distances on lines or polylines, or switch to angle method with a length and angle.

Apply blend curves in the modify panel to create tangential blends between lines and splines, adjust modes via grips, and use the blend shortcut to quickly create blends.

Learn how to create and edit a rectangular array in AutoCAD, adjusting columns, rows, and distances, making associative arrays, changing base points, and replacing or editing items across the array.

Master the erase command in AutoCAD by using the modify panel, selecting objects, and pressing enter or typing E to delete single or multiple items, or using the delete key.

Explore the explode tool in AutoCAD to break apart rectangles, polylines, blocks, and arrays into single lines or objects, using the modify panel or the x shortcut.

Learn to use the offset command in AutoCAD: set distance, offset in or out, apply multiple offsets, undo and exit with escape, and adjust gap type and radius.

Explore the lengthen command in AutoCAD, adjusting line and arc lengths with delta and angle options, using percentage and total length controls, and mastering dynamic length adjustments.

Use the align tool to position objects by selecting multiple source points and corresponding destination points, placing doors and windows inside and outside walls with precise alignment.

Learn how to use the reverse tool in AutoCAD to flip directions of lines, polylines, and splines, adjust reverse width, and edit vertices in the properties panel.

Learn to copy nested objects in AutoCAD by using the modify panel to copy blocks or external references, selecting specific nested elements, and placing copies at multiple locations.

Delete overlapping and duplicate objects in AutoCAD using the overkill feature. Select all, press enter, and confirm to clean the drawing and ensure crisp prints.

Create and modify single line text in AutoCAD by using the annotation tools, setting start point, height, rotation, justification, and text properties like color, content, width factor, and oblique angle.

Create and modify new text styles in AutoCAD, choosing font and style (annotative or standard), height, and effects, then apply them to single-line text and manage current styles.

Master how to create and modify multi-line text in AutoCAD, using the text editor to set height, font, formatting, justification, columns, masks, symbols, and spell check.

Learn to create radius dimensions in AutoCAD using the annotation panel, select a circle or arc, place the radius inside or outside, and use shortcuts d or a.

Master creating diameter dimensions in AutoCAD by using the annotation panel, selecting diameter for circles or arcs, placing inside or outside, and using the ddi keyboard shortcut.

Learn to create a jogged dimension for circles and arcs in AutoCAD, using the annotation panel and jog dimension option, with center location overrides and the d j o shortcut.

learn to create dimension ordinate in AutoCAD, placing points from origin along x and y directions, using linear dimensions and alternate dimension with the dor shortcut.

Learn to create a continue dimension in AutoCAD 2D by using the annotate tab, selecting the continue dimension tool, and applying shortcuts like d c to draw and press escape.

Modify dimensions in AutoCAD using grips to stretch, move with dimension lines and the leader, flip arrows, and place baseline, aligned, and angular dimensions.

Learn to create multiple types of dimension with a single tool in AutoCAD 2D&3D, including linear, line, radius, diameter, angular, baseline, alternate, and align dimensions.

Master breaking and removing breaks on dimension and extension lines with the annotate tab, using the Break or Restore Dimension Tool, selecting and applying or removing the break.

Adjust the space between dimensions using the annotate tab, select a base dimension, then space the other dimensions to equal spacing, choosing auto or entering a value.

Learn how to add or remove inspection information in dimensions using the annotate tab, adjust inspection labels and rates, and center text with dimension style settings.

Learn how to re-associate a dimension in AutoCAD by using grips, the annotate tab, and selecting the dimension and object to update its start and end points.

Learn to create and customize a center mark in AutoCAD by using the annotate tab, selecting a circle, and configuring extensions and a 45-degree rotation.

Open the dimension style manager, select and modify a dimension style’s color, arrow, text, and overall scale; set current, delete or rename styles, and create new ones.

Compare dimension styles in AutoCAD using the dimension style manager to spot differences between dash 30 and ISO 25, including decimal separator, color, line type, and spacing, then apply changes.

Learn to create primary and alternate units in a dimension style, set up via the dimension style manager, and customize formats, precision, prefixes, and suffixes for engineering or architectural units.

Learn to create multileaders (MLD) in AutoCAD by configuring leader style, arrowhead size, text content and font, and adjusting attachments in the annotation panel.

Explore options in multi leader in AutoCAD, including LiDAR type, leader type (straight or spline), content type (MText, None, Block), landing, max points, and angle constraints.

Create and customize new multileader styles in AutoCAD by configuring leader format, arrowhead type, and content options like text or block with default text, scale, and landing distance.

learn to insert symbols into table cells, including degree and diameter symbols, using the text editor and multiline text tools, with font adjustments and copy-paste from other apps.

Export and import AutoCAD tables by linking Excel data with a new data link, update linked tables to reflect Excel changes, and export to CSV or Excel formats.